Thermo Scientific
Konelab 20XT and Konelab 20
Fully automated Konelab systems
 Compact and proven analyzers
 Easy and cost-efficient to use
2
Konelab 20:
Konelab 20XT:
• Capacity up to 200 tests/hour
• Capacity up to 250 tests/hour
• For routine clinical chemistry
testing
• For routine and esoteric clinical
chemistry testing
Product overview
3
Konelab 20
Konelab 20XT
Capacity
up to 200 tests/hr
up to 250 tests/hr
ISE option
Na+, K+, Cl-, Li+
Na+, K+, Cl-, Li+
TDM/DAT
No
Yes
Sample positions
Up to 84 on-board,
5 STAT samples
Up to 84 on-board,
5 STAT samples
Reagent positions
35 cooled
35 cooled
Cuvette storage
positions
600
600
Mixing
Needle mixing
Separate mixing paddle
Continuous
access to
samples,
reagents
and
cuvettes
Wide test range - with user-defined application flexibility
• CE marked, bar coded system reagents
•
•
•
•
•
Enzymes and substrates
Electrolytes
Specific Proteins
Drugs of Abuse Tests in the model 20XT
Therapeutic Drug Monitoring in the model 20XT
• Over 80 carefully validated methods according to IFCC and other
widely used recommendations
• Can easily be complemented by user definable applications
• Special applications to be validated by the customer or distributor
4
Flexible, automated operation
• Possibility for up to 4 reagent additions per test
• Automated sample pretreatment feature
• Versatile dilution features
• Pre-dilution possibility
• Post-dilution with both high and low secondary dilution ratios
• Calibrator set made automatically from one stock calibrator for
most specific proteins
• Different sample types can be analysed
at the same time
• Important in drug monitoring
and therapeutic control
• Reflex testing
• Saves time and money when finding out
the specific test to be run
5
Productive, accurate analysis
• User-safe and contamination free
measurement
• Proven, unique, single use 12-cell cuvette
• Cost-effective due to low reaction volume
• Only 100 to 250 l
• Typically 120 - 200 l
• Flexibility and long walk-away time
• Cuvette storage enables up to 2.5 hours
walk-away time
• Continuous loading access without
interrupting testing
6
Bright graphical user-interface
• Advanced fully graphical user-interface
• Provides fast guidance
• Makes the analyser easy to use
• Available in more than 20 language versions
• Back-up possibilities
• On hard disk
• On CD/ USB
7
Safe sample handling
• Error free sample handling
• Automatic sample identification,
direct barcode reading and cup/ tube recognition
• Bidirectional LIS interface for quick data transfer
• Continuous sample loading
• Sample tubes
• 5, 7 and 10 ml tubes
• 0.5 and 2 ml sample cups
8
Sample disk
• 84 samples, calibrators
and controls on board
• 6 segments, 14 pos. in each segment
• 5 dedicated urgent (STAT)
positions
• Possibility to load also into segments
9
Automated sample pretreatment
• Saves the operator time, e.g. by automating hemolyzation in
HbA1c measurement
• Improves quality by minimizing operator variation
• Dedicated sample segment for whole blood samples
•
10
For one segment hemolyzation takes about 10 min,
total turnaround time about 30 min
Convenient reagent handling
• Reagents can be added at any time
• Continuous monitoring possibility
• Flagging of expired reagents
• Determination of vial volume
• Estimation of reagent sufficiency
• Automatic bottle change-over increases the walk-away time
• Possibility to run QC with every new bottle
• Used reagent lots can be archived
11
Reagent disk
• 35 vial positions
• External barcode reader
• Cooled disk
12
Simultaneous electrolyte measurement
• Direct measurement method used in Konelab
• Generally considered the most accurate ISE method
• Serum, plasma and urine samples
• Direct or by manually pre-diluted urine sample
• Micro volume electrodes for even smaller sample volumes
• Sample volume of only 50 l is sufficient for Na+, K+ and Cl• Additionally 6 l if Li+ is required
• Maintenance-free electrodes
• Delivered ready-to-use
13
Minimal maintenance - no water supply or drainage requirements
• Daily – 5 min
•
•
•
•
Fill distilled water, empty waste water container
Empty cuvette waste compartment
Perform Start up and Stand by procedures
Check the bag of ISE Calibrator solution 1
• 6 months maintenance
• Change diluent/ wash tubes
• Change the lamp
• 12 months maintenance
•
•
•
•
14
Change the syringe
Change the dispensing needle
Change the mixing paddle in 20XT
Change drain/ waste tubes
Technical and application expertise all the way
• Konelab analyzers are supported with
• Customized installation
• Product training
• Product & Application support
• After-sales support
• Maintenance contracts
• Technical service
15
Fulfilling requirements
• Quality system is certified according to
the ISO 9001:2000 standard extended
with the EN ISO 13485:2003
• Konelab systems are compliant with
the requirements of the In Vitro
Diagnostic Medical Device Directive
(IVDMDD)
16
Key benefits of Konelab analyzers
• Easy to use
• Clearly laid out, simple to navigate user interface
• Automation and analyst efficiency
• Once loaded, the analyzer will run without
the assistance of the analyst
• Automatic dilution of an over range sample
• Automated sample pretreatment feature
• Reflex test possibility
• Different types of samples can be analysed at the same time
• Important in drug monitoring and therapeutic control
• User-safe and contamination free analysis
• Disposable cuvettes
• Productivity
• Low reagent volumes -> low cost per test, important in expensive tests
• Quick daily start up
• Minimal maintenance
17
Key benefits of Konelab analyzers
• Carefully selected methods and applications
•
•
•
•
Over 150 CE-marked reagents
Optimized kits serve different-sized laboratories
Ready for use, stable liquids
System-specific multi-calibrators and controls
• Flexible software
• Easy method set-up
• Special applications to be validated by
the customer or distributor
• Direct electrolyte measurement
• The most accurate ISE method
• Maintenance-free electrodes
delivered ready-to-use
• Full application and technical support
18
One reagent line to be used in all Konelab analyzers
 -1-Antitrypsin
Apolipoprotein A1 and B
Ceruloplasmin
Complement C3 and C4
C-reactive protein
Cystatin C
High Sensitive CRP
HbA1c
Haptoglobin
IgA, G and M
Lipoprotein (a)
Microalbuminuria
Myoglobin
Orosomucoid
Prealbumin
Rheumatoid factors
Transferrin
TDM
Electrolytes
Na, K, Cl
Ca, pH
Albumin
Antistreptolysin O
DoA (DAT)
ACP
ALP
ALT/GPT
AST/GOT
Amylase
Cholinesterase
Dibucaine
CK
CK-MB
Gamma-GT
-HBDH
LDH
Lipase
Specific Proteins
Enzymes
Substrates
19
Albumin
Total and Direct Bilirubin
Carbon Dioxide
Calcium
Cholesterol
HDL and LDL Cholesterol
Creatinine
Glucose
Iron
Magnesium
Phosphorus
Total Protein
Triglycerides
U/CSF Protein
Urea
Uric Acid
Amphetamine
Barbiturates
Benzodiazepines
Cannabinoids
Cocaine Metabolite
Opiates
Cotinine
Ethyl Alcohol
Methadone
Propoxyphene
Carbamazepine
Phenobarbital
Phenytoin
Theophylline
Valproic Acid
Lithium
Konelab 20XT and Konelab 20
For convenient and
precise clinical chemistry
analysis!
20