Metrología Sariki S.A.
Formtracer Extreme SV-C3000CNC
A high-accuracy CNC surface roughness/form measuring instrument that allows
measurement of surface roughness and form/contour with one unit. When the detector
for form/contour measurement is replaced with that for surface roughness
measurement, or vice versa, it is a simple, one-touch replacement without re-routing of
the connecting cables. A high maximum drive speed of 200 mm/s enables a potentially
large increase in the throughput of multiple-profile/multiple-workpiece measurement
tasks. Models with the α axis can perform continuous measurement over horizontal
and inclined surfaces by power-tilting the X1 axis. Models with the Y axis table allow
expansion of the measuring range by repositioning in the Y-axis direction. Inclined
plane measurements through 2-axis simultaneous control in the X- and Y-directions is
possible.
Specification


























Contour measuring range X1 axis 200mm
Contour measuring range Z1 axis 25mm
Surface Roughness measuring range X1 axis 200mm
Surface Roughness measuring range Z1 axis 800 / 80 / 8µm (up to 2400µm
with an optional stylus)
Z2 axis vertical travel 500m
Surface roughness resolution 0.01 / 0.001 / 0.0001µm (Z1)
Accuracy X1 = ±(1+2L/100)µm* / Z1 = ±(2+|H|/25)µm**
Measuring speed 0.02-2mm/s
Measuring method Linear Encoder
Contour measuring force 30mN
Surface roughness measuring force 4mN or 0.75mN (low force type)
Traverse straightness 2μm / 200mm
Measuring Force 30mN
Resolution 0.05μm (X, Z2)
Stylus tip radius 25μm, carbide tip
Inclination angle -45° +10°
Measuring direction Forwards/Backwards, 70° (ascending/descending)***
Power consumption 500W (main unit only)
Stylus up/down operation Arc movement
Material Granite
Drive speed Max. 200m/s in X1 and Z2 / 0-60mm/s in X1 and Z2 (Joystick
mode)
Power Supply 100-240VAC ±10%, 50/60Hz
Base size 750 x 600mm
Dimensions 800 x 651 x 1000mm
Mass 250kg
Remarks * L = measured length (mm); ** H = measured height (mm); ***
Depends on surface roughness
www.sariki.es
ELGOIBAR
BARCELONA
MADRID
VIGO
PORTUGAL
Metrología Sariki S.A.
Features
The Fomtracer Extreme SV-C3000CNC is available in 8 different models.
Model No.
X1-measuring
range
Z2 axis vertical
Y-axis table unit
SV-3000CNC
200mm
300mm
N/A
SV-3000CNC
200mm
300mm
N/A
SV-3000CNC
200mm
300mm
Installed
SV-3000CNC
200mm
300mm
Installed
SV-3000CNC
200mm
500mm
N/A
SV-3000CNC
200mm
500mm
N/A
SV-3000CNC
200mm
500mm
Installed
SV-3000CNC
200mm
500mm
Installed



Since the Z1-axis detector incorporates an anti-collision safety device, the
detector unit will automatically stop even if its main body collides with a
workpiece or jig.
Supplied with an easy-to-operate Remote Box, on which the user can make any
movement by selecting the required axis using the two joysticks. The current
axis selection is easily identified by the icon on the key top.
Communication with the Data Processing/ Analysis section is via USB.
www.sariki.es
ELGOIBAR
BARCELONA
MADRID
VIGO
PORTUGAL
Metrología Sariki S.A.
www.sariki.es
ELGOIBAR
BARCELONA
MADRID
VIGO
PORTUGAL
Metrología Sariki S.A.
Página 3 de 4
Metrologia Sariki |Bº san Antolin, 9 – 20870 ELGOIBAR | Web.: www.sariki.es