Final Program
Sunday Dec. 8, 2002
16:00 - 20:00 Registration & Welcome Reception
(Palais Strudlhof)
Monday Dec. 9, 2002
7:30
Registration (at Dec 10-13, Registration will open at 8:00)
8:00
Welcome Addresses:
Conference Chairman, Head of Materials Physics Institute,
Delegate of the Federal Ministry for Education, Science and Culture,
Representatives of the Vienna Business Agency & Vienna Cultural Office
8:20
Opening by the Dean of the Faculty of Natural Sciences and
Mathematics, University of Vienna
SESSION 1: REASONS TO USE NANOSTRUCTURED MATERIALS
(Chair: R.Z.Valiev, RUS)
8:30 – 9:00 Keynote: H. Hahn (D)
I-1.1 Unique Features and Properties of Nanostructured Materials
9:00 – 9:20
0-1.2
R. Grössinger (A), P.Kerschl, R.Sato
Properties, Benefits and Applications of Nanocrystalline Structures in
Magnetic Materials
9:20 – 9:40
0-1.3
H.-J. Fecht (D)
Nanostructure Formation and Properties of Metals and Composites
Processed Mechanically in the Solid State
9:40-10:00 V.E. Panin (RUS), L.S.Derevyagina, A.V.Panin, R.Z.Valiev, V.I.Kopylov
0-1.4 Scale Levels of Plastic Flow and Mechanical Properties of Nanostructured
Materials
10:00-10:30 Coffee Break
SESSION 2: LARGE STRAIN COLD WORKING AND MICROSTRUCTURE
(Chair: J. Embury, CAN)
10:30-11:00 Keynote: H.P. Stüwe (A)
I-2.1 A Comparison of Different Ways to obtain Large Plastic Strains
11:00-11:20
0-2.2
J.Aldazabal, J. Gil Sevillano (ES)
Stage IV: Microscopic or Mesoscopic Effect?
11:20-11.40
0-2.3
S.A. Firstov (UKR)
Deformation Substructure and Mechanical Properties of BCC-Polycrystals
Subjected to Conventional and Severe Plastic Deformation
11:40-12:00
0-2.4
C. Rentenberger (A), H.P. Karnthaler, R.Z. Valiev
Micro- & Nanostructures of Large Strain - SPD Deformed LI2 Intermetallics
1
12:00-14:30 Lunch
SESSION 3: UNIQUE FEATURES OF SPD - MICROSTRUCTURE & PROPERTIES
(Chair: Z. Horita, JAP)
14:30-15:00
I-3.1
Keynote: R.Z. Valiev (RUS)
Paradoxons of Severe Plastic Deformation
15:00-15:20
0-3.2
X. Sauvage (F), A.Guillet, D.Blavette
Investigation of Phase Transformations in Nanostructured Materials
Produced by Severe Plastic Deformation
15:20-15.40
0-3.3
V. Stolyarov (RUS), R.Z.Valiev
Structure-Phase Transformations and Properties in Nanostructured
Metastable Alloys Processed by Severe Plastic Deformation
15:40-16:00 L. Hollang (D), E. Thiele, C. Holste, D. Brunner
0-3.4 The Influence of Temperature And Strain Rate
on the Flow Stress of ECAP Nickel
16:00-16:30 Coffee Break
SESSION 4: MODELLING OF SPD AND OF MECHANICAL PROPERTIES OF
SPD MATERIALS (Chair: M.J. Zehetbauer, A)
16:30-17:00
I-4.1
Keynote: A.E. Romanov (RUS)
Importance of Disclinations in SPD Materials
17:00-17:20
0-4.2
M. Seefeldt (B), P.van Houtte
Disclination-Based Modelling of Grain Fragmentation in Al and Ni
Polycrystals During Cold Torsion and ECAP
17:20-17:40
0-4.3
S.C.Baik, Y. Estrin (D), R.J.Hellmig, H.S.Kim
Modelling of Deformation Behaviour and Texture of ECAP Deformed
Aluminium
17:40-18:00
0-4.4
H.S. Kim (KOR), M.H.Seo, S.I.Hong
Process Modelling of Equal Channel Multi-Angular Pressing
Free Evening To Participants’ Own Disposal
2
Tuesday Dec 10, 2002
SESSION 5: TEXTURE EVOLUTION AND SIMULATION DURING SPD
(Chair: H.P. Stüwe, A)
8:30-9:00
I-5.1
Keynote: L.S. Toth (F)
Texture Evolution and Simulation in SPD Materials
9:00-9:20
0-5.2
E.F. Rauch (F), L.Dupuy
Textural Evolutions for Planar Simple Shear Versus Equal Channel Angular
Extrusion
9:20-9:40
0-5.3
W. Skrotzki (D), B. Klöden, R.Tamm, C.-G. Oertel, L.Wcislak, E. Rybacki
Grain Refinement and Texture Formation During High-Strain Torsion of
NiAl
9:40-10:00
0-5.4
J. Bonarski (PL), I.V.Alexandrov
Severely Plastically Deformed Ti from the Standpoint of Texture Changes
10:00-10:30 Coffee Break
SESSION 6: DETAILS OF SPD NANOSTRUCTURES AS INVESTIGATED BY
ELECTRON MICROSCOPY (Chair: H.P. Karnthaler, A)
10:30-11:00
I-6.1
Keynote: G. Winther (DK), X.Huang
Boundary Characteristics in Nanostructured Materials from SPD
11:00-11:20
0-6.2
J. De Messemaeker (B), B.Verlinden, J.v.Humbeeck, L.Froyen
Quantitative Microstructural Analysis of IF Steel Processed by Equal Channel
Angular Extrusion
11:20-11:40
0-6.3
T. Waitz (A), V.Kazykanov, R.Z.Valiev, H.P.Karnthaler
HRTEM Investigations of Amorphous and Nanocrystalline NiTi Alloys
Processed by HPT
11:40-12:00
0-6.4
K.Kawasaki (JAP), H.Hidaka, T.Tsuchiyama, S.Takaki
Effect of Grain Size on Microstructure Development During Deformation
in Polycrystalline Fe
12:00-14:30 Lunch
SESSION 7: ANALYSES OF SPD MATERIALS BY SELECTED
PHYSICAL METHODS (Chair: I.V. Alexandrov, RUS)
14:30-15:00
I-7.1
Keynote: T. Ungar (H)
X-ray Diffraction Analysis of SPD Materials
15:00-15:20
0-7.2
J.Cizek, I. Prochaska (CZ), G.Brauer, W.Anwand, R.Kuzel, M.Cieslar,
R.K.Islamgaliev
Ultra-Fine Grained Copper Prepared by High Pressure Torsion:
Spatial Distribution of Defects from Positron Annihilation Spectroscopy
15:20-15:40
0-7.3
Z. Trojanova (CZ), P. Lukac, M. Stanek, W.Riehemann
Anelastic Properties of Nanocrystalline Mg
15:40-16:00
0-7.4
K. Pekala, M. Pekala (PL)
Electron Transport Study of Nanocrystallizing Alloys
3
16:00-18:00
COFFEE & POSTER SHOW I (POSTERS OF SESSIONS 1-7)
(Chair & Introduction: R. Pippan, A)
19:00
Social Evening Event: Vienna “Heurigen – The Wine of the Year”, in Grinzing
(for all participants and accompanying persons)
Wednesday, Dec 11, 2002
SESSION 8: INFLUENCE OF DEFORMATION PARAMETERS TO
SPD NANOSTRUCTURES (Chair: S.Dobatkin, RUS)
8:30-9:00
I-8.1
Keynote: M.J. Zehetbauer (A), H.P. Stüwe, A.Vorhauer, E.Schafler, J. Kohout
The Role of Hydrostatic Pressure in Severe Plastic Deformation
9:00-9:20
0-8.2
T. Hebesberger (A), R.Pippan, H.P.Stüwe
Influence of the Processing Parameters at High Pressure Torsion
9:20-9:40
0-8.3
Yu. Ivanisenko (D), A.Sergueeva, R.Valiev, H.-J. Fecht
Mechanical Properties and Thermostability of the Nanostructured Armco
Iron Produced by High Pressure Torsion
9:40-10:00
0-8.4
M. Furukawa (JAP), H.Akamatsu, Z.Horita, T.G.Langdon
Properties of Aluminium Alloys after Processing Using a 60 degrees Die
10:00-10:30 Coffee Break
SESSION 9: NEW METHODS OF SPD
(Chair: N. Hansen, DK)
10:30-11:00
I-9.1
Keynote: N. Tsuji (JAP)
ARB-Accumulated Roll Bonding and Other New Techniques of SPD
11:00-11:20
0-9.2
J. Alkorta (ES), J. Gil Sevillano
Optimal SPD Processing of Plates by Constrained Groove Pressing
11:20-11:40
0-9.3
C.P. Heason (GB), P.J.Apps, P.S.Bate, P.B.Prangnell
Comparative Study and Modelling of Accumulative Roll Bonding (ARB)
Processed AA8079 And AA1100
11:40-12:00
M.Umemoto, Y.Todaka (JAP), K. Tsuchiya
Nanocrystallization in Carbon Steels by Various SPD Processes
0-9.4
12:00-14:30 Lunch
15:00
General Conference Excursion:
Type A: Schloss Schönbrunn – The Emperor’s Summer Residence
Type B: Schönbrunn Tiergarten – The World’s Oldest Live Animal Show
18:00
Common Meeting at Open Air Evening with Christmas Punsch
at Romantic Christmas Market of the Castle of Schönbrunn
4
Thursday Dec 12, 2002
SESSION 10: SPD WITH BALL MILLING AND POWDER CONSOLIDATION
(Chair: H. Gleiter, D)
8:30-9:00
I-10.1
Keynote: E. Gaffet (F)
Bulk Nanostructured Materials from Mechanical Milling
and Consolidation Processings
9:00-9:20
0-10.2
C. Langlois (F), M.J.Hytch, P.Langlois, Y.Champion
Characterisation and Mechanical Properties of Nanostructured Copper
Obtained by Powder Metallurgy
9:20-9:40
0-10.3
H.J. Roven (NOR), I. Johansen
Microstructure and Properties of Severe Plastically Deformed Granular
Aluminium Alloys
9:40-10:00
0-10.4
R.Ye. Lapovok (AUS), P.F. Thomson, E. Williams
Densification of Magnesium Particles by ECAP with Back-Pressure
10:00-10:30 Coffee Break
SESSION 11: MECHANICAL PROPERTIES AND THERMOSTABILITY OF
NANOCRYSTALLINE STRUCTURES (Chair: J. Weertman, USA)
10:30-11:00
I-11.1
Keynote: H. Van Swygenhoven (CH), P.M. Derlet, A. Hasnaoui
Atomistic Modelling of Strength of Nanocrystalline Materials
11:00-11:20
0-11.2
I.V.Alexandrov (RUS)
Multiscale Studies and Modelling of SPD Materials
11:20-11:40
0-11.3
D.H. Shin (KOR), K.-T. Park
Microstructural Stability and Tensile Properties of Nanostructured Low Carbon
Steels Processed by Equal Channel Angular Pressing
11:40-12:00
0-11.4
M.A.Munoz-Morris, C.Garcia Oca, G.Gonzales Doncel, D.G.Morris (ES)
Microstructure of Severely Deformed Al-Mg and Its Evolution
During Subsequent Annealing Treatments
12:00-12:20
0-11.5
L. Hollang (D), E. Thiele, C. Holste, D. Brunner
On the Influence of Temperature and Strain Rate on the Flow Stress
of ECAP Nickel
12:20-14:30 Lunch
5
SESSION 12: INFLUENCE OF DEFORMATION PATH TO PROPERTIES OF
SPD MATERIALS (Chair: H. Mughrabi, D)
14:30-15:00
I-12.1
Keynote: V. Vinogradov (JAP), S. Hashimoto
Fatigue of SPD Materials
15:00-15:20
0-12.2
H.W. Höppel (D), M.Kautz, N.Barta-Schreiber, H.Mughrabi, R.Z.Valiev
Cyclic Deformation Behaviour and Possibilities to Enhance the Fatigue
Properties of Ultrafine-Grained Metals
15:20-15:40
0-12.3
A.Vorhauer (A), R.Pippan
The Influence of Type and Path of Deformation on the Evolution of Severe
Plastic Deformation Microstructures
15:40-16:00
0-12.4
G.A. Salishchev (RUS), S.V.Zherebtsov
Formation of Submicrocrystalline Structure in Titanium During Successive
Uniaxial Compression in Three Orthogonal Directions
16:00-18:00
COFFEE & POSTER SHOW II (POSTERS OF SESSIONS 8 – 15)
(Chair & Introduction: E.Aernoudt, B)
19:00
Vienna Ringstraße Sight Seeing Tour
20:00
Festive Dinner in Original Old Vienna Style, at Palais Pallavicini
6
Friday, Dec. 13, 2002
SESSION 13: FEATURES AND MECHANISMS OF SUPERPLASTICITY IN
SPD MATERIALS (Chair: P. Lukac, CZ)
8:30-9:00
I-13.1
Keynote: C.Xu, M.Furukawa, Z.Horita, T.G. Langdon (USA)
Achieving a Superplastic Forming Capability
Through Severe Plastic Deformation
9:00-9:20
0-13.2
Z. Horita (JAP), K.Matsubara, T.G.Langdon
Production of Superplastic Mg Alloys Using Severe Plastic Deformation
9:20-9:40
0-13.3
M.M. Myshlyaev (RUS), M.M.Kamalov, M.M.Myshlyaeva
High Strain Rate Superplasticity in An Micrometer-Grained Al-Li Alloy
Produced by Equal-Channel Angular Extrusion
9:40-10:00
0-13.4
Y.R. Kolobov (RUS)
Diffusion Controlled Processes and Plasticity / Superplasticity of
Nanostructured Materials Processed by Severe Plastic Deformation
10:00-10:30 Coffee Break
SESSION 14: MECHANISMS OF DIFFUSION RELATED PROCESSES IN
NANOCRYSTALLINE MATERIALS (Chair: H.E. Schaefer, D)
10:30-11:00
I-14.1
Keynote: R. Würschum (A)
Diffusion in Nanocrystalline Materials
11:00-11:20
0-14.2
W. Sprengel (D), V.Barbe, S.Herth, O.Gutfleisch, R.Würschum, H.-E.Schaefer
Interface Structure and Self-Diffusion in Ultrafine Grained Pr2Fe14B and
Nd2Fe14B Hardmagnets
11:20-11:40
0-14.3
V.N. Perevezentsev (RUS)
Theoretical Investigation of Non-Equilibrium Grain Boundary Diffusion
Properties
11:40-12:00
0-14.4
T. Sakai (JAP), H.Miura, A.Belyakov, K.Tsuzaki
On Annealing Mechanisms Operating in Ultra Fine-Grained Alloys
12:00-14:30 Lunch
7
SESSION 15: APPLICATION OF SPD MATERIALS
(Chair: D.H. Shin)
14:30-15:00
I-15.1
Keynote: T.C. Lowe, R.Asarov (USA), Y. Zhu
Commercialization of Nanostructured Metals
Produced by Severe Plastic Deformation
15:00-15:20
0-15.2
V.A. Fokine (RUS)
The Main Directions in Applied Research and Developments
of SPD Nanomaterials in Russia
15:20-15:40
0-15.3
S.V. Dobatkin (RUS), P.D.Odessky, R.Pippan, G.I.Raab, N.A.Krasilnikov,
A.M.Arsenkin
Developing of Structure and Properties in Low-Carbon Steels During
Warm and Hot Equal Channel Angular Pressing
15:40-16:00
0-15.4
L. Zeipper (A), M.Zehetbauer, E.Schafler, B.Mingler, G.Korb
Mechanical Properties of Nano-SPD Titanium MaterialsExperiments and Constitutive Concepts
16:00-16:30 Coffee Break
16:30-18:00
FINAL CONFERENCE DISCUSSION
(Chairs: M.J.Zehetbauer & R.Z.Valiev)
18:00
Closing Ceremony
19:30 Symphony Concert at the Wiener Konzerthaus, Large Hall
(not included in registration fee)
Radio Symphony Orchestra Vienna, conducted by Simone YOUNG
Zoltan KOCSIS, Piano Solo
(B. Bartok: Piano Concert No.3, Sz 119; A. Bruckner: Symphony No.6, A-major)
8
Poster Show I: POSTERS OF SESSIONS
1–7
Chair and Introduction: R. Pippan, A
POSTERS / SESSION 1: REASONS TO USE NANOSTRUCTURED MATERIALS
P-1.5
M. Suszynska (PL), I. Krajczyk, B. Macalik
Hydrogen-Induced Formation of Silver and Copper Nanoparticles in Soda Lime
Silicate Glasses
POSTERS / SESSION 2: LARGE STRAIN COLD WORKING AND
MICROSTRUCTURE
P-2.5
N.Q. Chinh (H), Z. Horita, T.G. Langdon
The Nature of the Stress-Strain Relationship in Aluminium and Copper over a
Wide Range of Strain
P-2.6
K. Han (USA), Y. Xin, A. Ishmaku
Strain Hardening by Formation of Nanoplatelets
P-2.7
R. Krummreich-Brangier (F), M. Berveiller, H. Sabar
Modelling the Draw Hardening of a Pearlitic Lamellar Nanocomposite:
A Multi-Scale Transition Method
POSTERS / SESSION 3: UNIQUE FEATURES OF SPD –
MICROSTRUCTURE & PROPERTIES
P-3.5
P.J. Apps (GB), C.P. Heason, P.B. Prangnell
The Effect of Second Phase Particles on the Deformation of Aluminium Alloys
during Equal Channel Angular Extrusion
P-3.6
P. Bassani, L. Tasca, M. Vedani (I)
Effects of ECAP Processing on Aging Behaviour of 6082 Al-Alloys
P-3.7
V. Bengus (UKR), S. Smirnov
Contribution of the Thermal Anisotropy Internal Stresses to Yield Stress
Anisotropy of Nanostructured Ti and its Increased Plasticity at 77 K
P-3.8
S.V. Dobatkin, V.V. Zakharov, R.Z. Valiev, A. Yu. Vinogradov, T.D. Rostova, N.A.
Krasilnikov, E.N. Bastarash, I.B. Trubitsyna (RUS)
Nano- and Submicrocrystalline Structure Formation during High Pressure
Torsion of Al-Sc and Al-Mg-Sc Alloys
P-3.9
D.V. Gunderov (RUS), A.G. Popov, V.V. Stolyarov, N.N. Shchegoleva, A.R. Yavari
Crystallisation in Initial-Amorphous Nd2Fe14B Alloy during Severe Plastic
Deformation
P-3.10
I.Yu. Khmelevskaya, I.B. Trubitsyna, S.D. Prokoshkin (RUS), S.V. Dobatkin,
V.V.Stolyarov, E.A.Prokofjev
Structure and Functional Properties of Ti-Ni-Based Shape Memory Alloys
Subjected to Severe Plastic Deformation and Heat Treatment
P-3.11
V.P. Kisel (RUS)
Universal Mechanisms of Dislocation Motion and Multiplication in Single and
Nanostructured Crystals
9
P-3.12
G. Korznikova (RUS), A. Korneva, A. Korznikov
Formation of Submicrocrystalline Structure in the Hard Magnetic Alloy
Fe-15wt%Co-25%Cr During Straining by Complex Loading
P-3.13
G. Krallics (H), Z. Szeles, I.P. Semenova, T.V. Dotsenko, I.V. Alexandrov
Experimental Investigations of the alloy Al-Mg-Si-Alloy subjected to
Equal-Channel Angular Pressing
P-3.14
K. Mathis (CZ), Z. Trojanova, P. Lukac
Mechanical Properties of AZ91 Alloy after Equal Channel Angular Pressing
P-3.15
Z. Pakiela (PL)
Influence of Heterogeneity of Microstructure on the Mechanical Properties of
Nanocrystalline Materials Processed by Severe Plastic Deformation
P-3.16
V. Sklenicka (CZ), J. Dvorak
Creep Behaviour of Pure Aluminium Processed by Equal-Channel Angular
Pressing
P-3.17
M. Sus-Ryszkowska (PL), Z. Pakiela, R.Z. Valiev, J.W. Wyrzykowski,
K.J. Kurzydlowski
Mechanical Properties of Nanostructured Iron obtained by Different Methods of
Severe Plastic Deformation
P-3.18
E.D. Tabachnikova (UKR), V.D. Natsik, A.V. Podolskiy, S.N. Smirnov, R.Z.
Valiev, V.V. Stolyarov, I.V. Alexandrov
Low Temperature Deformation and Failure of Some Nanostructured Metals
POSTERS / SESSION 4: MODELLING OF SPD AND OF MECHANICAL
PROPERTIES OF SPD MATERIALS
P-4.5
N.A. Enikeev (RUS), H.S. Kim, I.V. Alexandrov, S.I. Hong
Deformation Behaviour of ECAP Cu as Described by a Dislocation Model
P-4.6
P.A. Gonzalez (ES), C.J. Luis
Severe Plastic Deformation by ECAP in an Al-Mg-Mn Commercial Alloy
P-4.7
R.J. Hellmig (D), S.C. Baik, J.R. Bowen, Y. Estrin, D.J. Jensen, H.S. Kim,
M.H. Seo
Evolution of Mechanical and Microstructural Properties of ECAP Deformed
Copper
P-4.8
E.V. Kozlov (RUS), A.N. Zhdanov, N.A. Popova, N.A. Koneva
An Integrated Model of Strengthening of UFG Materials
P-4.9
G. Krallics, I.N. Budilov, I.V. Alexandrov, G.I. Raab, V.S. Zhernakov (RUS)
Computer Simulation of the ECAP of W by means of the FEM method
10
POSTERS / SESSION 5: TEXTURE EVOLUTION AND SIMULATION DURING SPD
P-5.5
J. Bonarski, I.V. Alexandrov, L. Tarkowski (PL)
Heterogeneity of Microstructure and Crystallographic Texture in Cu and Ti,
Subjected to Equal-Channel Angular Pressing
POSTERS / SESSION 6: DETAILS OF SPD NANOSTRUCTURES AS INVESTIGATED
BY ELECTRON MICROSCOPY
P-6.5
V.U. Kazykhanov, T. Waitz, H. P. Karnthaler (A), R.Z. Valiev
Microstructure and Phase Transformations of HPT NiTi
P-6.6
N.A. Koneva (RUS), A.N. Zhdanov, N.A. Popova, L.N. Ignatenko, E.E. Pekarskaya,
E.V. Kozlov
Types of Grains and Boundaries, Joint Disclinations and Dislocation Structure of
UFG Materials
P-6.7
T. Koyama (JAP), H. Miyamoto, S. Hashimoto, A. Vinogradov, T. Mimaki
Microstructure and Development of Single Crystal Deformed by Equal Channel
Angular Pressing
P-6.8
B. Mingler (A), L. Zeipper, H.P. Karnthaler
TEM-Investigations of Titanium Deformed by Equal Channel Angular Pressing
P-6.9
H. Miura (JAP), H. Hamaji, T. Sakai
Microstructural Evolution During Severe Deformation in Austenitic Stainless
Steel with Second Phase Particles
P-6.10
A.N. Tyumentsev (RUS), A.D. Korotaev, Yu.P. Pinzhin, I.A. Ditenberg, I.Yu.
Litovchenko, N.S. Surikova, R.Z. Valiev
Structural Models and Mechanisms for the Formation of High-Energy
Nanostructures under Severe Plastic Deformation
P-6.11
A.P. Zhilyaev, G.V. Nurislamova (RUS), Bae-Kyun Kim, M. D. Baró,
J.A. Szpunar, T.G. Langdon
Grain Refinement And Microstructural Evolution in Nickel
During High–Pressure Torsion
POSTERS / SESSION 7: ANALYSES OF SPD MATERIALS BY SELECTED
PHYSICAL METHODS
P-7.5
J. Gubicza (H), D. Fátay, K. Nyilas, S. Dobatkin, T. Ungár
X-Ray Peak Profile Analysis on the Microstructure of Al-5.9%Mg-0.3%Sc0.18%Zr Deformed by High Pressure Torsion
P-7.6
E. Schafler (A), L. Zeipper, M.Zehetbauer
X-Ray Bragg Profile Analysis of Severely Plastically Deformed Titanium
11
Poster Show II:
POSTERS OF SESSIONS 8 - 15
Chair and Introduction: E. Aernoudt, B
POSTERS / SESSION 8: INFLUENCE OF DEFORMATION PARAMETERS
TO SPD NANOSTRUCTURES
P-8.5
A.A. Dubravina (RUS), I.V. Alexandrov, A.V. Sergueeva
Deformation Behaviour of Copper Subjected to High Pressure Torsion
P-8.6
G. Raab (RUS), E. Soshnikova, X. Salimgareev
Features of ECAP of Hard-To-Deform Metals
POSTERS / SESSION 9: NEW METHODS OF SPD
P-9.5
Y. Beygelzimer, D. Orlov, V. Varyukhin (UKR)
SPD by Twist Extrusion
P-9.6
K. Higashida (JAP), T. Morikawa
SPD Structures Associated with Shear Bands in Cold-Rolled Low SFE Metals
P-9.7
V.V. Latysh (RUS), V.S. Zhernakov, V.A. Shundalov, R.Z. Valiev
Producing Bulk Nanostructured Alloys using a Combination of SPD Techniques
P-9.8
M.M. Myshlyaev, S.Yu. Mironov (RUS)
Features of Mechanical Behaviour and Evolution Structure of
Submicrocristalline Titanium under Cold Deformation
P-9.9
A.C.C. Reis (B), I. Tolleneer, L. Barbé, L. Kestens
Ultra Grain Refinement of Fe-Based Alloys by Accumulated Roll Bonding
P-9.10
M.Umemoto, Y.Todaka (JAP), K. Tsuchiya
Nanocrystallization in Carbon Steels by Various SPD Processes
POSTERS / SESSION 10: SPD WITH BALL MILLING AND
POWDER CONSOLIDATION
P-10.5
A. Belyakov (JAP), Y. Sakai, T. Hara, Y. Kimura, K. Tsuzaki
Annealed Microstructures in Mechanically Milled Fe-0.6%O Powders
P-10.6
S. Billards (F), G. Dirras, J.P. Fondere, B. Bacroix
Processing and Characterization of Nanocrystalline Material Obtained by Hot
Isostatic Pressing
P-10.7
H. Hidaka (JAP), K. Kawasaki, T. Tsuchiyama, S. Takaki
Effect of Oxide Particles on Thermal Stability of Ultra Fine-Grained Structure in
Mechanically Milled Iron
P-10.8
H. Inomoto (JAP), H. Fujiwara, K. Ameyama
Characteristics of Nano Grain Structure in SPD-PM Processed AISI304L
Stainless Steel Powder
P-10.9
S.D. Kaloshkin, V.V. Tcherdyntsev (RUS), G. Principi, A.I. Laptev, E.V.Shelekov
Formation of Powder and Bulk Al-Cu-Fe Quasicrystals, and of Related Phases
During Mechanical Alloying and Sintering
12
P-10.10
M. Rombouts (BE), L.Froyen
Production and Consolidation of Nanocrystalline Fe Based Alloy Powders
P-10.11
J.C. Werenskiold (NOR), H.J. Roven
Properties of Granular Aluminium AA6082 Subjected to SPD by ECAP
POSTERS / SESSION 11: MECHANICAL PROPERTIES AND THERMOSTABILITY
OF NANOCRYSTALLINE STRUCTURES
P-11.6
J. Cizek (CZ), I. Procházka, R. Kuzel, M. Cieslar, R.K. Islamgaliev
Dependence of Thermal Stability of Ultra Fine Grained Metals on Grain Size
P-11.7
A. Betzwar-Kotas, V. Gröger (A), G. Khatibi, B. Weiss, I. Wottle, P. Zimprich
Thermomechanical Properties of Electrodeposited, Ultrafine Grained Cu Foils
for Printed Wiring Boards
P-11.8
F. Dalla Torre, H. Van Swygenhoven, M. Victoria (CH), Z. Budrovic, R.Z. Valiev
Comparison of Microstructure and Tensile Properties of Nanocrystalline Ni
Synthesized by HPT and ED
P-11.9
B.B. Straumal (RUS)
Deformation of Nanocrystalline Materials
and Grain Boundary Phase Transitions
P-11.10
Vorhauer, W. Knabl, R. Pippan (A)
Microstructure and Thermal Stability of Tungsten Based Materials after
Severe Plastic Deformation
P-11.11
R. Wadsack, R. Pippan, F. Wetscher (A)
Development of Microstructure and Thermal Stability of
Nanostructured Chromium Processed by Severe Plastic Deformation
POSTERS / SESSION 12: INFLUENCE OF DEFORMATION PATH TO PROPERTIES
OF SPD MATERIALS
P-12.5
L. Kommel (EST), K. Kenk, R. Veinthal
Viscoplastic Behaviour of SPD Copper
POSTERS / SESSION 13: FEATURES AND MECHANISMS OF SUPERPLASTICITY
IN SPD MATERIALS
P-13.5
S.I. Hong (KOR), H.J. Kwon, H.S. Kim
Superplastic Behaviour of Deformation Processed Cu-Ag Nanocomposites
P-13.6
M.M. Myshlyaev, A.A. Mazilkin (RUS), M.M. Kamalov
Features of Microstructure and Phase State in an Al-Li Alloy after ECA Pressing
and High Strain Rate Superplastic Flow
P-13.7
A. Mussi (F), J.-J. Blandin, E. Rauch
Microstructure Refinement and Improvement of Mechanical Properties of a
Magnesium Alloy by Severe Plastic Deformation
P-13.8
K. Neishi (JAP), Z. Horita, T.G. Langdon
Grain Refinement and Superplastic Properties of Cu-Zn Alloys Processed by ECAP
13
P-13.9
N.K. Tsenev (RUS), N.F. Yunusova, R.K. Islamgaliev, A.M. Shammazov
The Influence of Precipitates on the Enhanced Superplasticity of UltrafineGrained Aluminium Alloys
POSTERS / SESSION 15: APPLICATION OF SPD MATERIALS
P-15.5
A.A. Popov (RUS)
Ways to Improve Strength of Titanium Alloys by Means of Intense Plastic
Deformation
P-15.6
V.G. Pushin (RUS)
Nanocrystalline Shape Memory TiNi-Based Alloys Produced by SPD and
Superrapid Solidification from Melt: Structures, Properties and Application
P-15.7
I.A. Ryzhikov (RUS), A.L. Rakhmanov
The Technology of Nanostructured Functional and Intelligence Materials
P-15.8
J. Wang (CHI), C. Xu, Yu. Wang, X. Zhao, Z. Du, Z. Zhang, T.G. Langdon
Microstructure and Properties of a Low Carbon Steel after Equal-Channel
Angular Pressing
P-15.9
S.V. Zherebtsov (RUS), G.A. Salishchev, R.M. Galeyev, O.R. Valakhmetov,
S.L. Semiatin
Formation of Submicrocrystalline Structure under Warm Severe Plastic
Deformation in Ti-6Al-4V Large-Scale Billets
14