E-bar™ II
Electronic Bar Code Printing System
E-Bar ™ II Printing System
fast, reliable slide label printing
Designed to make your NexES ® IHC, NexES Special Stains, BenchMark® and
DISCOVERY® series systems even faster and easier to use
E-bar™ II
Electronic Bar Code Printing System
E-Bar II
99 Prints every label without any label waste
99 Easy to use software
99 Simple label and ribbon loading
99 Now enabled for LIS connectivity
99 Prints 2 times faster (5 in./sec., 203 dpi)
than original Ebar printer
99 Extended label avoids over labeling.
General Characteristics
System Includes: Catalog Number 1632800
• Print up to 5 lines of customer defined text and a bar code on each label
(up to 7 lines with extended label).
• E-Bar™ II Printer (All required hardware included)
• 1 Print Ribbon* (Prints 8,100 Labels)
• 540 Labels* (1 Roll)
• Full 1-year Warranty
• Printing flexibility allows user to select barcodes or plain text labels for H&E and
other applications.
• Specific physicians panels and custom templates can be developed and saved.
• Labels are heat and chemical resistant.
• Label flap design allows for notes to be written, protected, saved, and archived
• Labels have a 2-year shelf life.
* Individual components can be ordered separately
Electrical Characteristics
US/Japan/Europe
Power Supply Input Voltage
Power Supply Output Voltage
Patient Centric Pathology
W O R K F L O W | D I A G N O S T I C S
www.ventanamed.com
© 2008 Ventana Medical Systems, Inc.
BenchMark®, DISCOVERY®, NexES ®, and Ventana are registered
trademarks of Ventana Medical Systems, Inc.
E-Bar™ is a trademark of Ventana Medical Systems, Inc.
N588 0808B
22.8 VDC/1.8A
Current
2.2 Amps
Frequency
50/60 Hz.
Power Connection
Ventana Medical Systems, Inc.
1910 E. Innovation Park Drive
Tucson, Arizona 85755
U.S.A.
+1 (520) 887 2155
(800) 227 2155
100-120/220-240 VAC ±10%
Cord suited to country. For U.S., standard 3-prong grounded.
Physical Characteristics
Size (W x D x H)
7.5” x 12.25” x 7.83” (19.1cm x 31.1cm x 19.9cm)
Weight 6.2 lbs (2.8 kg)
Clearances
Clam shell hood requires 12.25” (31.1cm) to replace ribbon/label.