Preliminary Program (Status Aug. 6, 2002)
Sunday Dec. 8, 2002
16:00
Registration
18:00
Welcome Party (Hotel Boltzmann or Palais Strudlhof)
Monday Dec. 9, 2002
7:30
Registration (at Dec 10-13, Registration will open at 8:00)
8:00
Opening Addresses (Chairman, Head of Institute)
SESSION 1: REASONS TO USE NANOSTRUCTURED MATERIALS
(Chair: R.Z.Valiev, RUS)
8:30 - 9:00
Keynote: H. Gleiter (D)
Unique Features and Properties of Nanostructured Materials
9:00 - 9:20
R. Grössinger (A), P.Kerschl, R.Sato
Properties, Benefits and Applications of Nanocrystalline Structures in
Magnetic Materials
9:20 - 9:40
H.-J. Fecht (D)
Nanostructure Formation and Properties of Metals and Composites Processed
Mechanically in the Solid State
9:40-10:00
V.E. Panin (RUS), L.S.Derevyagina, A.V.Panin, R.S.Valiev, V.I.Kopylov
Scale Levels of Plastic Flow and Mechanical Properties of Nanostructured
Materials
10:00-10:30 Coffee Break
SESSION 2: LARGE STRAIN COLD WORKING AND MICROSTRUCTURE
(Chair: J. Embury, CAN)
10:30-11:00
Keynote: H.P. Stüwe (A)
Work Hardening at Large Strains of Metals: A Historical Overview
11:00-11:20
J.Aldazabal, J. Gil Sevillano (ES)
Stage IV: Microscopic or Mesoscopic Effect?
11:20-11:40
V.V. Rybin (RUS)
Mesomechanisms of Nano- and Submicrostructures Formation in the Course
of the Large Plastic Strains
11:40-12.00
S.A. Firstov (UKR)
Deformation Substructure and Mechanical Properties of BCC-Polycrystals
Subjected to Conventional and Severe Plastic Deformation
12:00-14:30 Lunch
1
SESSION 3: UNIQUE FEATURES OF SPD - MICROSTRUCTURE & PROPERTIES
(Chair: Z. Horita, JAP)
14:30-15:00
Keynote: R.Z. Valiev (RUS)
Paradoxons of Severe Plastic Deformation
15:00-15:20
X. Sauvage (F), A.Guillet, D.Blavette
Investigation of Phase Transformations in Nanostructured Materials
Produced by Severe Plastic Deformation
15:20-15:40
A. M. Glezer (RUS), E.N.Blinova, V.A.Zhorin
Severe Plastic Deformation and Martensite Transformation in Iron-Nickel
Alloys
15:40-16.00
V. Stolyarov (RUS), R.Valiev
Structure-Phase Transformations and Properties in Nanostructured
Metastable Alloys Processed by Severe Plastic Deformation
16:00-16:30 Coffee Break
SESSION 4: MODELLING OF SPD AND OF MECHANICAL PROPERTIES OF
SPD MATERIALS (Chair: M.J. Zehetbauer, A)
16:30-17:00
Keynote: A.S. Romanov (RUS)
Importance of Disclinations in SPD Materials
17:00-17:20
M. Seefeldt (B), P.van Houtte
Disclination-Based Modelling of Grain Fragmentation in Al and Ni
Polycrystals During Cold Torsion and ECAP
17:20-17:40
S.C.Baik, Y. Estrin (D), R.J.Hellmig, H.S.Kim
Modelling of Deformation Behaviour and Texture of ECAP Deformed
Aluminium
17:40-18:00
H.S. Kim (KOR), M.H.Seo, S.I.Hong
Process Modelling of Equal Channel Multi-Angular Pressing
19:00
Reception in City Hall, by Lord Mayor of Vienna
(for all participants and accompanying persons, planned)
2
Tuesday Dec 10, 2002
SESSION 5: TEXTURE EVOLUTION AND SIMULATION DURING SPD
(Chair: H.P. Stüwe, A)
8:30-9:00
Keynote: L.S. Toth (F)
Texture Evolution and Simulation in SPD Materials
9:00-9:20
E.F. Rauch (F), L.Dupuy
Textural Evolutions for Planar Simple Shear Versus Equal Channel Angular
Extrusion
9:20-9:40
W. Skrotzki (D), B. Klöden, R.Tamm, C.-G. Oertel, L.Wcislak, E. Rybacki
Grain Refinement and Texture Formation During High-Strain Torsion of
NiAl
9:40-10:00
I.J. Beyerlein (USA), R.A.Lebensohn, C.Tome, S.Vogel, M.A.Bourke, D.W.Brown
Modelling Texture and Microstructural Evolution During ECAP
10:00-10:30 Coffee Break
SESSION 6: DETAILS OF SPD NANOSTRUCTURES AS INVESTIGATED BY
ELECTRON MICROSCOPY (Chair: H.P. Karnthaler, A)
10:30-11:00
Keynote: G. Winther (DK), X.Huang
Boundary Characteristics in Nanostructured Materials from SPD
11:00-11:20
J. De Messemaeker (B), B.Verlinden, J.v.Humbeeck, L.Froyen
Quantitative Microstructural Analysis of IF Steel Processed by Equal Channel
Angular Extrusion
11:20-11:40
T. Waitz (A), V.Kazykanov, R.Z.Valiev, H.P.Karnthaler
HRTEM Investigations of Amorphous and Nanocrystalline NiTi Alloys
Processed by HPT
11:40-12:00
K.Kawasaki (JAP), H.Hidaka, T.Tsuchiyama, S.Takaki
Effect of Grain Size on Microstructure Development during Conventional
Deformation and Ball Milling in Polycrystalline Fe
12:00-14:30 Lunch
SESSION 7: ANALYSES OF SPD MATERIALS BY SELECTED
PHYSICAL METHODS (Chair: I.V. Alexandrov, RUS)
14:30-15:00
Keynote: T. Ungar (H)
X-ray Diffraction Analysis of SPD Materials
15:00-15:20
E. Schafler (A), L. Zeipper, M.Zehetbauer
X-Ray Profile Analysis of Severely Plastically Deformed Titanium Materials
15:20-15:40
Z. Trojanova (CZ), F.Riehemann, P.Lukac
Internal Friction of Nanocrystalline Mg
15:40-16:00
J.Cizek, I. Prochaska (CZ), G.Brauer, W.Anwand, R.Kuzel, M.Cieslar,
R.K.Islamgaliev
Ultra-Fine Grained Copper Prepared by High Pressure Torsion:
Spatial Distribution of Defects
3
16:00-18:00
COFFEE & POSTER SHOW I (POSTERS OF SESSIONS 1-7)
(Chair & Introduction: R. Pippan, A)
19:00
Social Evening Event: Vienna “Heurigen - The Wine of the Year”, in Grinzing
(for all participants and accompanying persons)
Wednesday, Dec 11, 2002
SESSION 8: INFLUENCE OF DEFORMATION PARAMETERS TO
SPD NANOSTRUCTURES (Chair: S.Dobatkin, RUS)
8:30-9:00
Keynote: M.J. Zehetbauer (A)
The Role of Hydrostatic Pressure during SPD
9:00-9:20
T. Hebesberger (A), R.Pippan, H.P.Stüwe
Influence of the Processing Parameters at High Pressure Torsion
9:20-9:40
Yu. Ivanisenko (D), A.Sergueeva, R.Valiev, H.-J. Fecht
Mechanical Properties and Thermostability of the Nanostructured Armco
Iron Produced by High Pressure Torsion
9:40-10:00
M. Furukawa (JAP), H.Akamatsu, Z.Horita, T.G.Langdon
Properties of Aluminium Alloys after Processing Using a 60 degrees Die
10:00-10:30 Coffee Break
SESSION 9: NEW METHODS OF SPD
(Chair: N. Hansen, DK)
10:30-11:00
Keynote: N. Tsuji (JAP)
ARB-Accumulated Roll Bonding and Other New Techniques of SPD
11:00-11:20
J. Alkorta (ES), J. Gil Sevillano
Optimal SPD Processing of Plates by Constrained Groove Pressing
11:20-11:40
C.P. Heason (GB), P.J.Apps, P.S.Bate, P.B.Prangnell
Comparative Study and Modelling of Accumulative Roll Bonding (ARB)
Processed AA8079 And AA1100
11:40-12:00
Y.T. Zhu (USA), J. Huang, T.Lowe
Processing of Nanostructured Metals Using Repetitive Corrugation and
Straighthening
12:00-14:30 Lunch
15:00
General Conference Excursion:
Type A: Schloss Schönbrunn – The Emperor’s Summer Residence
Type B: Schönbrunn Tiergarten – The World’s Oldest Live Animal Show
18:00
Common Meeting at Open Air Evening with Christmas Punsch
at Romantic Christmas Market of the Castle of Schönbrunn
4
Thursday Dec 12, 2002
SESSION 10: SPD WITH BALL MILLING AND POWDER CONSOLIDATION
(Chair: H. Gleiter, D)
8:30-9:00
Keynote: W.W. Milligan (USA)
Bulk Nanostructured Materials from Ball Milling and Consolidation
9:00-9:20
L. Froyen (B), M.Rombouts
Production and Consolidation of Nanocrystalline Fe Based Alloy Powders
9:20-9:40
C. Langlois (F), M.J.Hytch, P.Langlois, Y.Champion
Characterisation and Mechanical Properties of Nanostructured Copper
Obtained by Powder Metallurgy
9:40-10:00
H.J. Roven (NOR), I. Johansen
Microstructure and Properties of Severe Plastically Deformed Granular
Aluminium Alloys
10:00-10:30 Coffee Break
SESSION 11: MECHANICAL PROPERTIES AND THERMOSTABILITY OF
NANOCRYSTALLINE STRUCTURES (Chair: J. Weertman, USA)
10:30-11:00
Keynote: H. Van Swygenhoven (CH)
Atomistic Modelling of Strength of Nanocrystalline Materials
11:00-11:20
I.V.Alexandrov (RUS)
Multiscale Studies and Modelling of SPD Materials
11:20-11:40
D.H. Shin (KOR), K.-T. Park
Microstructural Stability and Tensile Properties of Nanostructured Low Carbon
Steels Processed by Equal Channel Angular Pressing
11:40-12:00
M.A.Munoz-Morris, C.Garcia Oca, G.Gonzales Doncel, D.G.Morris (ES)
Microstructure of Severely Deformed Al-Mg and Its Evolution
During Subsequent Annealing Treatments
12:00-14:30 Lunch
SESSION 12: INFLUENCE OF DEFORMATION PATH TO PROPERTIES OF
SPD MATERIALS (Chair: H. Mughrabi, D)
14:30-15:00
Keynote: V. Vinogradov (JAP)
Fatigue of SPD Materials
15:00-15:20
H.W. Höppel (D), M.Kautz, N.Barta-Schreiber, H.Mughrabi, R.Z.Valiev
Cyclic Deformation Behaviour and Possibilities to Enhance the Fatigue
Properties of Ultrafine-Grained Metals
15:20-15:40
A.Vorhauer (A), R.Pippan
The Influence of Type and Path of Deformation on the Evolution of Severe
Plastic Deformation Microstructures
15:40-16:00
G.A. Salishchev (RUS), S.V.Zherebtsov, S.Yu.Mironov
Formation of Submicrocrystalline Structure in Titanium During Successive
Uniaxial Compression in Three Orthogonal Directions
5
16:00-18:00
COFFEE & POSTER SHOW II (POSTERS OF SESSIONS 8 – 15)
(Chair & Introduction: E.Aernoudt, B)
19:00
Vienna Ringstraße Sight Seeing Tour
20:00
Festive Dinner in Original Old Vienna Style, at Palais Pallavicini
Friday, Dec. 13, 2002
SESSION 13: FEATURES AND MECHANISMS OF SUPERPLASTICITY IN
SPD MATERIALS (Chair: A.K. Mukherjee, USA)
8:30-9:00
Keynote: C.Xu, M.Furukawa, Z.Horita, T.G. Langdon (USA)
Achieving a Superplastic Forming Capability
Through Severe Plastic Deformation
9:00-9:20
Z. Horita (JAP), K.Matsubara, T.G.Langdon
Production of Superplastic Mg Alloys Using Severe Plastic Deformation
9:20-9:40
M.M. Myshlyaev (RUS), M.M.Kamalov, M.M.Myshlyaeva
High Strain Rate Superplasticity in An Micrometer-Grained Al-Li Alloy
Produced by Equal-Channel Angular Extrusion
9:40-10:00
Y.R. Kolobov (RUS)
Diffusion Controlled Processes and Plasticity / Superplasticity of
Nanostructured Materials Processed by Severe Plastic Deformation
10:00-10:30 Coffee Break
SESSION 14: MECHANISMS OF DIFFUSION RELATED PROCESSES IN
NANOCRYSTALLINE MATERIALS (Chair: H.E. Schaefer, D)
10:30-11:00
Keynote: R. Würschum (A)
Diffusion in Nanocrystalline Materials
11:00-11:20
W. Sprengel (D), V.Barbe, S.Herth, O.Gutfleisch, R.Würschum, H.-E.Schaefer
Interface Structure and Self-Diffusion in Ultrafine Grained Pr2Fe14B and
Nd2Fe14B Hardmagnets
11:20-11:40
V.N. Perevezentsev (RUS)
Theoretical Investigation of Non-Equilibrium Grain Boundary Diffusion
Properties
11:40-12:00
T. Sakai (JAP), H.Miura, A.Belyakov, K.Tsuzaki
On Annealing Mechanisms Operating in Ultra Fine-Grained Alloys
12:00-14:30 Lunch
6
SESSION 15: APPLICATION OF SPD MATERIALS
(Chair: D.H. Shin)
14:30-15:00
Keynote: T.C. Lowe (USA), Y. Zhu
Commercialization of Nanostructured Metals
Produced by Severe Plastic Deformation
15:00-15:20
V.A. Fokin (RUS)
The Main Directions in Applied Research and Developments of SPD
Nanomaterials in Russia
15:20-15:40
S.V. Dobatkin (RUS), P.D.Odessky, R.Pippan, G.I.Raab, N.A.Krasilnikov,
A.M.Arsenkin
Developing of Structure and Properties in Low-Carbon Steels During
Warm and Hot Equal Channel Angular Pressing
15:40-16:00
L. Zeipper (A), M.Zehetbauer, E.Schafler, B.Mingler, G.Korb
Mechanical Properties of Nano-SPD Titanium MaterialsExperiments and Constitutive Concepts
16:00-16:30 Coffee Break
16:30-18:00
FINAL CONFERENCE DISCUSSION
(Chairs: M.J.Zehetbauer & R.Z.Valiev)
18:00
Closing Ceremony
7
Poster Show I: POSTERS OF SESSIONS
1–7
Chair and Introduction: R. Pippan, A
POSTERS / SESSION 1: REASONS TO USE NANOSTRUCTURED MATERIALS
1.1
M. Suszynska (PL), I. Krajczyk and B. Macalik (tentative)
Hydrogen-Induced Formation of Silver and Copper Nanoparticles in Soda Lime
Silicate Glasses
POSTERS / SESSION 2: LARGE STRAIN COLD WORKING AND
MICROSTRUCTURE
2.1.
A.G. Mukoseev (RUS), V.A. Shabashov, V.V. Sagaradze and L.G. Korshunov
Phase Transformations in a High-Carbon Steel Induced by Cold Plastic
Deformation
POSTERS / SESSION 3: UNIQUE FEATURES OF SPD –
MICROSTRUCTURE & PROPERTIES
3.1
P.J. Apps (GB), C.P. Heason and P.B. Prangnell
The Effect of Second Phase Particles on the Deformation of Aluminium Alloys
during Equal Channel Angular Extrusion
3.2
V. Bengus (UKR) and S. Smirnov
Contribution of the Thermal Anisotropy Internal Stresses to Yield Stress
Anisotropy of Nanostructured Ti and its Increased Plasticity at 77 K
3.3
M. Bilousov (UKR) (tentative)
Formation of Nanostructures in High Nitrogen Steels
by Means of Severe Plastic Deformation
3.4
I. Brodova (RUS), D. Bashlykov, V. Stolyarov and T. Yablonskikh (tentative)
Ultrafine-Grained Microstructures from Rapid Quenching and Subsequent
SPD in Aluminium Alloys with Transition Metals
3.5
S.V. Dobatkin, V.V. Zakharov, R.Z. Valiev, A. Yu Vinogradov, T.D. Rostova, N.A.
Krasilnikov and E.N. Bastarash (RUS)
Nano- and Submicrocrystalline Structure Formation during High Pressure
Torsion of Al-Sc and Al-Mg-Sc Alloys
3.6
D.V. Gunderov (RUS), A.G. Popov, V.V. Stolyarov, N.N. Shchegoleva, A.R. Yavari
Crystallisation in Initial-Amorphous Nd2Fe14B Alloy during Severe Plastic
Deformation
3.7
O.A. Kashin (RUS), E.F. Dudarev, Yu.R. Kolobov, G.P. Grabovetskaya, G.P.
Pochivalova, G.P. Bakach and R.Z. Valiev
Comparative Investigation of Deformation Behaviour of Coarse-Grained and
Nanostructured Titanium
3.8
I.Yu. Khmelevskaya, I.B. Trubitsyna, S.D. Prokoshkin (RUS), S.V. Dobatkin, V.V.
Stolyarov and E.A. Prokoshkin
Structure and Funtional Properties of Ti-Ni-Based Shape Memory Alloys
Subjected to Severe Plastic Deformation and Heat Treatment
8
3.9
V.P. Kisel (RUS)
Universal Mechanisms of Dislocation Motion and Multiplication in Single and
Nanostructured Crystals
3.10
G. Krallics (H), Z. Szeles, I.P. Semenova, T.V. Dotsenko and I.V. Alexandrov
Experimental Investigations of the alloy Al-Mg-Si-Alloy subjected to
Equal-Channel Angular Pressing
3.11
O.B.Kulyasova, R.K.Islamgaliev, T.Weissgaerber, B.Kieback, N.Amirkhanov (RUS)
Microstructure and deformation behavior of SPD magnesium alloy (tentative)
3.12
A.N. Lachinov (RUS), I.V. Alexandrov, V.A. Kraikin and S.N. Salaskin
Structural and Physical Properties of Polymers Subjected to SPD
3.13
P. Lukac (CZ), V. Chmelik and Z. Trojanova
Mechanical Properties of AZ91 Alloy after Equal Channel Angular Pressing
3.14
V. Sklenicka (CZ) and J. Dvorak
Creep Behaviour of Pure Aluminium Processed by Equal-Channel Angular
Pressing
3.15
E.D. Tabachnikova (UKR), V.D. Natsik, A.V. Podolskiy, S.N. Smirnov, R.Z.
Valiev, V.V. Stolyarov and I.V. Alexandrov
Low Temperature Deformation and Failure of Some Nanostructured Metals
3.16
V.V. Tcherdyntsev (RUS), S.D. Kaloshkin, E.A. Afonina, D.V. Gunderov, I.G.
Brodova, Yu.V. Baldokhin, E.V. Shelekhov, V.V. Stoyarov and I.A. Tomilin
Aluminium-Based Al-Fe Solid Solutions by High Pressure Torsion of Rapidly
Quenched Alloys
POSTERS / SESSION 4: MODELLING OF SPD AND OF MECHANICAL
PROPERTIES OF SPD MATERIALS
4.1
N.Q. Chinh (H), Z. Horita and T.G. Langdon
The Nature of the Stress-Strain Relationship in Aluminium and Copper over a
Wide Range of Strain
4.2
N.A. Enikeev (RUS), H.S. Kim, I.V. Alexandrov and S.I. Hong
Deformation Behaviour of ECAP Cu as Described by a Dislocation Model
4.3
P.A. Gonzalez (ES), C.J. Luis
Severe Plastic Deformation by ECAP in an Al-Mg-Mn Commercial Alloy
4.4
R.J. Hellmig (D), S.C. Baik, J.R. Bowen, Y. Estrin, D.J. Jensen, H.S. Kim and
M.H. Seo
Evolution of Mechanical and Microstructural Properties of ECAP Deformed
Copper
4.5
E.V. Kozlov (RUS), A.N. Zhdanov, N.A. Popova and N.A. Koneva
An Integrated Model of Strengthening of UFG Materials
4.6
G. Krallics, I.N. Budilov, I.V. Alexandrov, G.I. Raab, V.S. Zhernakov (RUS)
Computer Simulation of the ECAP of W by means of the FEM method
9
POSTERS / SESSION 5: TEXTURE EVOLUTION AND SIMULATION DURING SPD
5.1
J. Bonarski, I.V. Alexandrov and L. Tarkowski (PL)
Heterogeneity of Microstructure and Crystallographic Texture in Cu and Ti,
Subjected to Equal-Channel Angular Pressing
5.2
M.I. Karpov (RUS), B.A. Gnessin, V.I. Vnukov, N.V. Medved and K.G. Volkov
Rolling and Annealing Texture of Nb and Cu Layers of the Bulk Multilayered
Nb-Cu Composite
POSTERS / SESSION 6: DETAILS OF SPD NANOSTRUCTURES AS INVESTIGATED
BY ELECTRON MICROSCOPY
6.1
N.A. Koneva (RUS), A.N. Zhdanov, N.A. Popova, L.N. Ignatenko, E.E. Pekarskaya
and E.V. Kozlov
Types of Grains and Boundaries, Joint Disclinations and Dislocation Structure of
UFG Materials
6.2
T. Koyama (JAP), H. Miyamoto, S. Hashimoto, A. Vinogradov and T. Mimaki
Microstructure and Development of Single Crystal Deformed by Equal Channel
Angular Pressing
6.3
B. Mingler (A), L. Zeipper and H.P. Karnthaler
TEM-Investigations of Titanium Deformed by Equal Channel Angular Pressing
6.4
G.N. Nurislamova (RUS), R.Z. Valiev and A.P. Zhilyaev
Microstructure and Grain Boundary Statistics in Ultrafine-Grained Pure Nickel
Study by TEM and OIM: Comparison Study
6.5
C. Rentenberger (A), H.P. Karnthaler and R.Z. Valiev
TEM Investigation of the Structural Inhomogeneity of HPT Processed Ni3Al
6.6
A.N. Tyumentsev (RUS), A.D. Korotaev, Yu.P. Pinzhin, I.A. Ditenberg, I.Yu.
Litovchenko, N.S. Surikova and R.Z. Valiev
Structural Models and Mechanisms for the Formation of High-Energy
Nanostructures under Severe Plastic Deformation
POSTERS / SESSION 7: ANALYSES OF SPD MATERIALS BY SELECTED
PHYSICAL METHODS
7.1
J. Gubicza (H), D. Fátay, K. Nyilas, S. Dobatkin and T. Ungár
X-Ray Peak Profile Analysis on the Microstructure of Al-5.9%Mg-0.3%Sc0.18%Zr Deformed by High Pressure Torsion
7.2
A.N. Lachinov, T.G. Zagurenko (RUS), V.M. Kornilov and I.V. Alexandrov
Diagnostics of Non-Equilibrium States in SPD-Materials by Injection Current
Method
10
Poster Show II:
POSTERS OF SESSIONS 8 - 15
Chair and Introduction: E. Aernoudt, B
POSTERS / SESSION 8: INFLUENCE OF DEFORMATION PARAMETERS
TO SPD NANOSTRUCTURES
8.1
A.A. Dubravina (RUS), I.V. Alexandrov and A.V. Sergueeva
Deformation Behaviour of Copper Subjected to High Pressure Torsion
8.2
L. Hollang (D), E. Thiele, C. Holste and D. Brunner
On the Influence of Temperature and Strain Rate on the Flow Stress of ECAP
Nickel
8.3
G. Raab (RUS), E. Soshnikova and X. Salimgareev
Features of ECAP of Hard-To-Deform Metals
8.4
A.P. Zhilyaev (ES), G.V. Nurislamova, B.-K. Kim, M.D. Baró, J.A. Szpunar and
T.G. Langdon
Grain Refinement and Microstructural Evolution in Nickel during
High-Pressure Torsion
POSTERS / SESSION 9: NEW METHODS OF SPD
9.1
Y. Beygelzimer (UKR), D. Orlov and V. Varyukhin
SPD by Twist Extrusion
9.2
Y. Beygelzimer, D. Orlov (UKR), V. Varyukhin and A. Minayev
The Role of Pressure during Obtaining Ultrafine Grained Materials by Twist
Extrusion
9.3
K. Higashida (JAP) and T. Morikawa
SPD Structures Associated with Shear Bands in Cold-Rolled Low SFE Metals
9.4
N.A. Krasilnikov (RUS), Yu. Ivanisenko and W. Lojkowski
Structure Refinement and Mechanical Properties of Nickel Subjected to Severe
Plastic Deformation
9.5
V.V. Latysh (RUS), V.S. Zhernakov, V.A. Shundalov and R.Z. Valiev
Producing Bulk Nanostructured Alloys using a Combination of SPD Techniques
9.6
M.M. Myshlyaev and S.Yu. Mironov (RUS)
Features of Mechanical Behaviour and Evolution Structure of
Submicrocristalline Titanium under Cold Deformation
9.7
H. Pashinska (UKR), S. Synkov, Y. Beygelzimer, D. Orlov, A. Ryeshetov,A. Mityev
Obtaining of Ultrafine Grained the Combination Twist Extrusion and
Conventional Metal Forming Processes
9.8
A.C.C. Reis (B), I. Tolleneer, L. Barbé and L. Kestens
Ultra Grain Refinement of Fe-Based Alloys by Accumulated Roll Bonding
9.9.
M.Umemoto, Y.Todaka (JAP) and K. Tsuchiya
Nanocrystallization in Carbon Steels by Various SPD Processes
11
POSTERS / SESSION 10: SPD WITH BALL MILLING AND
POWDER CONSOLIDATION
10.1
A. Belyakov (JAP), Y. Sakai, T. Hara, Y. Kimura and K. Tsuzaki
Annealed Microstructures in Mechanically Milled Fe-0.6%O Powders
10.2
S. Billards (F), G. Dirras, J.P. Fondere and B. Bacroix
Processing and Characterization of Nanocrystalline Material Obtained by Hot
Isostatic Pressing
10.3
A.V. Dobromyslov (RUS), R.V. Churbaev, T.L. Trenogina and E.K. Dolgich
Structure of Binary Titanium Alloys with Transition Metals Synthesized by
Mechanical Alloying from Elemental Powders under a High Pressure
10.4
H. Hidaka (JAP), K. Kawasaki, T. Tsuchiyama and S. Takaki
Effect of Oxide Particles on Thermal Stability of Ultra Fine-Grained Structure in
Mechanically Milled Iron
10.5
H. Inomoto, H. Fujiwara and K. Ameyama (JAP)
Characteristics of Nano Grain Structure in SPD-PM Processed AISI304L
Stainless Steel Powder
10.6
S.D. Kaloshkin (RUS), I.A. Tomilin and V.V. Tcherdyntsev
Thermodynamic Approach to Phase Transformations in Metallic Systems with
Immiscible Components under Plastic Deformation
10.7
R.Ye. Lapovok (AUS), P.F. Thomson, E. Williams
Densification of Particulate Magnesium by ECAE with a Back-Pressure
10.8
J.C. Werenskiold (NOR) and H.J. Roven
Properties of Granular Aluminium AA6082 Subjected to SPD by ECAP
POSTERS / SESSION 11: MECHANICAL PROPERTIES AND THERMOSTABILITY
OF NANOCRYSTALLINE STRUCTURES
11.1
J. Cizek (CZ), I. Procházka, R. Kuzel, M. Cieslar and R.K. Islamgaliev
Dependence of Thermal Stability of Ultra Fine Grained Metals on Grain Size
11.2
A. Betzwar-Kotas, V. Gröger (A), G. Khatibi, B. Weiss, I. Wottle and P. Zimprich
Thermomechanical Properties of Electrodeposited, Ultrafine Grained Cu Foils
for Printed Wiring Boards
11.3
N.I.Noskova (RUS) (tentative)
Scientific Principles of Deformation and Failure of
High-Strength Nanostructured Alloys based on Fe and Al
11.4
B.B. Straumal (RUS)
Deformation of Nanocrystalline Materials and
Grain Boundary Phase Transitions
11.5
A. Vorhauer, W. Knabl and R. Pippan (A)
Microstructure and Thermal Stability of Tungsten Based Materials after
Severe Plastic Deformation
11.6
R. Wadsack (A) and R. Pippan
Development of Microstructure and Thermal Stability of
Nanostructured Chromium Processed by Severe Plastic Deformation
12
POSTERS / SESSION 12: INFLUENCE OF DEFORMATION PATH TO PROPERTIES
OF SPD MATERIALS
12.1
I. Kim. G. Kim, D.H. Shin and Y.-S. Kim (KOR)
Microstructural Development of Titanium during ECAP
12.2
L. Kommel (EST), K. Kenk and R. Veinthal
Viscoplastic Behaviour of SPD Copper
POSTERS / SESSION 13: FEATURES AND MECHANISMS OF SUPERPLASTICITY
IN SPD MATERIALS
13.1
S.I. Hong (KOR), H.J. Kwon and H.S. Kim
Superplastic Behaviour of Deformation Processed Cu-Ag Nanocomposites
13.2
M.M. Myshlyaev, A.A. Mazilkin (RUS) and M.M. Kamalov
Features of Microstructure and Phase State in an Al-Li Alloy after ECA Pressing
and High Strain Rate Superplastic Flow
13.3
A. Mussi (F), J.-J. Blandin and E. Rauch
Microstructure Refinement and Improvement of Mechanical Properties of a
Magnesium Alloy by Severe Plastic Deformation
13.4
Yu.R. Kolobov, E.V. Naidenkin (RUS), E.F. Dudarev, N.V. Girsova, G.P. Bakach
and R.K. Islamgaliev (tentative)
Effect of Severe Plastic Deformation on Structure and Superplastic Properties of
Al-Mg-Li Alloys
13.5
K. Neishi (JAP), Z. Horita and T.G. Langdon
Grain Refinement and Superplastic Properties of Cu-Zn Alloys Processed by ECAP
13.6
N.K. Tsenev (RUS), N.F. Yunusova, R.K. Islamgaliev and A.M. Shammazov
The Influence of Precipitates on the Enhanced Superplasticity of UltrafineGrained Aluminium Alloys
POSTERS / SESSION 15: APPLICATION OF SPD MATERIALS
15.1
A.A. Popov (RUS)
Ways to Improve Strength of Titanium Alloys by Means of Intense Plastic
Deformation
15.2
V.G. Pushin (RUS)
Nanocrystalline Shape Memory TiNi-Based Alloys Produced by SPD and
Superrapid Solidification from Melt:Structures, Properties and Application
15.3
I.A. Ryzhikov (RUS) and A.L. Rakhmanov
The Technology of Nanostructured Functional and Intelligence Materials
15.4
J. Wang (CHI), C. Xu, Yu. Wang, X. Zhao, Z. Du, Z. Zhang and T.G. Langdon
Microstructure and Properties of a Low Carbon Steel after Equal-Channel
Angular Pressing
15.5
S.V. Zherebtsov (RUS), G.A. Salishchev, R.M. Galeyev, O.R. Valakhmetov and
S.L. Semiatin (tentative)
Formation of Submicrocrystalline Structure under Warm Severe Plastic
Deformation in Ti-6Al-4V Large-Scale Billets
13