C. V.
Name :
Mohamed Sayed Bayoumi Ebrahim
Date of Birth :
25-10-1954
Place of Birth :
Cairo
Nationality :
Egyptian
Address :
Aerospace Department, Faculty of Eng., Cairo
University
Personal :
Married, 2 Sons, 1 Girl.
Present Work :
Lecturer, Aerospace Department, Faculty of Eng.,
Cairo University
Previous Work :
At Aerospace Department :
From
2-10-1977
22-6-1982
31-12-1987
To
21-6-1982
30-12-1987
13-11-1993
Demonstrator
Assistant Lecturer
Assistant Prof.
At Al-Ahsa College of Technology
From
To
14-11-1993
26-6-1999
Assistant Prof.
From
26-6-1999
15-1-2008
At Aerospace Department
To
15-1-2008
Till now
Associate Prof
Education :
Ph. D. , “New Contributions in the Design of Combinational and
Asynchronous Sequential Control Systems”, Aerospace Dept., Cairo
University, 1987.
M. Sc. , “ Effect of Random Noise on the Measurement of Small
Rate of Tyrn by Vibratory Systems”, Aerospace Dept., Cairo University,
1982.
B. Sc. , Mechanical Eng., Mechanical Dept., Cairo University,
1977.
Course Taught : ( at Faculty of Eng., Cairo University )
Course
Mechanical Vibration
Automatic Control
Automatic Control systems of A/C
Optimal Control
Digital Control
Modern Control
Nonlinear Control
Systems and Control of A/C
Guidance and Control of A/C
System Dynamic
Logic Circuit Design and MPU Interface
Performance and Stability of A/C
Flight Mechanics
Programmable Logic Controllers
Instrumentation and system of A/C
Position
Mech. Dept.
Mech. Dept.
Aerospace Dept.
Aerospace Dept.
Aerospace Dept.
Aerospace Dept.
Aerospace Dept.
Aerospace Dept.
Aerospace Dept.
Aerospace Dept.
Aerospace Dept.
Aerospace Dept.
Aerospace Dept.
Aerospace Dept.
Aerospace Dept.
( At , Dept. of Mech. Tech., College of Technology at Al-Ahsa)
Principals of Pneumatic
Hyd., Pneu., Con., Div.
Pneumatic Systems
Hyd., Pneu., Con., Div.
Hydraulic Systems
Hyd., Pneu., Con., Div.
Hydraulic Systems of Aircraft
Hyd., Pneu., Con., Div.
Planning of Hydraulic Systems
Hyd., Pneu., Con., Div.
Digital Technology and Measurements
Hyd., Pneu., Con., Div.
Programmable Logic Controllers
Hyd., Pneu., Con., Div.
Electro- Hydraulic Systems
Hyd., Pneu., Con., Div.
Principles of Automatic Control
Hyd., Pneu., Con., Div.
Training courses Taught in the field of:
1- Sensors and instrumentation
2- Advanced Process control engineering
3- PLC control systems
4- PlC maintenance and troubleshooting.
5- Pneumatic and Hydraulic control systems.
6- SCADA and PLC systems.
7- Process control system.
Some Technical Publications :
1- “ Modification pole-zero placement controllers for better set
point tracking”, J. of the faculty of Eng., Cairo Univ., 19 p.,
1989.
2- “ Design as Describe method for both combinatorial and
asynchronous logic circuit”, J. of the faculty of Eng., Cairo
Univ., 18 p., 1989.
3- “Design of prototype production of small wind machine for low
wind speeds”, Energy conference, Cairo Univ., 1990.
4- “ A rotating mass spring damper under combind harmonic
random excitation”, 1-st. military technical conference, May,
1985.
5- M.A. EL-TANTAWIE, A.H. KASSEM, M.S BAYOUMI, S.D.
HASSAN “ Comparison between centralized and decentralized
controller of magnetic bearing system” proceeding of the 11th
international conference on applied mechanical engineering,
AMME, pp. 610-622, 2004.
6- M.A. EL-TANTAWIE, A.H. KASSEM, M.S BAYOUMI, S.D.
HASSAN “ Disturbance rejection with minimum order observer
in a magnetic bearing system” proceeding of the 11th
international conference on applied mechanical engineering,
AMME, pp. 623-634, 2004.
7- M.S AHMED, A.H. KASSEM, M.S BAYOUMI, S.D.
HASSAN “ Fault diagnosis of hydraulic variable-displacement
swash-plate axial piston pump using neural network”
proceeding of the 11th international conference on applied
mechanical engineering, AMME, pp. 635-652, 2004.
8- M.S AHMED, A.H. KASSEM, M.S BAYOUMI, S.D.
HASSAN “ Fault diagnosis of hydraulic cylinder circuit”
proceeding of the 11th international conference on applied
mechanical engineering, AMME, pp. 653-666, 2004.
9- "Reaction wheel momentum dumping using magnetic field
model", 8th Conference on Theoretical and Applied Mechanics,
Academy of Scientific Research and Technology in Cairo, 7-5April,2005.
10M. Abdelrahman, M Tantawy, M.S. Bayoumi " Adaptive
Neuro-Fuzzy Control Approach for Spacecraft Maneuvers",
International Journal on Automatic Control and System
Engineering(ICGST)(ACSE), vol. 6, Issue(2), pages(49-56),
June 2006.
11M.S.Bayoumi, " New Method For Designing Pneumatic
Sequential Logic Controller", 12th international conference on
Aerospace Sciences and Aviation Technology, in Cairo 29-31
May, 2007.
Some Supervised M. Sc. :
1- “ Microcomputer Position Controller set for a DC
servomotor Design, Analysis, Implementation and Testing
“, M. Sc., Cairo Univ., 1988.
2- “ Microprocessor Based simulation of the Boeing 737
hydraulic system”, M. Sc.,Cairo Univ., 1988.
3- “ Some contribution to sequential controller, Design,
Analysis, and Testing”, M. Sc.,Cairo Univ., 1989.
4- " Design and Simulation of a Tracker of a Maneuverable
Target Including Effects of Random Noise" ”, M. Sc.,Cairo
Univ., 1997.
5- " Development and Application of New Attitude Control
Algorithms for Spacecraft", Ph. D., Cairo Univ., 2002.
6- "A New Method for Design and 3D Simulation of Space
Vehicle", M.Sc., Cairo Univ., 2003.
7- "New Method for Simulation and Design of Space
Vehicle", M.Sc., Cairo Univ., 2003.
8- "Gyro-free inertial navigation system", M. Sc.,Cairo Univ.,
2004.
9- "Spacecraft Attitude/Power Tracking Control Using
Thrusters and Momentum Wheels", ”, M. Sc.,Cairo Univ.,
2005.
10- "Kinematics Dynamics and Control of Flight Simulator
Manipulators", M.Sc., Cairo Univ., 2006.
11- "Fault Diagnosis for Hydraulic Systems using Newral
Networks", Ph. D., Cairo Univ., 2006.
12- "Analysis, design, Implementation, and Testing of
Magnetorquer for Satalite", M. Sc., Cairo Univ.
University Contributions and Scientific Advisory:
1- Preparation professional educational programs to train Azhar`s
foreign students in the works of art and craft.
2- Modeling air brake circuits for Hienchel and Canadian train, and
building the programming model on the computer.
3- Design, Implementation and Testing many of the combinational and
sequential control systems.
4- Participate in modeling the movement of the train and building a
Simulator for training the drivers trains.
5- Participate in the design and implementation of Windmill.
6- Design and implementation of a set of educational experiments
collected in a educational bag.
7- Establish a control lab at Aerospace department, Faculty of
engineering, Cairo University.
Some Supervised B. Sc. Projects:
1- Design, implementation and testing of the speed and position control in
the two direction of DC motor using microcomputer controller.
2- Design, implementation, testing and installation of a training simulator
for fuel system of the Boeing 737.
3- Design and implementation of automated cutting machine using
hardware logic controller.
4- Design, implementation and testing of moon sensor used in satellite.
5- Design, implementation and testing control room that has temperature
control and air & magnetic field free.
6- Study, design and simulate experiments and laboratory devices for
liquid level control, speed and position controller, tension control, and
also pneumatic simulator.
7- Design, implementation and simulation of gyro free position
determination.