TP Developer’s Content Authoring Tool
PRM10109
Qualification Notes
02 CAT Qualification Layout
PRM10109 Certificate I in Cleaning Operations
Certificate I in Cleaning Operations
Packaging Rules
To achieve recognition at Certificate I level, the candidate for recognition must demonstrate
competency in 3 core units (total of 3 units).
The unit CPCCOHS1001A Work safely in the construction industry is the nationally recognised
unit that underpins the awarding of the ‘white card’ that is mandatory for entering any worksite.
Core units
CPPCLO1040A
CPPCLO1041A
CPCCOHS1001A
Prepare for work in the cleaning industry
Apply basic communication skills
Work safely in the construction industry
PRM20109
Qualification Notes
Certificate II in Cleaning Operations
This qualification is designed to support candidates undertaking pre-vocational programs or
those who are entering the workforce to undertake routine cleaning work under close
supervision.
Packaging Rules
To achieve recognition at Certificate II level, the candidate for recognition must demonstrate
competency in all 3 core units plus 8 elective units (total of 11 units).
Please note that the core contains an alternative OHS units. It is necessary for only one of the
two to be selected. The unit CPCCOHS1001A Work safely in the construction industry is the
nationally recognised unit that underpins the awarding of the ‘white card’ that is mandatory for
entering any worksite.
Of the 8 elective units:
 a minimum of 6 units from the elective units listed below.
 a maximum of two elective units in Certificate II may be selected from any other approved
Training Package as long as it is not the same or similar to those units listed below.
 a maximum of two elective units may be drawn from the Certificate III in Cleaning
Operations.
Core units
CPPCLO2033A
Plan for safe and efficient cleaning activities
CPPCLO2035A
Maintain a cleaning storage area
One of the following two OHS units is to be completed:
CPCCOHS1001A
Work safely in the construction industry
CPPCMN2002A
Participate in workplace safety arrangements
Elective units
CPPCLO2001A
CPPCLO2004A
CPPCLO2009A
CPPCLO2010A
CPPCLO2015A
CPPCLO2017A
CPPCLO2019A
Version 2.0
Maintain a hard floor surface
Maintain a carpeted floor
Clean glass surfaces
Clean ceiling surfaces and fittings
Maintain furniture and fittings and room dressing
Clean a wet area
Sort and remove waste and recyclable materials
Distributed 04/08/09
TP Developer’s Content Authoring Tool
02 CAT Qualification Layout
PRM20109 Certificate II in Cleaning Operations
PRM20109
Certificate II in Cleaning Operations
CPPCLO2037A
CPPCLO2043A
CPPCMN2003A
HLTFA301B
MTMPS201B
MTMPS205B
MTMP2192A
MTMP2196B
MTMP2197B
MTMP2198B
CPPCCL2007A
SITHACS005A
Clean external surfaces
Clean using microfibre techniques
Provide effective service
Apply first aid
Clean work area during operations
Clean chillers
Clean carcase hanging equipment
Overview cleaning program
Clean after operations – boning room
Clean after operations – slaughter floor
Perform basic stain removal
Prepare rooms for guests
Version 2.0
Distributed 04/08/09
TP Developer’s Content Authoring Tool
PRM30109
Qualification Notes
02 CAT Qualification Layout
PRM30109 Certificate III in Cleaning Operations
Certificate III in Cleaning Operations
This qualification is designed to support cleaners working in a broad range of cleaning contexts
requiring specialist and comprehensive skills.
The candidate will typically be working under supervision although this may not be always
provided onsite but can also be provided by the oversight of area supervisors or managers
visiting the site on occasion but providing advice and support by telephone.
Packaging Rules
To achieve recognition at Certificate III level, the candidate must demonstrate competency in all
4 core units plus 15 elective units (total of 19 units).
Of the 15 elective units:
 a minimum of 7 units must be selected from the electives listed below
 a maximum of 6 units not previously completed may drawn from Certificate II in Cleaning
Operations
 a maximum of 3 relevant and previously uncompleted units may be drawn from Certificate III
or Certificate IV qualifications in other sectors of this training package, or from other
approved Training Packages – these units may not be similar to each other or to any other
selected or previously completed unit.
Core units
CPPCLO2033A
CPPCLO2035A
CPPCLO3039A
CPPCMN3003A
Plan for safe and efficient cleaning activities
Maintain a cleaning storage area
Support leadership in the workplace
Contribute to workplace safety arrangements
Elective units
CPPCCL2002A
CPPCCL2003A
CPPCCL2004A
CPPCCL2005A
CPPCLO3002A
CPPCLO3003A
CPPCLO3013A
CPPCLO3014A
CPPCLO3016A
CPPCLO3020A
CPPCLO3021A
CPPCLO3036A
CPPCLO3038A
CPPCLO3044A
CPPCMN3001A
CPPCMN3004A
HLTIN301A
HLTIN403B
TAADEL301C
Version 2.0
Use bonnet cleaning
Use dry foam shampoo
Use dry absorbent compound
Use wet foam shampoo
Restore a hard floor surface
Replace a hard floor finish
Clean window coverings
Maintain a ‘clean room’ environment
Wash furniture and fittings
Clean using pressure washing
Clean industrial machinery
Clean at high levels
Clean a food handling area
Clean using steam sanitising techniques
Participate in environmentally sustainable work practices
Respond to client enquiries and complaints
Comply with infection control policies and procedures in health
work
Implement and monitor infection control policy and procedures
Provide training through instruction and demonstration of work
skills
Distributed 04/08/09
TP Developer’s Content Authoring Tool
CPP41109
Qualification Notes
02 CAT Qualification Layout
CPP41109 Certificate IV in Cleaning Management
Certificate IV in Cleaning Management
This qualification is designed to support candidates who have responsibility as team leaders,
supervisors and as owner managers of their own cleaning and carpet cleaning businesses.
Packaging Rules
To achieve recognition in this qualification the candidate must demonstrate competency in all 8
core units plus 5 elective units (total of 13 units).
Of the five electives the units:
 a maximum of three units may be chosen from the elective list below
 a maximum of five units may be drawn from Qualifications at the Certificate IV level from
the Business Services Training Package (other than those listed in the core or those that
are equivalent to these units)
 a maximum of two units may be drawn from any other endorsed Training Package at
Certificate IV or Diploma level
 a maximum of one unit may be drawn from Certificate III from within the CPP07 Property
Services Training Package.
Core units
CPPCLO4022A
CPPCLO4024A
CPPCLO4025A
CPPCLO4042A
CPPCMN4003A
CPPCMN4004A
CPPCMN4006A
BSBHR402A
Organise and monitor cleaning operations
Control the supply of resources to the work site
Provide quotation for cleaning services
Implement and review risk management process
Manage workplace safety arrangements
Facilitate effective client relationships
Facilitate effective workplace relationships
Recruit and select personnel
Elective units
CPPCMN4001C
CPPCMN4002C
CPPCMN4005A
Version 2.0
Develop workplace policy and procedures for sustainability
Implement and monitor environmentally sustainable work
Facilitate effective teamwork may be included
Distributed 04/08/09