Instrumentation Engineer: SUMMARY: Capable of running engineering projects (for instrumentation of and automating test equipment) under the guidance of a department manager or a senior engineer. This position requires the candidate to review, specify, size, and requisition instrumentation for use in an engineering laboratory. The candidate will also be able to set up, run, train others on, and document the instrumentation system. Training on instrumentation and automation engineering will be provided as necessary. QUALIFICATIONS: Bachelor’s Degree in Mechanical or Electrical Engineering, with an interest in instrumentation. 0-5 years of instrumentation engineering experience Ability to understand and implement ANSI drawing standards Good communication skills Competent with Microsoft Office software (Word and Excel), or a similar package Knowledge/experience with Labview a plus Eligible to work in the United States Product Development Engineer and/or General Engineering Entry Level Hire: JOB DESCRIPTION: Product Development Engineer (Entry Level) SUMMARY: Capable of running engineering projects under the guidance of a department manager or a senior engineer. Capable of performing analysis work under the direction of senior engineers. Provide support for field operations and manufacturing under the guidance of a department manager or senior engineer. Some travel (domestic and international) may be required. QUALIFICATIONS: Bachelor’s Degree in Mechanical Engineering (Minimum), with good working knowledge of engineering fundamentals. 0-5 years of industry experience Ability to understand and implement ANSI drawing standards Good communication skills Competent with Microsoft Office software (Word and Excel), or a similar package Experience with Solid Modeling CAD and FEA is preferred Eligible to work in the United States Application Engineer - Entry Level Hire: JOB DESCRIPTION: Application Engineer (Entry Level) SUMMARY: Become knowledgeable about WoodGroup ESP product line and be able to provide technical assistance for selection of all equipment. Capable of sizing electric submersible pump systems based on review and analysis of well data. Capable of troubleshooting problematic applications and provide recommendations for corrective action. Provide field support on unique or problematic applications and provide guidance in selection of proper ESP equipment. Some travel (domestic and international) may be required. QUALIFICATIONS: Bachelor’s Degree in Petroleum Engineering, CHEME, ME, EE with good working knowledge of engineering fundamentals. 0-5 years of industry experience Good communication skills. Competent with Microsoft Office software (Word and Excel), or a similar package Must have strong verbal skills and ability to communicate on a technical level. Multi-Lingual is a plus. Travel will be domestic and international. Eligible to work in the United States Reliability Engineer/Extended Runlife Team Engineer – Entry Level Hire: JOB DESCRIPTION: Reliability Engineer (Entry Level) SUMMARY: Capable of developing a working knowledge of WGESP equipment (assembly procedures, installation practices, down hole operation of the system). Must work with a technical team whose primary focus is performing root cause failure analysis of failed field equipment. Must be able to evaluate well data, operational data and dismantle reports to determine cause of failure. From the root cause process must have ability to develop final report with list of corrective actions and recommendations for improvement that will extend the run life of the equipment. Requirements: Bachelor’s Degree in ME, EE with good working knowledge of engineering fundamentals. 0-5 years of industry experience Good communication skills. Competent with Microsoft Office software (Word and Excel), or a similar package Must have strong verbal skills and ability to communicate on a technical level. Multi-Lingual is a plus. Must work in a shop environment. Travel will be domestic and international. Eligible to work in the United States Design Drafter – Entry Level Hire: JOB DESCRIPTION: Design Drafter (Entry Level) SUMMARY: Capable of creating detailed computer aided mechanical design drawings, design data, assembly drawings, and documentation for the design and manufacture of WGESP products. Must be capable of creating this documentation from initial rough design input information (such as sketches, preliminary concepts, notes, mark up prints ). Must ensure drawings are complete, and verify proper fit and function. Requirements: Associates or Bachelor Degree in MET, ME with good working knowledge of engineering fundamentals. 0-5 years of industry experience Good communication skills. Competent with Microsoft Office software (Word and Excel), or a similar package Must have strong verbal skills and ability to communicate on a technical level. Multi-Lingual is a plus. Eligible to work in the United States Quality Engineer– Entry Level Hire: JOB DESCRIPTION: Quality Engineer (Entry Level) SUMMARY: Understand Structured Problem Solving to identify root causes and be able to effectively countermeasure these causes. Capable of understanding and supporting the WGESP Quality System. Must be able to interpret and understand machine/mechanical/electrical drawings. A working knowledge of material science is also a plus. Become familiar with metrology as related to gages and instruments and calibration procedures and concepts. Capable of understanding geometric dimensioning and tolerancing. Develop sound metrics based on quality techniques and statistical measurements to be used to support continuous process improvements. Requirements: Bachelor’s Degree in ME, EE with good working knowledge of engineering fundamentals. 0-5 years of industry experience Good communication skills. Competent with Microsoft Office software (Word and Excel), or a similar package Must have strong verbal skills and ability to communicate on a technical level. Multi-Lingual is a plus. Must work in a manufacturing environment. Travel will be domestic and international. Eligible to work in the United States