Intelligently HD Mixed Insertion Matrix
Matrix switcher is a flexible matrix signal switcher.High-performance hardware design
perfectly supports all kinds of HD digital and analog signal switcher, also supporting dual
RS-232 and dual IR signal distribution switcher function. It provides one-stop solution for
different kinds of vedio and control signal distribution processing. It is widely used in
broadcast television project, multimedia conference hall, LSD display project, television
education, command and control center, etc.
* Input and output: max supporting 8 signal inputs and 8 signal outputs.
* Card-insert construction: input signal types: VIDEO, VGA, YPbPr, DVI, HDMI, 3G-SDI, Fiber,
HDBaseT; output signal types: HDMI, VGA format, DVI, HDBaseT, Fiber. Card design is easy
for extension and change.
* Supporting any output of DVI, HDMI, HDBaseT, Fiber.
* Seamless switching function.
* Supporting embedded dual IR and RS-232 control signal switching function (need to match
up with HDBaseT, FB board card and relevant transmitter)
* Supporting HDCP managerment, encrytion and decoding HDCP content can be set up to
make sure that the disply of signal source is normal.
* Supporting EDID managerment, it can stock 8 groups EDID datas. The output equipment
EDID can be read and the stocked EDID can be used to any input card, which can send the
EDID code to EDID storage area by the serial port and the current output EDID code can
be read by the serial port.
* It has power-failure memory function and site memory function, and power-failure site
protection function; it can preserve and invoke 10 switching status.
* Supporting forward direction high speed channel and embedded control signal separation
switching mode.
* Supporing entire HD: HDPC:1920X1200P@60_24bit,HDTV:1920X1080P@60_36bit;
* Luxury crystal button and flashing directive function. The current switching signal can be
obtained directly by LCD conveniently.
* Supporting 3D, HDMI 1.4, HDCP1.4, and DVI 1.0 protocol. Supporting high color depth
and high 3.25Gbps speed.
* It is with 2 RS-232 communication interfaces.
* It is with 1 network interface and can be remote controlled by ethernet, supporting 8 user
connection simultaneously.
* It is built-in internationally universal power supply.
Input card qty
Output card qty
Input lines
output lines
Supporting input plug-in card type
TS-9208HR, TS-9208DR, TS-9208CR, TS-9208TR,
TS-9208GR, TS-9208SR
Supporting output plug-in card type
TS-9208HC, TS-9208DC, TS-9208CC, TS-9208TC,
TS-9208GC, TS-9208SC
Port bandwidth
3.25Gbps, full-digital
port control
Serial control interface
RS-232, 9-PIN D type interface
Baud rate and protocol
Baud rate: 9600, data bits: 8 bits, stop bit: 1,
Non odd-even parity bit
Serial control port construction
2 = TX, 3 = RX, 5 = GND
Ethernet control
Ethernet control port
RJ-45 female interface
Ethernet control protocol
Ethernet control speed
Self-adaption 10M/100M, Full duplex or hard duplex
Power supply
100V AC ~ 240V AC, 50/60 Hz,
International self-adaption power supply
Max power consumption
Product weight
Storage and operation temperature
-20℃~ +70℃
Storage and operation humidity
10% ~90%
Cabinet size
Mean time between failures
30,000 hours
Size (mm)
483(L) x 354(W) x 132.5(H)