JA017019 - Liquid Soap for Dispense

advertisement
Page 1 of 2
Clements Chemicals
SAFETY DATA SHEET
PINK LIQUID HAND SOAP
Revision Date: 05 Aug. 03
Date of Printing: 16 Feb. 16
MSDS Revision: 01
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND COMPANY/UNDERTAKING
Pink Liquid Hand Soap
A942
William Clements (Chemicals) Ltd
The Old Transport Museum
Witham Street
BELFAST BT4 1HP
(028) 9073 8395
Product Name:
Product NO:
Supplier:
Telephone:
2. COMPOSITION/INFORMATION ON INGREDIENTS
3.
Ingredient Name
CAS No
Contents (%)
Health (class)
Risk (R No.)
Sodium Alkyl Ethoxy Sulphate
solution
Amides, coco, N, N-cis
(hydroxyethyl)
68585-34-2 +
96130-61-3
8051-30-7
<20
Xi
36/38
<2
Xi
38, 41
HAZARDS IDENTIFICATION
Provided that this product is handled correctly, it is not classified as hazardous to humans.
4.
FIRST AID MEASURES
Inhalation:
Ingestion:
Skin Contact:
Eye Contact:
5.
Remove from exposure. Keep warm and at rest. Do not induce vomiting. Seek medical attention if you feel unwell.
Wash out mouth with water. Keep warm and at rest. Do not induce vomiting. Seek medical attention if you feel unwell.
Wash the skin with water. Remove contaminated clothing as washing proceeds. Contaminated clothing should be washed or
dry-cleaned before re-use. Seek medical attention if the skin appears damaged or if irritation occurs.
Immediately wash out the eye with plenty of water for at least 15 minutes holding the eye open. Seek medical attention if
symptoms persist.
FIRE-FIGHTING MEASURES
Suitable Extinguishing Media:
Special Fire-Fighting Procedures:
Hazardous Decomposition Products:
6.
Powder, foam, sand, waterspray. Do not use large quantities of water.
Wear full protective clothing and self-contained breathing apparatus.
Fumes containing carbon dioxide, sulphur dioxide, amine vapours oxides of nitrogen and carbon
monoxide may be formed in large fires. May make floor very slippery.
ACCIDENTAL RELEASE MEASURES
Environmental Procedures:
If material enters drains or watercourses, dilute as much as possible and inform authorities immediately.
Spill Cleanup Procedures: Contain and collect spillage. Absorb onto sand. Flush area with plenty of water.
7. HANDLING AND STORAGE
Usage Precautions:
Storage Precautions:
Ventilate well. Keep container closed when not in use. Avoid spilling, skin and eye contact.
Store in plastic, plastic lined or stainless steel, tightly closed containers 5-40ºC. Do not store close to strong
oxidising agents that could aggravate any fire situation.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure standards:
Contains formaldehyde-
UL 8-Hr. TWA
UK 15-minute STEL
2ppm
2ppm
Protective measures:
Respirators:
Protective Gloves:
Eye Protection:
Other Protection:
Not normally required
PVC
Goggles or face shield
Protective overalls and shoes/boots recommended
9. PHYSICAL AND CHEMICAL PROPERTIES
2.5mg/m3
2.5mg/m3
Page 2 of 2
Appearance:
Pink liquid
10. STABILITY AND REACTIVITY
Stability:
Hazardous decomposition products:
Materials to avoid:
Stable under normal conditions but may react with strong oxidants. If the pH falls an exothermic reaction
may occur with Alkyl Ethoxy Alcohol Sulphate solution releasing sulphuric acid.
Combustion may generate oxides of carbon, oxides of nitrogen.
Strong oxidising agents.
11. TOXICOLOGICAL INFORMATION
Health Warnings:
Amides, coco, N, N-cis (hydroxyethyl)- LD50 >2000mg/kg (oral rat)
Sodium Alkyl Ethoxy Sulphate: LD50 >2000mg/kg (oral rat)
12. ECOLOGICAL INFORMATION
Not expected to cause significant environmental impact. Do not release into surface waters.
13. DISPOSAL CONSIDERATIONS
Disposal Methods:
Via an authorized waste disposal contractor to an approved waste disposal site, observing all local and national
regulations.
14. TRANSPORT INFORMATION
NOT REGULATED FOR TRANSPORT
15. REGULATORY INFORMATION
NOT CLASSIFIED AS HAZARDOUS
16. OTHER INFORMATION
Text of the R-phrases that are allocated to the ingredients listed in section 2 of this safety data sheet:
R36/38
Irritating to eyes and skin
R41
Risk of serious damage to eyes
The information given in this safety data sheet is based on knowledge available at the time of completion and is intended to describe the product
only in terms of the health and safety requirements. It does not signify any warranty with regard to specific properties or specifications.
Download