Metrología Sariki S.A.
Formtracer SV-C4500
A high-accuracy surface roughness/form measuring instrument that allows
measurement of surface roughness and form/contour with just one unit. When the
detector for form/contour measurement is replaced with that for surface roughness
measurement, or vice versa, it is a simple, one-touch replacement without re-routing of
the connecting cables. The Z1-axis features a Laser Hologage detector giving
excellent narrow/wide range accuracy and resolution.
Specification



























Models available SV-C4500S4, SV-C4500H4, SV-C4500W4, SV-C4500S8, SVC4500H8
Contour measuring range X1 axis 200mm
Contour measuring range Z1 axis 60mm (±30mm from the horizontal)
Surface Roughness measuring range X1 axis 200mm
Surface Roughness measuring range Z1 axis 800 / 80 / 8µm (up to 2400µm
with an optional stylus)
Straightness (0.05+0.001L)µm
Z2 axis vertical travel 500mm
Contour resolution 0.05µm (X1), 0.02µm (Z1), 1µm (Z2)
Surface roughness resolution 0.01 / 0.001 / 0.0001µm (Z1)
Accuracy X1 = ±(0.8+2L/100)µm* / Z1 = ±(0.8+|0.5H|/25)µm**
Measuring speed 0.2-5mm/s
Measuring method Linear Encoder
Contour measuring force 10, 20, 30, 40, 50mN
Surface roughness measuring force 4mN or 0.75mN (low force type)
Traverse straightness 2μm / 200mm
Stylus tip radius 25μm, carbide
Inclination angle ±45°
Measuring direction Forwards/Backwards, (77° ascending, 87° descending)***
Power consumption 400W (main unit only)
Stylus up/down operation Arc movement
Material Granite
Drive speed 0-80mm/s and manual operation (X1), 0-30mm/s and manual
operation (Z2)
Power Supply 100-240VAC ±10%, 50/60Hz
Base size 1000 x 450mm
Dimensions 1406 x 575 x 1176mm
Mass 220kg (main unit), 14kg (controller), 0.9kg (Remote box)
Remarks * L = measured length (mm); ** H = measured height (mm); ***
Depends on surface roughness
www.sariki.es
ELGOIBAR
BARCELONA
MADRID
VIGO
PORTUGAL
Metrología Sariki S.A.
Features
The Formtracer SV-4500 is Available in 6 different models.
Model No.
Traverse range
Vertical travel
Base size
SV-C4500S4
100mm
300mm
600 x 450mm
SV-C4500S8
200mm
300mm
600 x 450mm
SV-C4500H4
100mm
500mm
600 x 450mm
SV-C4500H8
200mm
500mm
600 x 450mm
SV-C4500W4
100mm
500mm
1000 x 450mm
SV-C4500W8
200mm
500mm
1000 x 450mm



Expands measurement range while reducing workpiece interference Mitutoyo’s
newly designed detector arm lowers workpiece interference while expanding
the measurement range in the Z1 axis (detector).
Upper and lower surfaces can be measured continuously by using Mitutoyo’s
double-sided conical stylus. This continuous measurement data can be used to
facilitate analysis of features that were difficult to measure before, such as the
effective diameter of an internal screw-thread.
The one-step calibration kit supplied with the SV-C4500 Series has been
upgraded to enable easy calibration of the double-ended conical stylus
featuring a contact on both the top and the bottom. Fiddly work such as
calibrating the Z1-axis gain, symmetry, and stylus radius can now be carried out
in a single operation.
www.sariki.es
ELGOIBAR
BARCELONA
MADRID
VIGO
PORTUGAL
Metrología Sariki S.A.
www.sariki.es
ELGOIBAR
BARCELONA
MADRID
VIGO
PORTUGAL
Metrología Sariki S.A.
Página 3 de 4
Metrologia Sariki |Bº san Antolin, 9 – 20870 ELGOIBAR | Web.: www.sariki.es