SECTION 08 54 14
WOOD-ULTREX® GLIDER
PART 1 GENERAL
1.1 SECTION INCLUDES
A.
Ultrex® clad wood gliding window complete with hardware, glazing, weather strip, insect screen, removable grilles, grilles-between-the glass,
simulated divided lite, jamb extension, and standard or specified anchors, trim and attachments.
1.2 RELATED SECTIONS
A.
B.
C.
D.
E.
F.
G.
H.
I.
J.
K.
Section 01 33 23—Submittal Procedures: Shop Drawings, Product Data, and Samples.
Section 01 62 00—Product Options
Section 01 65 00—Product Delivery
Section 01 66 00—Storage and Handling requirements
Section 01 71 00—Examination and Preparation
Section 01 73 00—Execution
Section 01 74 00—Cleaning and Waste Management
Section 01 76 00—Protecting Installed Construction
Section 06 22 00—Millwork: Wood trim other than furnished by window manufacturer
Section 07 92 00—Joint Sealants: Sill sealant and perimeter caulking
Section 09 90 00—Paints and Coatings: Paint or stain other than factory-applied finish
1.3 REFERENCES
A.
B.
C.
D.
E.
F.
G.
American Society for Testing and Materials (ASTM):
1. E 283: Standard Test Method for Rate of Air Leakage through Exterior Windows, Curtain Walls, and Doors.
2. E 330: Standard Test Method for Structural Performance of Exterior Windows, Curtains Walls, and Doors by Uniform Static Air Pressure
Difference.
3. E 547: Standard Test Method for Water Penetration of Exterior Windows, Curtain Walls, and Doors by Cyclic Static Air Pressure Differential.
4. E 588-04: Standard Test Methods for Measuring the Forced Entry Resistance of Window Assemblies, Excluding Glazing Impact.
5. E 2190: Standard Specification for the Classification of the Durability of Sealed Insulating Glass Units.
6. C 1036: Standard Specification for Flat Glass.
7. E 90-09: Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements.
Window and Door Manufacturer’s Association (WDMA): I.S.4: Industry Standard for Water Repellent Preservative Treatment for Millwork.
Sealed Insulating Glass Manufacturer’s Association / Insulating Glass Certification Council (SIGMA / IGCC).
American Architectural Manufacturer’s Association / Window and Door Manufacturer’s Association (AAMA / WDMA):
1. AAMA/WDMA/CSA 101/I.S.2./A440-05: Standard Specification for windows, doors, and unit skylights.
2. AAMA/WDMA/CSA 101/I.S.2./A440-08: Standard Specification for windows, doors, and unit skylights.
Window and Door Manufacturer’s Association (WDMA): Hallmark Certification Program.
American Architectural Manufacturer’s Association (AAMA): 624-10: voluntary Specification, Performance Requirements and Test Procedures for
Organic Coatings on Fiber Reinforced Thermoset Profiles.
National Fenestration Rating Council (NFRC): 101: Procedure for Determining Fenestration Product Thermal Properties.
1.4 SYSTEM DESCRIPTION
A.
Design and Performance Requirements:
1. Window Units shall be designed to comply with AAMA/WDMA/CSA 101/I.S.2/A440-05 and AAMA/WDMA/CSA 101/I.S.2/A440-08 rating.
2. Air leakage shall not exceed the following when tested at 1.57 psf according to ASTM E 283:0.30 cfm per square foot of frame.
3. No water penetration shall occur when units are tested at the following pressure according to ASTM E 547:4.5 psf.
4. Units shall be designed to comply with ASTM E330 for structural performance when tested at the following pressures: (+/-45 Psf).
1.5 SUBMITTALS
A.
B.
C.
D.
Shop Drawings: Submit shop drawings under provisions of Section 01 33 23.
Product Data: Submit catalog data under provisions of Section 01 33 23.
Samples:
1. Submit corner section under provisions of Section 01 33 23.
2. Include glazing system, quality of construction, and specified finish.
Quality Control Submittals: Certificates: Submit manufacturer’s certifications indicating compliance with specified performance and design
requirements under provisions of Section 01 33 23.
08 54 14 - 1 Ultrex® Clad Wood Gliding Window Doc. 67366 Rev. 04/28/2014
CHECK MARVIN ONLINE DOCS FOR LATEST VERSION Printed on: 2/9/2016 8:01 AM
1.6 QUALITY ASSURANCE
A.
Code Requirements: Consult local code for IBC [International Building Code] and IRC [International Residential Code] adoption year and pertinent
revisions for information on:
1.
2.
3.
Egress, emergency escape, and rescue requirements
Basement window requirements
Window fall prevention and window opening control device requirements
1.7 DELIVERY
A.
B.
Comply with provisions of Section 01 65 00.
Deliver in original packaging and protect from weather.
1.8 STORAGE AND HANDLING
A.
B.
Prime or seal wood surfaces, including surface to be concealed by wall construction, if more than thirty (30) days will expire between delivery and
installation.
Store window units in an upright position in a clean and dry storage area above ground and protect from weather under provisions of Section 01
66 00.
1.9 WARRANTY
A.
B.
Windows shall be warranted to be free from defects in manufacturing, materials, and workmanship for a period of ten (10) years from purchase
date.
Window glass shall be warranted to be free from defects in manufacturing, materials and workmanship for a period of twenty years (20) from
purchase date.
PART 2 PRODUCTS
2.1 MANUFACTURED UNITS
A.
Description: Factory-assembled Ultrex® Glider (and related triple sash assemblies with stationary or picture units) as manufactured by Integrity
Windows and Doors, Fargo, North Dakota.
2.2 FRAME DESCRIPTION
A.
B.
C.
D.
Interior: Clear pine interior surfaces.
1. Kiln-dried to moisture content no greater than twelve (12) percent at the time of fabrication.
2. Water repellant preservative treated in accordance with ANSI / NWWDA I.S.4-94.
Exterior: Fiberglass reinforced fiberglass (Ultrex®), 0.080 inch (2 mm) thick.
Frame width: 4-9/16 inches (116 mm).
Flat bottom sill with 13 degree bevel.
2.3 SASH DESCRIPTION
A.
Clear pine interior surfaces.
1. Kiln-dried to moisture content no greater than twelve (12) percent at the time of fabrication.
2. Water repellant preservative treated in accordance with ANSI / NWWDA I.S.4-94.
B.
C.
Exterior: Pultruded reinforced fiberglass (Ultrex®), 0.070 inch (1.8 mm) thick.
Composite sash thickness: 1-9/16 inches (40 mm). Removable operator sash.
2.4 GLAZING
A.
B.
C.
D.
E.
Select quality complying with ASTM C 1036. Insulating glass SIGMA/IGCC certified to performance level CBA when tested in accordance with
ASTM E 2190. STC ratings are certified to the level in accordance with ASTM E90-09
Glazing method: 11/16 (17 mm) inch Insulating glass
Glass type: LoĒ - 180™, LoĒ2 - 272®, LoĒ3 - 366®, with air and Argon gas
Glazing seal: Silicone bedding at exterior and interior
Glazing Option: STC/OITC upgrade
2.5 FINISH
A.
Exterior: Pultruded Fiberglass. Factory baked on acrylic urethane. Meets AAMA 624-10 requirements
1. Color: Stone White; Pebble Gray; Bronze; Evergreen; Cashmere; Ebony.
08 54 14 - 2 Ultrex® Clad Wood Gliding Window Doc. 67366 Rev 04/28/2014
CHECK MARVIN ONLINE DOCS FOR LATEST VERSION Printed on: 2/9/2016 8:01 AM
B.
Interior: Treated bare wood; White interior factory finish.
2.6 HARDWARE
A.
Lock: High pressure zinc die-cast cam lock and keeper at meeting rail. Two locks on units with a frame height greater than 41 ¾” (1060).
1. Finish: Phosphate coated and electrostatically painted. Color: Almond Frost; White. Optional Bright Brass, Satin Nickel, and Oil rubbed
Bronze.
2.7 WEATHER STRIP
A.
Weather strip except the foam gasket is beige. The foam gasket is a neutral gray color. All units have full perimeter frame weather strip. The sash
is sealed to the jambs and header using a robust fabric foam weather strip. A hollow bulb type weather strip seals the operator and stationary
sash/jamb interface. Rigid vinyl interlock seals between the stationary sash and operator sash. A pile weather strip seals the bottom of the
meeting stile interface.
2.8 JAMB EXTENSION
A.
B.
Furnish jamb extension 6-9/16 (167 mm) inch factory installed; 6-13/16 (160 mm) inch shipped loose
Finish: Bare wood; White interior factory finish
2.9 INSECT SCREENS
A.
B.
C.
Factory installed half screen, screen covers operating sash opening and is removable to interior.
Screen mesh, 18 by 16: Charcoal fiberglass.
Aluminum frame finish: Stone White; Pebble Gray; Bronze; Evergreen; Cashmere; Ebony.
2.10 REMOVABLE GRILLES
A.
3/4 inch X 15/32 inch (19 mm X 12 mm) pine.
1. Pattern: Rectangular.
2. Finish: Clear pine; White interior factory finish.
2.11 GRILLES-BETWEEN-THE-GLASS (GBG)
A.
Manufactured from aluminum in an 11/16 (17mm) inch wide contoured profile placed between the two panes of glass. Available in rectangular
and prairie lite cut patterns. Prairie lite pattern – nine lite. Size limitations may apply to prairie lite cut availability.
1. Colors: White (white interior and exterior); pebble (white interior and pebble exterior); bronze (white interior bronze exterior); Evergreen
(white interior and evergreen exterior); Cashmere (white interior and cashmere exterior); Ebony (white interior and ebony exterior).
2.12 SIMULATED DIVIDED LITES (SDL)
A.
7/8 (22 mm) inch wide. Available with optional SDL internal spacer bar.
1. Exterior muntins: Extruded Ultrex. Available in rectangular, 9 lite prairie cut and Cottage cut with a 10 inch horizontal day light opening
height. Size limitations may apply to prairie lite and cottage lite cut availability.
a.
Color: Stone White; Pebble Gray; Bronze; Evergreen; Cashmere; Ebony.
2. Interior muntins: Clear pine; White interior factory finish.
B.
2 11/32 (60mm) inch wide. (Simulated check rail) - Available with optional SDL internal spacer bar.
1. Exterior muntins: Extruded Ultrex. Patterns available: check rail, check rail prairie, cottage, or cottage prairie. Size limitations may apply to
prairie lite and cottage lite cut availability.
a.
Color: Stone White; Pebble Gray; Bronze; Evergreen; Cashmere; Ebony.
2. Interior muntins: Clear pine; White interior factory finish.
2.13 ACCESSORIES AND TRIM
A.
B.
Exterior Casing:
1.
Non-integral to the unit. Fastened to the exterior wall with barb and kerf.
2.
2 inch Brick Mold available as a full surround or with sill nosing.
3.
3 ½ inch Flat Casing available as full surround or with sill nosing. Also available with 1inch Ranch style sill and header overhang.
4.
Color: Stone White, Pebble Gray, Bronze, Evergreen, Cashmere, Ebony.
Installation Accessories:
1.
2.
Factory installed vinyl nailing fin / drip cap at head, sill and side jambs.
Installation brackets: Brackets for 4-9/16 inch (116 mm); 6-9/16 inch (167 mm) jambs.
08 54 14 - 3 Ultrex® Clad Wood Gliding Window Doc. 67366 Rev 04/28/2014
CHECK MARVIN ONLINE DOCS FOR LATEST VERSION Printed on: 2/9/2016 8:01 AM
3.
4.
Mullion kit: Mullion kit for field assembly of units. Kit includes: Instructions, aluminum pins, filler blocks, wood mullion tie, sealant foam
tape, interior mullion trim, mullion insulation, screws and nailing fin connectors.
Structural mullion kit: Structural mullion kit for field assembly of units. Kit includes: Instructions, reinforcement member, aluminum pins,
wood mullion tie, sealant foam tape, interior mullion trim, screws, nailing fin connectors and structural brackets.
PART 3 EXECUTION
3.1 EXAMINATION
A.
B.
Verification of Conditions: Before Installation, verify openings are plumb, square, and of proper dimension as required in Section 01 71 00.
Report frame defects or unsuitable conditions to the General Contractor before proceeding.
Acceptance of Conditions: Beginning of installation confirms acceptance of existing conditions.
3.2 INSTALLATION
A.
B.
C.
D.
E.
Comply with Section 01 73 00.
Assemble and install window unit according to manufacturer’s instructions and reviewed shop drawings.
Install sealant and related backing materials at perimeter of unit or assembly in accordance with Section 07 92 00 Joint Sealants. Do not use
expansive foam sealant.
Install accessory items as required.
Use finish nails to apply wood trim and moldings.
3.3 CLEANING
A.
B.
Remove visible labels and adhesive residue according to manufacturer’s instructions.
Leave windows and glass in a clean condition. Final cleaning as required in Section 01 74 00.
3.4 PROTECTING INSTALLED CONSTRUCTION
A.
B.
Comply with Section 01 76 00.
Protect windows from damage by chemicals, solvents, paint, or other construction operations that may cause damage.
END OF SECTION
08 54 14 - 4 Ultrex® Clad Wood Gliding Window Doc. 67366 Rev 04/28/2014
CHECK MARVIN ONLINE DOCS FOR LATEST VERSION Printed on: 2/9/2016 8:01 AM