STAR Distributing
Offers
Back To Nature is a premier manufacturer of unique, safer, marine paint
and varnish removers. They are designed to remove the most difficult,
marine coatings below and above the waterline. All of our marine
strippers are environmentally safe and contain no methylene chloride or
other harsh solvents. They are biodegradable, non-flammable, virtually
odorless, and are easily cleaned up with water. All Back To Nature
Marine Paint removers are safe for fiberglass and gel-coat.
Ready-Strip® Marine changes color to signal removal
time and is specifically designed to remove up to 5 thick
layers of marine anti-fouling, top-side and other paints and
varnishes in one application. It is applied as a blue and
turns light blue when the paint is ready to be removed.
Ready-Strip® Marine will not damage the gel coat or any
surface. Ready-Strip® Marine stays wet for extended
periods of time to penetrate and lift bottom layers, also
making it possible to strip larger areas at one time. It is
environmentally safe, biodegradable, non-flammable, noncombustible and contains no methylene chloride or caustic.
Ready-Strip® Marine is odor-free and can be easily
cleaned up with water. As a paste it clings easily to vertical
surfaces. For application, it can be brushed, rolled or
sprayed. It requires no neutralization (neutral pH).
• Available in: 1 Quart, 1 Gallon, and 5 Gallon Containers.
Aqua-Strip™ is a technically advanced, safer marine
stripper designed to remove 10+ thick layers of marine
anti-fouling, top-side and other paints and varnishes in one
application. Aqua-Strip will not damage the gel coat,
fiberglass or any surface. Aqua-Strip stays wet for extended
periods of time to penetrate and lift bottom layers. It is
environmentally safe, biodegradable, non-flammable, and
contains no methylene chloride or caustic. Aqua-Strip™ is
odor-free and can be easily cleaned up with water. As a
paste it clings easily to vertical surfaces. For application, it
can be brushed, rolled or sprayed. It requires no
neutralization (neutral pH).
• Available in: 1 Quart, 1 Gallon, and 5 Gallon Containers.
Ultra-Strip™, the ultimate safe marine coatings remover is
designed to remove multiple layers of marine anti-fouling,
top-side and other paints and varnishes in one application.
Where speed of removal is critical, a lighter coat of UltraStrip™ will remove 1 layer in as little as 15 minutes and 2
to 4 layers in under 4 hours. For tougher jobs or coatings, a
heavier application will remove the paint in one
application. This product is environmentally safe,
biodegradable, non-flammable, and contain no methylene
chloride or caustic. It is odor-free and can be easily cleaned
up with water. For application, it can be brushed, rolled or
sprayed.It requires no neutralization (neutral pH).
• Available in: 1 Gallon, and 5 Gallon Containers.
After-Strip™ safely and gently removes the residue and
softened layers sometimes remaining after paint or varnish
removal. After-Strip™ helps lift stains from wood. AfterStrip™ cleans and prepares the surface for refinishing.
This environmentally safe solution contains no methylene
chloride or harsh chemicals, is non-flammable, noncombustible, and biodegradable. It works on interior and
exterior surfaces including fiberglass, wood, plaster,
concrete, brick, stone, metal, marble, veneers, etc.
• Available in: 12 ounce spray Containers.
Enter Online Store
Secure 128 Bit Encription Protects
Privacy
Back to
About Star
How to
Show
Links
Home
Distributing
Guides
Schedule