Torus 50 & 75 :
The perfect solution for applications where low flow and low pressure demands are
critical. Able to operate from pressures as low as 0.5 Bar with flow rates as low as 8
litres/minute.
Ideal for replacing fixed or rotating spray balls, for burst rinsing or prolonged
washing with strong impact. The unique design of the rotating disc of water
provides instant and effective total coverage. Manufactured from FDA approved
materials, and ATEX exempt versions are also available.





Spray Pattern : 180o or 360o
3/8" or 1" BSP, pin fix, weld fix connection
Maximum Cleaning Diameter : 3.2m
Flow Rate : 8 l/min to 65 l/min
Operating Pressure : 0.5 to 4 BAR
Torus 100 :
Larger version of the Torus 50 & 75 where higher flows and pressures are required
or for larger diameter tanks.





Spray Pattern : 180o or 360o
1" pin fix connection
Maximum Cleaning Diameter : 5.2m
Flow Rate : 50 l/min to 120 l/min
Operating Pressure : 1 to 6 BAR
Chemidisc :
Powerful, low cost cleaning, or for burst rinsing. Manufactured from chemical
resistant materials for the pharmaceutical, chemical, nuclear & food industries where
FDA CFR21 compliance & heightened standards of hygiene & performance are
necessary. Can be mounted at any angle.





Spray Pattern : 180o or 360o
1/4", 3/4", 1" & 1-1/2" BSP connection
Maximum Cleaning Diameter : 5m
Flow Rate : 40 l/min to 245 l/min
Operating Pressure : 2 to 4 BAR
Clip-Disc :
The unique rotating disc design gives instant and completely uniform coverage of all
internal surfaces providing a quick, aggressive wash. Ideal for burst rinsing.
Designed for use in ultra hygienic applications where product purity and elimination
of contamination problems is essential. Disc & flow guide made from FDA approved
PVDF material, Shaft made from 316 S/S or Hastelloy.





Spray Pattern : 360o
2 sizes to suit 1" & 1-1/2" OD tube
Maximum Cleaning Diameter : 5m
Flow Rate : 80 l/min to 245 l/min
Operating Pressure : 1 to 4 BAR
Sani-Disc :
Similar to Clip Disc but different materials of construction.
Pure Teflon disc and flow guide make them suitable for use in ultra hygienic
applications where product purity and elimination of contamination problems are
essential. Meet all FDA, USDA & 3A material and design requirements.
Also available with Carbon Filled Teflon disc and flow guide where ATEX exemption is
required.





Spray Pattern : 360o
2 sizes to suit 1" & 1-1/2" OD tube
Maximum Cleaning Diameter : 5m
Flow Rate : 75 l/min to 250 l/min
Operating Pressure : 1 to 4 BAR
Turbodisc (TD) :
A rotating disc which instantly converts the wash fluid into a sphere of fast moving
droplets, giving total surface cover. Are ideal for burst rinsing and can be mounted
at any angle.





Spray Pattern : 180o or 360o
1/4", 3/4". 1", 1-1/2" BSP or Pin Fix
Maximum Cleaning Diameter : 5m
Flow Rate : 45 l/min to 240 l/min
Operating Pressure : 2 to 4 BAR
Sanitor : No Ball Bearings
Ultra sanitary, low flow, variable pressure tank washer.
Ideal for applications where a compact, low flow, high sanitary unit is required.
Having no bearings greatly increases the life and prohibits any contamination issues
associated with bearing degradation. Offers ATEX exemption and FDA approved
materials for a total regulatory compliant package.
Ideally suited to low flow, variable pressure applications where a slow constant
rotation speed is required to give longer chemical dwell times for greater impact and
cleaning efficiency.





Spray Pattern : 360o
3/8" BSP connection, pin fix or weld fix
Maximum Cleaning Diameter : 7.8m
Flow Rate : 25 l/min to 80 l/min
Operating Pressure : 2 to 20 BAR
Turbo SSB : No Ball Bearings
Revolutionary design has no ball bearings. Operates using a hydraulic and PTFE
bearing system giving the unit an increased lifetime, reducing wear and potentially
prohibiting any contamination issues associated with bearing degradation. Ball
bearings wear/degrade and can shed fragments which could find their way into the
product. The absence of ball bearings in the Turbo SSB means there is no danger of
this happening.
A unique pressure regulation system in the drive chamber helps to keep the rotation
speed slow and consistent under differing pressure. This gives the Turbo SSB a
longer dwell time which means it can cut through deposits more effectively.





Spray Pattern : 360o
3/4" BSP connection, pin fix or weld fix
Maximum Cleaning Diameter : 4.4m
Flow Rate : 40 l/min to 100 l/min
Operating Pressure : 2 to 20 BAR
2" Troll Ball :
Simple and effective drive mechanism ensures slow, constant rotation speeds. This
action provides consistent cleaning when using different cleaning fluids across a wide
temperature range. Minimal moving parts provide a very low maintenance, compact
cleaning solution.





Spray Pattern : 180o or 360o
3/4" BSP connection
Maximum Cleaning Diameter : 4.5m
Flow Rate : 50 l/min to 100 l/min
Operating Pressure : 3 to 12 BAR
3" Troll Ball :
Same simple design as 2" troll ball but with greater flow rate and cleaning diameter.





Spray Pattern : 180o or 360o
1-1/2" BSP connection
Maximum Cleaning Diameter : 6.4m
Flow Rate : 110 l/min to 270 l/min
Operating Pressure : 3 to 12 BAR
Monarc :
Perfect, compact jetting tank washer. Gives a fast, powerful, energetic wash which
reduces cleaning time, reduces water, chemical and effluent costs. Typical full cycle
cleaning in 3 - 5 minutes. Compact design means it can be installed in small vessels
such as IBC’s that require a powerful clean.





Spray Pattern : 360o
3/4" BSP connection
Maximum Cleaning Diameter : 6m
Flow Rate : 40 l/min to 110 l/min
Operating Pressure : 4 to 12 BAR
Jumbo 6 :
Uses a simple and effective time proven drive mechanism to ensure low maintenance
with long life. The robust design means the unit can be installed in a wide variety of
vessels that require a fast, powerful cleaning solution. Ideal for replacing large fixed
or rotating spray balls or other jetting units where a powerful impingement clean is
required. Typical full cycle cleaning time 5 - 7 minutes
 Spray Pattern : 360o
 1-1/2" BSP connection
 Maximum Cleaning Diameter : 11m
 Flow Rate : 175 l/min to 570 l/min
 Operating Pressure : 4 to 14 BAR
Fury 400 :
Compact cleaning unit which produces high impact, long range jets which oscillate
through 90 deg while tankwasher continually indexes around the central axis. Only
5% of cleaning liquid is used to drive the operating mechanism so 95% passes
directly to the nozzles producing very high impact jets.
Ideal where rigorous standards of hygiene and product purity are essential.





Spray Pattern : 180o or 360o
1" BSP connection
Maximum Cleaning Diameter : 16m
Flow Rate : 50 l/min to 200 l/min
Operating Pressure : 4 to 12 BAR
Fury 600 :
Larger, more powerful version of the Fury 400 for bigger tanks or where much
greater cleaning impact is needed.
 Spray Pattern : 180o or 360o
 1-1/2" BSP connection
 Maximum Cleaning Diameter : 24.5m
 Flow Rate : 150 l/min to 400 l/min
 Operating Pressure : 2 to 10 BAR
Fury TWB (Tanker Wash Bay) :
Specially designed, robust but lightweight unit producing high power, low flow wash
jets which oscillate through 60 deg while the tank washer continually indexes around
the central axis, safe from damage in the index synchronised protective cage. The
TWB is ideal where high power jets and low flow volumes are essential to minimise
effluent costs and reduce the wash cycle, while giving minimum maintenance costs
and long life.





Spray Pattern : 360o
3/4" BSP connection
Maximum Cleaning Diameter : 16m
Flow Rate : 25 l/min to 100 l/min
Operating Pressure : 5 to 25 BAR
Fury TWB HP (Tanker Wash Bay High Pressure) :
Similar to Fury TWB but designed to operate at pressures up to 90 BAR.

Spray Pattern : 360o




3/4" BSP connection
Maximum Cleaning Diameter : 10m
Flow Rate : 15 l/min to 70 l/min
Operating Pressure : 5 to 90 BAR
Typhoon :
Designed to be one of the most powerful and versatile cleaning units in its class.
The unit is powered by a simple turbine drive, resulting in low maintenance and very
low running costs. The constant, repeatable and validateable action of the unit
provides very powerful, stable jets with high dwell times, maximising chemical
contact time and mechanical energy. Can be fitted with the Veri-Clean Validation
System which confirms that head is operating correctly.





Spray Pattern : 360o
1" BSP connection
Maximum Cleaning Diameter : 18m
Flow Rate : 80 l/min to 220 l/min
Operating Pressure : 2 to 10 BAR
Tempest :
More powerful version of the Typhoon cleaning head with much higher flow rate and
greater impact force. Can be combined with the new Veri-Clean Validation System
which confirms head is operating correctly.





Spray Pattern : 360o
1-1/2" BSP connection
Maximum Cleaning Diameter :19m
Flow Rate : 140 l/min to 380 l/min
Operating Pressure : 2 to 10 BAR
Veri-Clean :
Used with Typhoon or Tempest cleaning heads to detect rotational forces. Ideally
suited to applications where it is required to have an automated signal indicating that
the tank cleaning device is working correctly.


Sensor Type : Magnetic proximity IP68/69K
The signal can be wired into a PLC type control system, a simple signal
indicator or other system.
Retractors :
The units sit externally to the process and extend under the power of the cleaning
fluid to allow the inbuilt cleaning head to clean the appropriate section of the vessel.


Tri clamp connection
Spray Pattern : custom spray pattern depending on cleaning head selected.