Press Release 1534, Page 1 of 3
JUMO GmbH & Co. KG, 36035 Fulda, Germany
Title: System optimization made easy
Controller startup software from JUMO
1534, Page 1 of 3
System optimization made easy
Controller startup software from JUMO
Controllers such as the JUMO IMAGO 500, JUMO DICON 500,
and now the new JUMO dTRON series, include a special
software tool in the setup program, for monitoring and
documenting the commissioning, thus making it considerably
easier.
This startup software enables the visualization and storage of
analog and binary signals while the system is being optimized.
Especially for complex processes, a real-time visual
presentation of the most important process data is practically
indispensable for the control engineer.
All you need for system optimization is one of the controllers
mentioned above, a PC or laptop with the setup program, and
an interface connection through a setup cable with an RS232 or
USB interface. This connection is required anyway for the setup
programming, and is therefore usually available.
Important settings, such as the free selection of signals to
display the individual analog and binary values in the
instrument, zoom, various print options, showing or hiding
individual curves, free scaling and choice of colors are all
included in this software tool as standard.
PR executive / Technical advisor
Stefan Käß
Phone: +49 661 6003-689
Fax: +49 661 6003-607
e-mail: stefan.kaess@jumo.net
Press Release 1534, Page 2 of 3
JUMO GmbH & Co. KG, 36035 Fulda, Germany
Title: System optimization made easy
Controller startup software from JUMO
The principal functions of the program cover:
 monitoring and documentation of the tuning or auto-tuning
phase
 generation of a setpoint step change to determine and record
the control-loop characteristics on the basis of the loop
response
 comparison of several different control loop results using
varied control parameters
 a sampled check of the control loop quality during production
operation or when a tool is changed
 saving these data files for quick dispatch by e-mail to an
expert advisory team.
The program is not just useful, it also provides a lot of other
advantages – also economic advantages – over conventional
process control monitoring, such as:
 no additional recorders or other peripherals required for
commissioning
 very little time required for assembly and cabling of the
measurement setup
 no attaching of extra sensing equipment to the system or the
analog signals from the controller
PR executive / Technical advisor
Stefan Käß
Phone: +49 661 6003-689
Fax: +49 661 6003-607
e-mail: stefan.kaess@jumo.net
Press Release 1534, Page 3 of 3
JUMO GmbH & Co. KG, 36035 Fulda, Germany
Title: System optimization made easy
Controller startup software from JUMO
 considerable time-saving through the simple Plug & Play
interface cable
 all the important process data at a glance
 simultaneous documentation of the system and/or
commissioning data.
Further information can be found at www.jumo.net.
PI1534.jpg
PR executive / Technical advisor
Stefan Käß
Phone: +49 661 6003-689
Fax: +49 661 6003-607
e-mail: stefan.kaess@jumo.net