Technical Data Sheet
Aron Alpha Type Glass primer
Last Updated April 3, 2009, Printed February 16, 2016
Product Name: Aron Alpha Glass Primer
FEATURES
The primer for bonding glass with Aron Alpha.
PROPERTIES
Property
Appearance
Solvent
Viscosity
Specific Gravity
Flash Point
Glass Primer
Colorless Liquid
Ethanol
1.7 cps
0.83
55.4°F/13.0°C
DIRECIONS
Wipe the bonding surface(s) with a primer-soaked-cloth lightly
one or two times and air dry. Apply adhesive and bond.
**Caution** Too much coating of the primers on the bonding
surface(s) weakens the bonding strength.
PERFORMANCE
Peel Strengths (kgf/inch)
・Glass / Neoprene rubber
Condition
Initial
Out side for a year**
*Material failure
**Test by weatherometer
・Glass / Soft PVC
Condition
Initial
Out side for a year**
*Material failure
**Test by weatherometer
Testing Methods:
With primer
6.3*
4.5*
No primer
5.8*
0
With primer
3.8*
3.3*
No primer
3.5*
0
ISO 8510-2
Handling Precautions
Glass primer contains Ethanol FLAMMABLE and VOLATILE
liquid. Use in a well-ventilated area. Avoid contact with skin. If
swallowed, call a physician. Use a protective mask and gloves if
necessary. In case of eye contact, flush with large amounts of
water and call a physician. Read MSDS before using.
STORAGE
Keep in a dark and cool place.
Disclaimer:
Please be advised that test results are those which were prepare
at Toagosei America’s laboratory. The results may vary under
actual application conditions.
Toagosei America Inc. and KRAZY GLUE CO. Div. of Toagosei America Inc.
1450 West Main St. West Jefferson, OH 43162 Tel:(614)879-9411, Fax:(614)879-6959