Dear Sir,

advertisement
Dear Sir,
I am an individual that is working to bring a product to market and am in need of some
stickers that would be applied to my product. The following describes what I am after. The
attached file provides a depiction of what I am after and some pictures of the product with
the sticker mock ups in place. I wish to discuss this with you so I can get a better
understanding of technical issues (and your recommendations) and cost prior to placing an
order. If the quantities I specified do not meet required minimums I would like to understand
what the minimums are.
Thank you
Brad Swasand
636-940-9835
1) I need 3 different adhesive stickers (quantities discussed below)
2) Stickers will be outdoors and applied to a powder coated steel surface and need to be of
good quality and resist fading for extended outdoor exposure.
3) I wish the black background of the sticker to closely match the medium gloss of the black
powder coated surface to which they are going to be applied (I’ll need to provide an example
later)
“Patent Pending” sticker is .4 x 1.9 inch (exact size is not critical) . Lettering is Microsoft
“Arial” and Font=18.
Background is black and lettering is light grey. Quantity of 50.
B) “Caution…” sticker is .3 wide x (6.63 to 6.75 inch long). Lettering is Microsoft “Franklin
Gothic Demi Cond” and Font=22.
Background colors are black and yellow and lettering colors are black and yellow. Quantity of
100.
C) LockChock.com sticker with symbol is .9 wide x 6.5 inches long. The larger L and C in
“LockChock” are Microsoft “Franklin Gothic Demi” (please note this is different that the
“Franklin Gothic Demi Cond” used on the other stickers). The “OCK” of the word Lock and the
“HOCK” of the word Chock use Microsoft “Impact” lettering and Font=54. The “.com” is
Microsoft “Impact” lettering and Font=32. Background is black and lettering is light grey
(same as used for patent pending sticker). The symbol is an 8 pointed star (equal height
and width) as can be found in Microsoft “stars and banners” (see powerpoint drawng toolbar)
and the star height is equal to the height of the L and C described previously. A solid black
circle is centered on the star and sized to mimick the example shown. The star is lime green
and the black circle is the same black as used elsewhere to match the powder coat. Quantity
of 100.
Sticker depictions (Not shown actual size)
Download