JUMO digiLine Opens the Door to Sensor
Technology 4.0
Intelligent, bus-capable connection system for digital
sensors in liquid analysis with integrated sensor
management
With digiLine, JUMO presents a new bus-capable connection
system for digital sensors. The system enables the creation
of intelligent sensor networks. All important measurement
parameters of liquid analysis can be measured with a single
system. A new pH probe and a redox probe were developed
for the market launch. In addition, proven JUMO products
can be integrated for turbidity and oxygen measurements.
JUMO digiLine pH and redox sensors are delivered as a unit
consisting of the sensor with reusable electronics. Once the pH
or redox component has become completely worn, the
connection is separated and the electronics can continue to be
used with a new sensor.
The JUMO digiLine sensor network increases the number of
sensors that can be connected to the JUMO AQUIS touch
multiparameter measuring and control devices. Furthermore,
JUMO digiLine sensors can be integrated directly in the JUMO
mTRON T automation system without an additional transmitter.
At present, no comparable solution is being offered by any other
manufacturer.
With JUMO digiLine, a diverse range of sensors can be
connected to each other in a star or tree structure. Then, only
one single digital signal line still runs to the evaluation unit or
controller. This enables more efficient and faster cabling of plants
in which several parameters need to be measured
simultaneously at various locations.
JUMO digiLine permits flexible solutions for almost every
application. This opens up entirely new possibilities for industrial
applications in the processing, food, pharmaceutical, and water
industry.
Alongside the digiLine protocol, most digiLine sensors are also
available with an analog output of 4 to 20 mA. This allows the
smart sensors to be integrated even in older systems.
Press release
PI 1990
Page 1 of 2
Editorial information:
Michael Brosig, Press Office
Phone: +49 661 6003-238
Fax: +49 661 6003-682
Email: michael.brosig@jumo.net
Technical information:
Reinhard Manns, Product Manager
Phone: +49 661 6003-493
Fax: +49 661 6003-605
Email: reinhard.manns@jumo.net
JUMO GmbH & Co. KG
Moritz-Juchheim-Str. 1
36039 Fulda, Germany
Phone: +49 661 6003-0
Fax: +49 661 6003-500
Email: mail@jumo.net
Internet: www.jumo.net
The system DSM software (Digital Sensor Management) is also
completely new. The necessary parameterization and calibration
of the pH or redox probe can be carried out conveniently in the
laboratory using a PC or laptop, a USB interface converter, and
the JUMO digiLine software. Calibration data and the evaluation
of the sensor status are stored directly in the sensor and enable
seamless documentation over the entire life cycle.
Image caption: JUMO digiLine is an intelligent, bus-capable
connection system for digital sensors in liquid analysis with
integrated sensor management.
The JUMO corporate group, headquartered in Fulda, employs more than 2,200 people
worldwide and is one of the leading manufacturers in the field of industrial sensor and
automation technology. JUMO products are used around the globe in industries such as
"heating and air conditioning", "food and beverage", "renewable energies", and "water and
wastewater". The corporate group encompasses five branch offices in Germany, 24
subsidiaries abroad, and more than 40 agencies around the world. The company posted a
turnover of 221 million euro in 2014.
Press release
PI 1990
Page 2 of 2