TECHNICAL APPROVAL SCHEDULE (TAS) JULY 2014 Rev 1
Schedule of design and assessment documents relating to highway structures.
(All documents are taken to include revisions current at date of the TAS).
STANDARD Tick if req’d
Eurocode 0 Basis of Structural Design
BS EN 1990: 2002+A1: 2005 Basis of structural design
NA to BS EN 1990: 2002+A1: 2005 UK National Annex for Eurocode. Basis of structural design
Eurocode 1 Actions on Structures
BS EN 1991-1
BS EN 1991-1-1: 2002
NA to BS EN 1991-1-1: 2002
PD 6688-1-1: 2011
BS EN 1991-1-2: 2002
NA to BS EN 1991-1-2: 2002
PD 6688-1-2: 2007
BS EN 1991-1-3: 2003
NA to BS EN 1991-1-3: 2003
BS EN 1991-1-4: 2005
NA to BS EN 1991-1-4: 2005
PD 6688-1-4: 2009
BS EN 1991-1-5: 2003
NA to BS EN 1991-1-5: 2003
BS EN 1991-1-6: 2005
NA to BS EN 1991-1-6: 2005
BS EN 1991-1-7: 2006
NA to BS EN 1991-1-7: 2006
PD 6688-1-7: 2009
General actions - Densities, self-weight, imposed loads for buildings
UK National Annex to Eurocode 1. Actions on structures. General actions. Densities, selfweight, imposed loads for building
Recommendations for the design of structures to BS EN 1991-1-1
General actions - Actions on structures exposed to fire
UK National Annex to Eurocode 1. Actions on structures. General actions. Actions on structures exposed to fire
Background paper to the UK National Annex to BS EN 1991-1-2
General actions - Snow loads
UK National Annex to Eurocode 1. Actions on structures. General actions. Snow loads
General actions - Wind actions
UK National annex to Eurocode 1. Actions on structures. General actions. Wind actions
Background information to the National Annex to BS EN 1991-1-4 and additional guidance
General actions - Thermal actions
UK National Annex to Eurocode 1. Actions on structures. General actions. Thermal actions
General actions - Actions during execution
UK National Annex to Eurocode 1. Actions on structures. General actions. Actions during execution.
General actions - Accidental actions
National Annex to Eurocode 1. Actions on structures. Accidental actions.
Recommendations for the design of structures to BS EN 1991-1-7
BS EN 1991-2
BS EN 1991-2: 2003
NA to BS EN 1991-2: 2003
Traffic loads on bridges
UK National Annex to Eurocode 1. Actions on

TECHNICAL APPROVAL SCHEDULE (TAS) JULY 2014 Rev 1 structures. Traffic loads on bridges
BS EN 1991-3
BS EN 1991-3: 2006
NA to BS EN 1991-3: 2006
Actions induced by cranes and machines
National Annex to Eurocode 1. Actions on structures. Actions induced by cranes and machinery.
BS EN 1991-4
BS EN 1991-4: 2006
NA to BS EN 1991-4: 2006
Silos and tanks
National Annex to Eurocode 1. Actions on structures. Silos and tanks.
Eurocode 2 Design of concrete structures
BS EN 1992-1
BS EN 1992-1-1: 2004
NA to BS EN 1992-1-1: 2004
BS EN 1992-1-2: 2004
NA to BS EN 1992-1-2: 2004
PD 6687-1: 2010
General rules and rules for buildings
UK National Annex to Eurocode 2. Design of concrete structures. General rules and rules for buildings
General rules. Structural fire design
UK National Annex to Eurocode 2. Design of concrete structures. General rules. Structural fire design.
Background paper to the UK National Annexes to BS EN 1992-1 and BS EN 1992-3
BS EN 1992-2
BS EN 1992-2: 2005
NA to BS EN 1992-2: 2005
PD 6687-2: 2008
Concrete bridges - Design and detailing rules
UK National Annex to Eurocode 2. Design of concrete structures. Concrete bridges.
Design and detailing rules
Recommendations for the design of structures to BS EN 1992-2: 2005
BS EN 1992-3
BS EN 1992-3: 2006
NA to BS EN 1992-3: 2006
PD 6687-1: 2010
Liquid retaining and containing structures
UK National Annex to Eurocode 2. Design of concrete structures. Liquid retaining and containing structures
Background paper to the UK National Annexes to BS EN 1992-1 and BS EN 1992-3
Eurocode 3 Design of steel structures
BS EN 1993-1
BS EN 1993-1-1: 2005
NA to BS EN 1993-1-1: 2005
BS EN 1993-1-2: 2005
NA to BS EN 1993-1-2: 2005
BS EN 1993-1-3: 2006
NA to BS EN 1993-1-3: 2006
General rules and rules for buildings
UK National Annex to Eurocode 3. Design of steel structures. General rules and rules for buildings.
General rules - Structural fire design
UK National Annex to Eurocode 3. Design of steel structures. General rules. Structural fire design
General rules - Supplementary rules for coldformed members and sheeting
UK National Annex to Eurocode 3. Design of

TECHNICAL APPROVAL SCHEDULE (TAS) JULY 2014 Rev 1 steel structures. General rules.
BS EN 1993-1-4: 2006
NA to BS EN 1993-1-4: 2006
BS EN 1993-1-5: 2006
NA to BS EN 1993-1-5: 2006
BS EN 1993-1-6: 2007
BS EN 1993-1-7: 2007
BS EN 1993-1-8: 2005
NA to BS EN 1993-1-8: 2005
BS EN 1993-1-9: 2005
NA to BS EN 1993-1-9: 2005
PD 6695-1-9: 2008
BS EN 1993-1-10: 2005
NA to BS EN 1993-1-10: 2005
PD 6695-1-10: 2009
BS EN 1993-1-11: 2006
NA to BS EN 1993-1-11: 2005
BS EN 1993-1-12: 2007
NA to BS EN 1993-1-12: 2006
Supplementary rules for cold-formed members and sheeting.
General rules - Supplementary rules for stainless steels
UK National Annex to Eurocode 3. Design of steel structures. General rules.
Supplementary rules for stainless steel
Plated structural elements
UK National Annex to Eurocode 3. Design of steel structures. Plated structural elements
General - Strength and stability of shell structures
Plated structures subject to out of plane loading
Design of joints
UK national annex to Eurocode 3. Design of steel structures. Design of joints
Fatigue
UK National Annex to Eurocode 3. Design of steel structures. Fatigue
Recommendations for the design of structures to BS EN 1993-1-9
Material toughness and through-thickness properties
National Annex (informative) to Eurocode 3.
Design of steel structures. Material toughness and through thickness properties
Recommendations for the design of structures to BS EN 1993-1-10
Design of structures with tension components
UK National Annex to Eurocode 3. Design of steel structures. Design of structures with tension components.
Additional rules for the extension of EN 1993 to steel grades S 700
UK National Annex to Eurocode 3. Design of steel structures. Additional rules for the extension of EN 1993 up to steel grades S 700
BS EN 1993-2
BS EN 1993-2: 2006
NA to BS EN 1993-2: 2006
Steel bridges
UK National Annex to Eurocode 3. Design of structures. Steel bridges.
PD 6695-2: 2008 Recommendations for the design of bridges to
BS EN 1993
BS EN 1993-3
BS EN 1993-3-1: 2007
NA to BS EN 1993-3-1: 2006
Towers and masts
UK National Annex to Eurocode 3. Design of steel structures. Towers, masts and chimneys. Towers and masts

TECHNICAL APPROVAL SCHEDULE (TAS) JULY 2014 Rev 1
BS EN 1993-3-2: 2008 Chimneys
BS EN 1993-4
BS EN 1993-4-1: 2007
BS EN 1993-4-2: 2007
BS EN 1993-4-3: 2007
BS EN 1993-5
BS EN 1993-5: 2007
NA to BS EN 1993-5: 2007
Silos
Tanks
Pipelines
Piling
UK National Annex to Eurocode 3. Design of steel structures. Piling
BS EN 1993-6
BS EN 1993-6: 2007
NA to BS EN 1993-6: 2007
Crane supporting structures
UK National Annex to Eurocode 3. Design of steel structures. Crane supporting structures
Eurocode 4 Design of composite steel and concrete structures
BS EN 1994-1
BS EN 1994-1-1: 2004
NA to BS EN 1994-1-1: 2004
BS EN 1994-1-2: 2005+A1:2014
NA to BS EN 1994-1-2: 2005
General rules and rules for buildings
UK National Annex to Eurocode 4. Design of composite steel and concrete structures.
General rules and rules for buildings
General rules - Structural fire design
UK National Annex to Eurocode 4. Design of composite steel and concrete structures.
General rules. Structural fire design
BS EN 1994-2
BS EN 1994-2: 2005
NA to BS EN 1994-2: 2005
PD 6696-2: 2007
General rules and rules for bridges
UK National Annex to Eurocode 4. Design of composite steel and concrete structures.
General rules and rules for bridges
Background paper to BS EN 1994-2 and the
UK National Annex to BS EN 1994-2
Eurocode 5 Design of timber structures
BS EN 1995-1
BS EN 1995-1-1: 2004+A2: 2014 General - Common rules and rules for
NA to BS EN 1995-1-1: 2004+A1:
2008 buildings
UK National Annex to Eurocode 5. Design of timber structures. General. Common rules and rules for buildings
BS EN 1995-1-2: 2004
NA to BS EN 1995-1-2: 2004
General - Structural fire design
UK National Annex to Eurocode 5. Design of timber structures. General. Structural fire design
BS EN 1995-2
BS EN 1995-2: 2004
NA to BS EN 1995-2: 2004
Bridges
UK National Annex to Eurocode 5. Bridges
Eurocode 6 Design of masonry structures
BS EN 1996-1
BS EN 1996-1-1: 2005
NA to BS EN 1996-1-1: 2005
General rules for reinforced and unreinforced masonry structures
UK National Annex to Eurocode 6. Design of

TECHNICAL APPROVAL SCHEDULE (TAS) JULY 2014 Rev 1 masonry structures. General rules for
PD 6697: 2010
BS EN 1996-1-2: 2005
NA to BS EN 1996-1-2: 2005 reinforced and unreinforced masonry structures
Recommendation for the design of masonry structures to BS EN 1996-1-1 and BS EN
1996-2
Structural fire design
UK National Annex to Eurocode 6. Design of masonry structures. Structural fire design
BS EN 1996-2
BS EN 1996-2: 2006
NA to BS EN 1996-2: 2006
PD 6697: 2010
Design considerations, selection of materials and execution of masonry
UK National Annex to Eurocode 6. Design of masonry structures. Design considerations, selection of materials and execution of masonry
Recommendations for the design of masonry structures to BS EN 1996-1-1 and BS EN
1996-2
BS EN 1996-3
BS EN 1996-3: 2006
NA to BS EN 1996-3: 2006
Simplified calculation methods for unreinforced masonry structures
UK National Annex to Eurocode 6. Design of masonry structures. Simplified calculation methods for unreinforced masonry structures
Eurocode 7 Geotechnical design
BS EN 1997-1
BS EN 1997-1: 2004
NA to BS EN 1997-1: 2004
PD 6694-1: 2011
General rules
UK National Annex to Eurocode 7.
Geotechnical design. General rules
Recommendations for the design of structures subject to traffic loading to BS EN 1997-1:
2004
BS EN 1997-2
BS EN 1997-2: 2007
NA to BS EN 1997-2: 2007
Ground investigation and testing
UK National Annex to Eurocode 7.
Geotechnical design. Ground investigation and testing
Eurocode 8: Design of structures for earthquake resistance
Not used
Eurocode 9 Design of aluminium structures
BS EN 1999-1
BS EN 1999-1-1: 2007+A1: 2009 General rules
NA to BS EN 1999-1-1: 2007+A1:
2009
PD 6702-1: 2009
UK National Annex to Eurocode 9. Design of aluminium structures. General rules
Recommendations for the design of aluminium structures
BS EN 1999-1-2: 2007
NA to BS EN 1999-1-2: 2007
General - Structural fire design
UK National Annex to Eurocode 9. Design of

TECHNICAL APPROVAL SCHEDULE (TAS) JULY 2014 Rev 1 aluminium structures. Structural fire design
BS EN 1999-1-3: 2007
NA to BS EN 1999-1-3: 2007
BS EN 1999-1-4: 2007
NA to BS EN 1999-1-4: 2007
BS EN 1999-1-5: 2007
NA to BS EN 1999-1-5: 2007
PD 6703: 2009
Additional rules for structures susceptible to fatigue
UK National Annex to Eurocode 9. Design of aluminium structures. Additional rules for structures susceptible to fatigue
Cold-formed structural sheeting
UK National Annex to Eurocode 9. Design of aluminium structures. Cold-formed structural sheeting
Shell structures
UK National Annex to Eurocode 9. Design of aluminium structures. Shell structures
Guidance on the use of structural bearings
Execution Standards
BS EN 1090-1: 2009
BS EN 1090-2: 2008
PD 6705-2: 2010
BS EN 1090-3: 2008
PD 6705-3: 2009
BS EN 13670: 2009
Non-conflicting British Standards
Execution of steel structures and aluminium structures – Requirements for conformity assessment of structural components
Execution of steel structures and aluminium structures – Technical requirements for the execution of steel structures
Recommendations for the execution of steel bridges to BS EN 1090-2
Execution of steel structures and aluminium structures – Technical requirements for aluminium structures
Structural use of steel and aluminium.
Recommendations for the execution of aluminium structures to BS EN 1090-3
Execution of concrete structures
BS 5930: 1999+A2: 2010
BS 5975: 2008
BS 6031: 2009
BS 6187: 2000
BS 6744: 2001+A2: 2009
BS 6779: Part 4: 1999
BS 8006-1: 2010
BS 8081: 1989
BS 8500-1: 2006
IAN 95/07
Code of practice for Site Investigations
Code of practice for temporary works procedures and the permissible stress design of falsework
Code of practice for Earthworks
Code of practice for demolition
Stainless steel bars for the reinforcement of and use in concrete – requirements and test methods
Specification for parapets of reinforced and unreinforced masonry construction
Code of practice for strengthened/reinforced soils and other fills
Code of practice for ground anchorages
Concrete Complementary British Standard to
BS EN 206-1. Method of specifying and guidance for the specifier
Revised guidance regarding the use of BS

TECHNICAL APPROVAL SCHEDULE (TAS) JULY 2014 Rev 1
8500 (2006) for the design and construction
BS EN 206-1: 2000
BS EN 1317-1: 2010
BS EN 1317-2: 2010
BS EN 1317-3: 2010
DD ENV 1317-4: 2002
BS EN 1337-1: 2000
BS EN 1337-2; 2004
BS EN 1337-3: 2005
BS EN 1337-4: 2004 of structures using concrete
Concrete Specification, performance, production and conformity
Road restraint systems - Terminology and general criteria for test methods
Road restraint systems - Performance classes, impact test acceptance criteria and test methods for safety barriers
Road restraint systems - Performance classes, impact test acceptance criteria and test methods for crash cushions
Road restraint systems - Performance classes, impact test acceptance criteria and test methods for terminals and transitions of safety barriers
Structural bearings – General design rules
Structural bearings - Sliding elements
Structural bearings - Elastomeric bearings
Structural bearings - Roller bearings
BS EN 1337-5: 2005
BS EN 1337-6: 2004
BS EN 1337-7: 2004
BS EN 1337-8: 2007
BS EN 15050: 2007
Structural bearings - Pot bearings
Structural bearings - Rocker bearings
Structural bearings - Spherical and cylindrical
PTFE bearings
Structural bearings Part 8: Guide bearings and restraint bearings
Pre-cast concrete products: bridge elements
Highways Agency Non-conflicting standards and advice notes
The Manual of Contract Documents for Highway Works (MCDHW)
Volume 1 Specification for highway works
Volume 2
Volume 3
Notes for guidance on the specification for highway works
Highway construction details
BA 30/94
BA 35/90
IAN 131/11
IAN 97/07
BA 38/93
The assessment of highway bridges and structures
Expansion joints for use in highway bridge decks
Evaluation of Maintenance Costs in Comparing Alternative
Designs for Highway Structures
Strengthening of concrete highway structures using externally bonded plates
Inspection and repair of concrete highway structures
The deflection of permanent formwork
Assessment and upgrading of existing parapets (supersedes TD
19 (part) BA 37/92 and IAN 72/06)
Assessment of the fatigue life of corroded or damaged
Highways Agency General Standards (GD series)
GD 01/08
GD 02/08
Introduction to the Design Manual for Roads and Bridges
Quality management systems for highway design
Highways Agency Bridges and Structures - Advice Notes (BA Series) and IANs
BA 16/97
BA 26/94
BA 28/92

TECHNICAL APPROVAL SCHEDULE (TAS) JULY 2014 Rev 1 reinforcing bars
BA 39/93
BA 40/93
BA 41/98
BA 43/94
BA 44/96
BA 47/99
BA 50/93
IAN 03/96
BA 51/95
BA 52/94
BA 53/94
BA 54/94
BA 55/06
BA 67/96
BA 68/97
Assessment of reinforced concrete half-joints
Tack welding of reinforcing bars
The Design and Appearance of Bridges
Strengthening, repair and monitoring of post-tensioned concrete bridge decks
The assessment of concrete highway bridges and structures
Waterproofing and Surfacing of Concrete Bridge Decks
Post-tensioned concrete bridges. Planning, organisation and methods for carrying out special inspections
BA 50/93 Post tensioned concrete bridges
The assessment of concrete structures affected by steel corrosion
The assessment of concrete highway structures affected by alkali silica reaction
Bracing systems and the use of U-frames in steel highway bridges
Load testing for bridge assessment
The assessment of bridge substructures and foundations, retaining walls and buried structures
Enclosure of bridges
Crib retaining walls
BA 72/03
BA 80/99
BA 82/00
BA 83/02
Maintenance of road tunnels
Use of rockbolts
Formation of continuity joints in bridge decks
Cathodic protection for use in reinforced concrete highway structures
BA 85/04
BA 86/06
BA 87/04
BA 88/04
BA 92/07
BA 93/09
Coatings for concrete highway structures and ancillary structures
Advice notes on the non-destructive testing of highway structures
Management of corrugated steel buried structures
Management of buried concrete box structures
The Use of Recycled Concrete Aggregates in Structural Concrete
Structural assessment of bridges with deck hinges
Highways Agency Bridges and Structures – Standards (BD Series) and IANs
BD 2/12 Technical Approval of Highway Structures
BD 7/01
BD 10/97
BD 12/01
Weathering steel for highway structures
Design of Highway Structures in Areas of Mining Subsidence
Design of corrugated steel buried structures with spans greater than 0.9 metres and up to 8.0 metres
BD 21/01
BD 27/86
BD 29/04
BD 30/87
BD 33/94
BD 35/06
BD 36/92
The assessment of highway bridges and structures
Materials for the repair of concrete highway structures
Design criteria for footbridges
Backfilled retaining walls and bridge abutments
Expansion joints for use in highway bridge decks
Quality assurance scheme for paints and similar protective coatings
Evaluation of Maintenance Costs in Comparing Alternative
Designs for Highway Structures

TECHNICAL APPROVAL SCHEDULE (TAS) JULY 2014 Rev 1
BD 41/97 Reinforced clay brickwork retaining walls of pocket type and
BD 42/00
BD 43/03
BD 44/95
IAN 04/96
BD 45/93
BD 47/99
IAN 96/07r1
BD 48/93
IAN 91/07
BD 51/14
BD 53/95
BD 54/93
BD 56/10
BD 61/10
BD 62/07
BD 63/07
BD 65/97
BD 67/96
BD 68/97
BD 78/99
BD 79/13
BD 81/02
BD 82/00
BD 84/02
BD 85/08
BD 86/11
BD 87/05
BD 89/03
BD 90/05
BD 91/04
BD 94/07
BD 95/07
BD 97/12
BD 101/11 grouted cavity type construction
Design of embedded retaining walls and bridge abutments
The impregnation of reinforced and prestressed concrete highway structures using hydrophobic pore-lining impregnants
The assessment of concrete highway bridges and structures
BD 44/95 The assessment of concrete highway bridges and structures
Identification marking of highway structures
Waterproofing and Surfacing of Concrete Bridge Decks
Guidance on implementing results of research on bridge deck waterproofing (read in conjunction with BD 96/07r1)
The assessment and strengthening of highway bridge supports
Interim advice on the identification of ‘particularly at risk’ supports
Portal and cantilever signs/signal gantries
Inspection and records for road tunnels
Post-tensioned concrete bridges – prioritisation of special inspections
The assessment of steel highway bridges and structures
The assessment of composite highway bridges
As built, operational and maintenance records for highway structures
Inspection of highway structures
Design criteria for collision protector beams
Enclosures of bridges
Crib retaining walls
Design of road tunnels
The management of sub-standard highway structures
Use of compressive membrane action in bridge decks
Design of buried rigid pipes
Strengthening of concrete bridge supports using fibre reinforced polymers
Strengthening highway structures using externally bonded fibre reinforced polymer
The assessment of highway bridges and structures for the effects of special types general order (STGO) and special order
(SO) vehicles
Maintenance painting of steelwork
The conservation of highway structures
Design of FRP bridges and highway structures
Unreinforced masonry arch bridges
Design of Minor Structures
Treatment of existing structures on highway widening schemes
The assessment of scour and other hydraulic actions at highway structures
Structural review and assessment of highway structures
Highways Agency Bridges and Structures – Technical Memoranda (BE Series)
BE 5/75 Rules for the design and use of freyssinet concrete hinges in highway structures

TECHNICAL APPROVAL SCHEDULE (TAS) JULY 2014 Rev 1
BE 7/04 Departmental Standard (Interim) Motorway Sign/Signal
BE 13
BE 23
Gantries
Fatigue risk in Bailey bridges
Shear key decks
Highways Agency Traffic Engineering and Control – Standards (TD series)
TD 9/93
TD 19/06
IAN 97/07
TD 27/05
TD 36/93
TD 89/08
Highway link design
Requirement for Road Restraint Systems.
Assessment and upgrading of existing parapets
Cross sections and headrooms
Subways for pedestrians and pedal cyclists layout and dimensions
Use of passively safe signposts, lighting columns and traffic signal posts to BS EN 12767
Highways Agency – Advice Notes (HA Series)
HA 59/92
HA 66/95
HA 68/94
IAN 116/08
HA 81/99
HA 84/01
HA 97/01
HA 98/01
Mitigating against effects of badgers
Environmental Barriers: Technical Requirements
Design methods for the reinforcement of highway slopes by reinforced soil and soil nailing techniques
Nature conservation advice in relation to bats (replaces HA
80/99)
Nature conservation advice in relation to otters
Nature conservation and biodiversity
Nature conservation management advice in relation to dormice
Nature conservation management advice in relation to amphibians
Highways Agency Standards (HD Series)
HD 22/08 Managing geotechnical risk
Highways Agency Additional Interim Advice Notes (IAN Series)
IAN 41/02
IAN 47/02
IAN 48/03
IAN 49/13
IAN 53/04
IAN 69/05
IAN 70/06
IAN 104/07
European cement standards
Post tensioned grouted duct concrete bridges
Measures to minimise the risk of sulphate attack (including thaumasite) – new construction and structures under construction
Use of warning signs for new asphalt road surfaces
Concrete half-joint deck structures
Designing for maintenance
Implementation of new reinforcement standards (BS 4449:
2005, BS 4482: 2005, BS 4483: 2005 and BS 8666: 2005)
The anchorage of reinforcement and fixings in hardened concrete
IAN 105/08
IAN 124/11
Implementation of construction (design and management) 2007 and the withdrawal of SD10 and SD11
Implementation of Eurocodes for the design of new and existing highway structures.
IAN 127/10 rev 1 The use of foamed concrete
IAN 138/xx PENDING Site waste management plans
Miscellaneaous
Construction (design and management)

TECHNICAL APPROVAL SCHEDULE (TAS) JULY 2014 Rev 1 regulations 2007
Traffic management act 2004
Department for Transport
Circular Roads No 61/72
CIRIA Report C660
CIRIA Report C580
Highways Agency
Railway Group Standard GC/RT5212
Railway Group Standard GC/RT5112
TRL Report 373
Simplified tables of external loads on buried pipelines (1986)
Routes for heavy and high abnormal loads
Early age thermal crack control in concrete
Embedded retaining walls - guidance for economic design
Non-Proprietary Safety Barrier Systems
(NPSBS)
Requirements for defining and maintaining clearances
Rail traffic loading requirements for the design of railway structures
The use of soil nails for the construction and repair of retaining walls