on Cuto SN ff IE AR20 Series FEATURES Easy accessibility Interchangeable ballast pods Ease of maintenance Optional light control Standard Cut IES off With optional FDR INSTALLATION The luminaire will mount to a 3" OD post or tenon with 5/16" black oxide coated stainless steel square head set screws to ensure a solid connection. The diffuser will be held to the fitter by (4) 5/16 black oxide coated stainless steel captive square head set screws. ELECTRICAL High power factor ballast (HPF), core and coil type, pre-wired and tested (NPF available) Easy ballast pod access 4KV porcelain socket ETL label “suitable for wet location” DIFFUSER CHOICES Clear textured polycarbonate (PC-CL) White textured polycarbonate (PC-WH) FINISH premium quality thermoset polyester powdercoat DUF3/AR20 16" 16" 34" 31" 33" DUF1-AR20 16" 16" 16" DUF3-AR20 DUF4-AR20 32" 31" DUF37-AR20 DUF34-AR20 Light Control Options 16" 30" DUF38-AR20 Standard Photometry LVR 4 Tier Anodized Aluminum Louver FDR Faceted Downlight Reflector Fax: 281.997.5441 0. 25 50 00 L3 or L5 Type III (L3) or Type V (L5) Glass Refractor 0. 1. 800.364.0098 05 10 0. HSS House Side Shield 0. www.amerluxexterior.com AR20 Assembly with 175MH lamp 14,000 Lumen 12' Mounting Height Grid Spacing is 12' Optical Assembly Details (Example shown: DF3-AR20) Textured diffuser 4kv Porcelain socket Cast Aluminum plate with keyhole slots for easy tool-less access to electrical assembly Multitap HID Ballast Assembly Please specify desired voltage to terminal block. (4) 5/16" Black oxide coated stainless steel square head set screws See pages 3-8 for fitter selections and features. Ordering Guide Fitter Diffuser Diffuser Material-Color Light Source Voltage Finish Light Control Options Optional Photocell DUF3-AR20 PC-CL / 100HPS - 120v / BLK / L3 / PCL-TW PC-WH 100MH, 150MH 208v CLB, GRN L5, LVR 175MH, 250MH 240v TBK, ACT FDR, HSS 150HPS, 250HPS 277v GTG Additional light sources, voltages, and custom colors are available. Contact factory for details. 16