Architectural Specifications
CLEANSEAL Model 1290 EXCEL SLIDING VERTICAL RISE SEAMLESS MOLDED
FIBERGLASS DOOR SYSTEM (Power Operation)
DIVISION 8
SECTION 08300
SPECIALTY DOOR SYSTEMS
PART 1 - GENERAL
1.01 SECTION INCLUDES
A.
Sliding Vertical Rise Seamless Molded Fiberglass Power Door System and
accessories for complete installation.
1.02
RELATED SECTIONS
A.
1.03
Division 16 - Electrical
SUBMITTALS
A.
Submit with proposal:
1.
Product Data: Completely describing components.
2.
Recommended stock parts and maintenance plan.
B.
Submit prior to fabrication
1.
Shop Drawings: Showing details of fabrication, installation and accommodation to
connecting work.
1.04
2.
Installation Instructions: For door, operator and accessories.
3.
Operating and Maintenance Data: For door, operator and accessories.
QUALITY ASSURANCE
A.
Quality to meet FDA Standards.
B.
Installer Qualification: Door manufacturer, or trained, approved and licensed door
installer.
PART 2 - PRODUCT
2.01 MANUFACTURERS
01/7/07
A.
CleanSeal Model 1290 Sliding Vertical Rise Seamless Molded Fiberglass Power
Door System as distributed by NORTHERN DOCK SYSTEMS INC., Mississauga, Ontario.
Contact Sales Office at 1.866.601.1758 or sales@northerndocksystems.com.
B.
Substitutions:
No substitution will be considered unless written request for approval has been submitted by
the bidder and has been received by the architect at least ten (10) days prior to the date for
receipt of bids.
Each such request shall include the name of the materials for which it is to be substituted and
a complete description of the proposed substitute, including drawings, cuts, mockups,
performance and test data, a list of projects of similar scope and photographs of existing
installations, and any other information necessary for evaluation.
2.02
SLIDING VERTICAL RISE CLEANROOM DOORS
A.
CleanSeal Model 1290 Excel Sliding Vertical Rise Seamless Molded Fiberglass
Power Door System.
1.
Door size to fit door opening as shown on architectural drawings.
2.
Doors shall be electric power operated, 208/460 volt 3 phase, Sliding Vertical Rise
Molded Fiberglass Door System. Door speed: 12"/sec. open; 12"/sec. close.
3.
Door panel shall consist of two molded fiberglass reinforced polyester shells surfaced
with white polyester gel-coat and bonded into a seamless unit. FRP and plastic laminated
skins are not allowed. Corners and edges to be reinforced to a thickness of 5/8". Panel to be
reinforced with an internal 16 gauge channel steel frame with 1/4" steel attachment plates at
top for attaching panels. Also, a 20 gauge 304 stainless steel edge capping will be attached
on all four sides of panel for added strength and protection. (Color to be white ASI #944-W005.) 1-3/4" thick panel to be unitized and filled with pour-type polyurethane foam insulation.
or
1-3/4" thick door panel shall be made of 20 gauge type 304, #4 stainless steel and filled with
pour-type polyurethane foam insulation (rated at R-16) having a “K” factor of .12 at 75° F.
Panels to be reinforced with 20 gauge stainless steel edge capping on all four sides.
4.
Door actuation to be provided by:
a.
b.
Two manual pushplates
or
Two touchless pushbutton stations
5.
Assembly to be heavy duty 304 stainless steel construction. Assembly to incorporate
adjustments in both the vertical and horizontal planes for optimal sealing.
6.
Provide a counter-balanced door assembly. (Springs are not allowed.)
7.
Gasket at sides, head and sill to be vinyl, non-marking, bulb type, capable of holding
a seal under positive/negative pressures.
8.
Side frames to be 304 stainless steel construction, 12 gauge. When attached to the
wall, bolt heads, nuts, or fastener covers will be easily cleaned and minimal in appearance.
(Frames requiring these items will not be accepted.)
9.
Power drive system to be electromechanically operated, and stainless steel chain
driven for smooth speed operation. Motor to be 1/4 hp, 208/480 volt, 60 cycle, 3 phase.
Electrical components to be enclosed in a NEMA-4 rated enclosure.
01/7/07
10.
Electromechanical operator to be used in conjunction with a variable speed drive
system which controls acceleration, deceleration and stopping of door. Operators using
brakes to stop door motion are not allowed.
11.
Entire header, counterweight and operator assembly to be enclosed by a 16 gauge
stainless steel shroud.
12.
Door panel to be equipped with an electric, fail safe reversing edge effective full width
and full travel of door.
PART 3 - EXECUTION
3.01
EXAMINATION
A.
Verify installation conditions as satisfactory to receive work of this section. Do not
install until unsatisfactory conditions are corrected. Beginning work constitutes your
acceptance of conditions as satisfactory.
1.
3.02
Verify opening size, dimensions and tolerances.
PREPARATION
A.
Protect surrounding areas and surfaces to prevent damage during work of this
section.
3.03
INSTALLATION
A.
3.04
WARRANTIES
A.
3.05
Install the work in accordance with manufacturer instructions.
One year material and labor on door all components.
CLEANING
A.
Leave the premises clean and free of residue of work of this section.
Dedicated People – Superior Products – Reliable Service
DOCKS LEVELERS - WHALENADO HVLS FAS - ELEVATING DOCKS - SEALS & SHELTERS - OVERHEAD DOORS
1200 Aerowood Dr., Unit 25. Mississauga, ON., L4W 2S7 Phone (905) 625-1758 Fax (905) 625-0187
01/7/07