Section XV
BASIC METALS AND PRODUCTS OF BASIC METAL
Group 76
Aluminum and products of aluminum
Note:
1. The terms used in this group have the following meaning:
а) Bars - rolled, pressed, drawn or forged products, not wound into coils and with stable cross section all
along the whole length in the form of circles, ellipses, rectangles (including squares), equiangular triangles or
well-formed convex polygon (including "flattened circles" and "altered rectangles", in which two opposite sides
are convex bows, while the other two are straight, equal in length and parallel to each other). The products with
rectangular (including square), triangular or multangular cross section may have angles, rounded all along the
length of the product. The thickness of such products, with rectangular (including "altered rectangular") cross
section, exceeds 0,1 of their width. Such term is also applied to cast or sintered products of the same forms and
sizes, treated after production (in addition to cutting of edges and removal of scale), provided that during such
treatment they have not acquired the features specific to the products of other commodity items
b) Shapes - rolled, extruded, drawn, forged or formed products, wound or not wound into coils and with
continuous cross section and falling under the definition of bars, wire, plates, sheets, bands or tape, foil, piping
or tubing. This term is also referred to cast or sintered products of the same form, treated after production (apart
from cutting of edges and removal of scale), provided that during such treatment they have not acquired the
features specific to the products of other commodity items.
c) Wire - rolled, extruded or drawn products in coils and with continuous all along the length cross ection in
the form of circles, ellipses, rectangles (including squares), equiangular triangles or well-formed convex polygons
((including "flattened circles" and "altered rectangles", in which two opposite sides are convex bows, while the
other two are straight, equal in length and parallel to each other).
The products with rectangular (including square), triangular or multangular cross section may have angles,
rounded all along the length of the product. The thickness of such products, with rectangular (including "altered
rectangular") cross section, exceeds 0,1 of their width
d) Plates, sheets, bands or tape and foil – flat products (except for not treated products, included in
commodity item 7601), wound or not wound in coils and with continuous rectangular (except for square) cross
section, with rounded or not rounded angles (including "altered rectangles", in which two opposite sides are
convex bows, while the other two are straight, equal in length and parallel to each other), with constant
thickness, with:
- rectangular (including square) form with thickness, not exceeding 0,1 of width;
- form, different from rectangular or square, of any size provided, that they have not acquired specific
features for the products included in other commodity items.
Commodity items 7606 and 7607 include, inter alia, plates, sheets, bands or tape and foil, with uneven
surface (e.g., furrows, bulges, squares, ellipses), as well as products, perforated, corrugated, polished or with
coating, provided, that they have not acquired specific features for the products included in other commodity
items.
e) Pipes and tubes – hollow products, wound or not wound in coils and with constant cross section only
with one closed cavity along the whole length of product in the form of circles, ellipses, rectangles (including
squares), equiangular triangles or well-formed polygons and with constant thickness of wall. The products with
the cross section in the form of rectangle (including square), equiangular triangle or well-formed polygon with
rounded angles all along the length are top be referred to pipes and tubes, provided that their inner and outer
cross sections are concentric and have the same form and orientation. Pipes and tubes, which have the above
described cross sections, may be polished, may have coating, be bended, threaded, drilled, necked down,
expanded, tapered or have flanges, cup type seal or rings on their edges.
Note to sub-items:
1. The terms used in this group have the following meaning:
а) Non alloy aluminum – the metal containing not less than 99 weight fr.% of aluminum, provided, that content in
weight of any other element does not exceed the limits specified in the Table below:
Other elements
Chemical element
Limit content,
weight fr.%
Fe + Si
(iron plus silicium)
1,0
Other elements <1> (for each of them)
0,1 <2>
-------------------------------<1> Other elements are such elements as, chrome, copper, magnesium, manganese, nickeland zinc (Cr,
Cu, Mg, Mn, Ni, Zn).
<2> Copper content is allowed only in quantities over 0,1, but less than 0,2 weight fr.% provided, that
chrome or manganese content at that do not exceed 0,05 weight fr.%.
b) Aluminum alloys are metallic alloys, in which aluminum content in weight exceeds content of any other
element in the alloy, provided that:
i) content in weight, at least, of one of other elements or iron with silicium, taken together, shall exceed the
limit content in weight, specified in the table; or
ii) total content of other elements is more than 1 weight fr.%.
2. Irrespective of the provisions of Note 1c to this group, the term “wire” within sub-item 7616 91 means
only those products, wound or not wound in coils, and with any form of cross section, the size of which does not
exceed 6 mm
Code of nomenclature of goods subject to foreign trade
Commodity Item
Extra unit
of measu
rement
Import customs tariff (in percentage of customs value or in euro)
│7601
│Not-treated aluminum:
│
│
│7601 10 000 0│- unalloyed aluminum
│ - │
10
│(in legal wording of the Regulation of the RF Government dated 30.05.02 N366)
│7601 20
│- aluuminum alloys:
│
│
│7601 20 100 0│- - primary
│ - │
10
│
│- - secondary:
│
│
│7601 20 910 0│- - - in ingots or liquid state
│ - │
10
│7601 20 990 0│- - - other
│ - │
10
│7602 00
│Waste and scrap of aluminum:
│
│
│
│- waste:
│
│
│7602 00 110 0│- - turnings, cuttings, breakage,
│ - │
10
│
│ milling waste,
│
│
│
│ raspings and cuttings; waste of
│
│
│
│ painted, with various coating
│
│
│
│ or bonded sheets and metal paper,
│
│
│
│with thickness not more(without
│
│
│
│ substrate) 0,2 mm
│
│
│7602 00 190 0│- - other (including rejects)
│ - │
10
│7602 00 900 0│- scrappage
│ - │
10
│7603
│Aluminum powder and scales:
│
│
│7603 10 000 0│- unstratified powder
│ - │
10
│7603 20 000 0│- strtified powder; scales
│ - │
10
│7604
│Aluminum bars and shapes:
│
│
│7604 10
│- of unalloyed aluminum:
│
│
│7604 10 100 0│- - bars
│ - │
10
│7604 10 900 0│- - shapes
│ - │
20
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│- of aluminum alloys:
│
│
│7604 21 000 0│- - hollow shapes
│ - │
20
│7604 29
│- - other:
│
│
│7604 29 100 0│- - - bars
│ - │
10
│7604 29 900 0│- - - shapes
│ - │
20
│7605
│Aluminum wire:
│
│
│
│- of unalloyed aluminum:
│
│
│7605 11 000 0│- - with maximum size of cross-section
│ - │
10
│
│ more than 7 mm
│
│
│7605 19 000 0│- - other
│ - │
10
│
│- of aluminum alloys:
│
│
│7605 21 000 0│- - with maximum size of cross-section
│ - │
10
│
│ more than 7 mm
│
│
│7605 29 000 0│- - other
│ - │
10
│7606
│Plates, sheets, strips and tape of
│
│
│
│aluminum with thickness more than 0,2 mm:│
│
│
│- right-angled (including square):
│
│
│7606 11
│- - of unalloyed aluminum:
│
│
│7606 11 100 0│- - - dyed, lacquered or coated with
│ - │
20
│
│
plastics
│
│
│
│- - - other, with thickness:
│
│
│7606 11 910 0│- - - - less than 3 mm
│ - │
20
│7606 11 930 0│- not less than 3 mm, but less than 6 mm │ - │
20
│7606 11 990 0│- - - - not less than 6 mm
│ - │
20
│7606 12
│- - of aluminum alloys:
│
│
│7606 12 100 0│- - - blinds blades
│ - │
20
│
│- - - other:
│
│
│7606 12 500 0│- - - - dyed, lacquered or coated with
│ - │
20
│
│
plastics
│
│
│
│- - - - other, with thickness of:
│
│
│7606 12 910 0│- - - - - less than 3 mm
│ - │
20
│7606 12 930 0│- not less than 3 mm, but less than 6 mm│ - │
20
│7606 12 990 0│- - - - - not less than 6 mm
│ - │
20
│
│- other:
│
│
│7606 91 000 0│- - of unalloyed aluminum
│ - │
20
│(in legal wording of the Regulation of the RF Government dated 30.05.02 N366)
│7606 92 000 0│- - of aluminum alloys
│ - │
20
│7607
│Aluminum foil (without base or on the
│
│
│
│ base of paper, cardboard, plastics or
│
│
│
│similar materials) not more than 0,2 mm │
│
│
│thick (base not included):
│
│
│
│- without base:
│
│
│7607 11
│- - rolled, but without further
│
│
│
│ treatment:
│
│
│7607 11 100 0│- - - less than 0,021 mm thick
│ - │
20
│7607 11 900 0│- - - not less than 0.021 thick, but
│ - │
20
│
│
not more than 0,2 mm
│
│
│7607 19
│- - other:
│
│
│7607 19 100 0│- - - less than 0,021 mm thick
│ - │
20
│
│- - - not less than 0.021, but not more │
│
│
│
than 0,2 mm thick:
│
│
│7607 19 910 0│- - - - self-adhesive
│ - │
20
│7607 19 990 0│- - - - other
│ - │
20
│7607 20
│- with base:
│
│
│7607 20 100 0│- - less than 0,021 mm thick (base
│ - │
20
│
│ not included)
│
│
│
│- - not less than 0,021 (base not
│
│
│
│ included),but more than 0,2 mm thick: │
│
│7607 20 910 0│- - - self-adhesive
│ - │
20
│7607 20 990 0│- - - other
│ - │
20
│7608
│Aluminum pipes and tubes:
│
│
│7608 10
│- of non-alloy aluminum:
│
│
│7608 10 100 0│- - with connected pipe fittings,
│ - │
20
│
│ suitable for supply of gases and
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│ liquids, for civil aviation
│
│
│
│7608 10 900 0│- - other
│ - │
20
│
│7608 20
│- of aluminum alloys:
│
│
│
│7608 20 100 0│- - with connected pipe fittings,
│ - │
20
│
│
│ suitable for supply of gases and
│
│
│
│
│ liquids, for civil aviation
│
│
│
│
│- - other:
│
│
│
│7608 20 300 0│- - - welded
│ - │
20
│
│
│- - - other:
│
│
│
│7608 20 910 0│- - - - without further treatment after │ - │
20
│
│
│
extrusion
│
│
│
│7608 20 990 0│- - - - other
│ - │
20
│
│7609 00 000 0│Fittings for aluminum pipes and tubes
│ - │
10
│
│
│(couplings, elbow fittings, flanges)
│
│
│
│7610
│Aluminum metal structures (except for
│
│
│
│assembled structural units specified in │
│
│
│
│commodity item 9406) and their parts
│
│
│
│
│(bridges, and their sections, towers,
│
│
│
│
│lattice towers, roofing beams,erection
│
│
│
│
│trusses, doors, windows and frames,
│
│
│
│
│threasholds, railing, supports and
│
│
│
│
│ columns); sheets, bars,
│
│
│
│
│shapes, tubes and the like items of
│
│
│
│
│aluminum, designated for use in
│
│
│
│
│metal structures:
│
│
│
│7610 10 000 0│- doors, windows and their frames,
│ - │
20
│
│
│ thresholds дверей
│
│
│
│7610 90
│- other:
│
│
│
│7610 90 100 0│- - bridges and their sections, towers
│ - │
20
│
│
│ and lattice towers
│
│
│
│7610 90 900 0│- - other
│ - │
20
│
│7611 00 000 0│Tanks, cisterns, containers and the like │ - │
10
│
│
│aluminum tanks for any substances
│
│
│
│
│(except for compressed or liquified gas) │
│
│
│
│with capacity more than 300 l, with
│
│
│
│
│ siding or with thermal insulation or
│
│
│
│
│ without such, but without mechanical
│
│
│
│
│ or thermal equipment
│
│
│
│7612
│Barrels, drums, cans, boxes and similar │
│
│
│
│ tanks (including hard or
│
│
│
│
│deformable tubular tanks) made of
│
│
│
│
│aluminum for any substances (except for │
│
│
│
│compressed or liquified gas) with
│
│
│
│
│ capacity not more than 300 l, with
│
│
│
│
│siding or with thermal insulation or
│
│
│
│
│ without such, but without mechanical
│
│
│
│
│ or thermal equipment:
│
│
│
│7612 10 000 0│- other deformable tubular tanks
│ - │
10
│
│7612 90
│- other:
│
│
│
│7612 90 100 │- - hard cylindrical tanks:
│
│
│
│7612 90 100 1│- - - with capacity not more than 1 l
│ - │20, not less than │
│
│
│
│22 euro per 1000 pcs
│(in Rev.Regulation of the RF Gov. dated 06.02.03 N 57 (as ammended on 09.12.03) │
│7612 90 100 9│- - - other
│ - │
10
│
│7612 90 200 0│- - aerosol tanks
│ pcs│
10
│
│
│- - other with capacity of:
│
│
│
│7612 90 910 0│- - - 50 l or more
│ - │
10
│
│7612 90 980 0│- - - less than 50 l
│ - │
10
│
│7613 00 000 0│Aluminum tanks for liquified or
│ - │
10
│
│
│ compressed gases
│
│
│
│7614
│Spun wire, hawsers, braided cords and
│
│
│
│
│the like items of aluminum without
│
│
│
│
│ electrical insulation:
│
│
│
│7614 10 000 0│- with steel core
│ - │
10
│
│7614 90 000 0│- other
│ - │
10
│
│7615
│Canteen products, kitchenware or other
│
│
│
│
│items for domestic needs and their parts │
│
│
│
│made of aluminum; scourers, pads for
│
│
│
│
│ cleaning or polishing,
│
│
│
│
│gloves and the like items of aluminum;
│
│
│
│
│bathroom and lavatory equipment:
│
│
│
│
│- Canteen products, kitchenware or other │
│
│
│
│items for domestic needs and their parts;│
│
│
│
│ made of aluminum; scourers, pads for
│
│
│
│
│ cleaning or polishing,
│
│
│
│
│ gloves and the like items:
│
│
│
│7615 11 000 0│- - scourers, pads for
│ - │10, not less than │
│
│ cleaning or polishing,
│
│ 0,5 euro per 1 kg │
│
│ gloves and the like items
│
│
│
│7615 19
│- - other:
│
│
│
│7615 19 100 0│- - - cast
│ - │ 10, not less than │
│
│
│
│ 0,5 euro per 1 kg│
│7615 19 900 0│- - - other
│ - │ 10, not less than│
│
│
│
│ 0,5 euro per 1 kg│
│7615 20 000 0│- bathroom and lavatory equipment
│ - │
10
│
│
│ and its parts
│
│
│
│7616
│Other items of aluminum:
│
│
│
│7616 10 000 0│- nails, patent fasteners, buckles
│ - │
10
│
│
│(except for the specified in item 8305), │
│
│
│
│ screws, bolts,nuts, screw-in hooks,
│
│
│
│
│ rivets, wedge keys, split pins, washers │
│
│
│
│ and similar products
│
│
│
│
│- other:
│
│
│
│7616 91 000 0│- - metal fabric, grillwork, meshwork
│ - │
10
│
│
│ and fencing made of aluminum wire
│
│
│
│7616 99
│- - other:
│
│
│
│7616 99 100 0│- - - cast
│ - │
10
│
│7616 99 900 0│- - - other
│ - │
10
│
└─────────────┴─────────────────────────────────────────┴────┴───────────────────┘