JOINT STOCK COMPANY «DRILLING SYSTEMS» well construction
2011
JSC, Drilling Systems has been established in the year 2005. As per today company numbers is around 600 employees.
JSC, Drilling Systems operates in oil&gas well construction field and performs all kinds of drilling activity for all
oil&gas companies in Russia.
Main activity:
• Construction of exploratory, development, production wells, including horizontal and flat wells;
•Recovery of inactive wells by kickoff and drilling of sideholes method;
•Rendering of service in well construction:
-IPM
-supervising
-backfill servicing
-drilling mud servicing
-rig building
The Company is organized in accordance with international standards of management, registered in IADC. It has united
the best specialists, that had drilled hundreds of wells in remote areas with different and complex climatic and geological
conditions.
Drilling fleet of the Company consists of domestic and foreign АPI-certified equipment.
Rig type
ZJ70DBS*
ZJ50DBS
БУ 3000 ЭУК
БУ TZJ30
БУ TZJ20
БУ 1600/100 ЭУ
Quantity
Maximum
hook load
capacity, t
Capacity, HP
Depth of
drilling, m.
Drive type
Design
1
450
2700
7000
diesel
block
315
1900
5000
3
200
700
3000
electric
echelon
УНБ-600\2
2
180
1000
3000
electric
Block, on trailer
8Т650-01\2
125
650
2000
Block, on trailer
8Т650-01\2
670
1600
3
4
4
ZJ70DBS* - in acquisition stage
100
diesel
diesel
electric
block
block
Drill pump
F-1600\2
F-1600\2
УНБ-600
Foreign – made rig’s advantages:
- possibility to operate both from industrial networks and off-line ( the rigs are equipped with high power Caterpillar generating
plants);
- up-to-date electronic control ABB, Siemens;
- unit is equipped with top drive TDS 9SA, TDS 11SA (Varco);
- highly reliable disk drawworks with air cooling;
- pumping block includes triplex pumps power 1600 H.P. with AC drive of frequency regulation;
- cleaning system is four staged, Derrick production
The drilling rigs are designed both for drilling of single exploratory wells and development wells in a cluster. The operating
temperature range for the drilling rigs is from – 40 up to + 50 degrees С. All the foreign-made rigs include the equipment, which
allows drilling under API system.
STATIONARY DRILLING RIGS ZJ 50 DBS, ZJ 70 DBS
ZJ50DBS
ZJ70DBS
Nominal drilling depth, m
5000
7000
Maximum hook load capacity, kN
3150
4500
Maximum drill pipe weight, kN
1800
2700
Drill line diameter, mm
35
38
Rig useful height, m
45
41
Working floor height, m
9
9
Draw work capacity, HP
1900
2700
Rotary table diameter, mm
950
950
Drill pump capacity, HP\ 2 units
1600
1600
MOBILE DRILLING RIGS TZJ 20, TZJ 30
ТZJ20DBS
ТZJ30DBS
Nominal drilling depth, m
2000
3000
Maximum hook load capacity, kN
1250
1800
Total capacity of drilling pump, HP.
2х650
2х650
Drill line diameter, mm
28
32
Rig useful height, m
36
38
Working floor height, m
6
6
Draw work capacity, HP
650
1000
Rotary table diameter, mm
560
560
Swivel
SL 160
SL 225
All the specialists of our company are highly skilled and have an experience in oil&gas industry more than 10 years.
Under supervision and command of these specialists more than 2000 wells were drilled in remote areas with
seasonal constraints in logistics and extreme temperatures. While drilling process the Company applies for all the spectrum
of technologies to operate accident-free. Drilling Systems has a wide experience in realizing of complicated projects in
permafrost, extreme temperature conditions. Company uses technology of horizontal drilling, well recovery, sidetracking
methods.
The number of drilling crews is 6 . 16 drilling rigs, 23 units of backfill techniques are in arsenal of the Company.
Qualification:
- 65% of staff have higher and technical secondary
education
- 25% of staff have specialized secondary education
Age structure:
-57% are younger than 40 y.o.
-24% are from 40 tо 50 y.o.
-19% are older than 50
Experience of working: oil wells.
1. Exploration drill hole (including abnormally
high formation pressure).
Depth – 4500 m.
Well ПО-5 of Nerutinskaya area (Nadym region).
Construction:
426х500 m.
324х1500 m.
245х3675 m.
184х3175–3865 m.
140х4200
Anomaly factor – 1,7
2. Vertical and directional wells (production, injection,
water wells). Depth - 4000 m. Offset –2000 m.
Well № 1196 Sugmutskoye oilfield (Noyabrsk
region)
Depth (of vertical line) – 2900 m.
Depth (of borehole) – 3850 m.
Offset– 1963 m.
3. Horizontal well.
Depth - 4000 m.
Lengths of horizontal part – 600 m.
Well № 2047 Romanovskoye oilfield (Noyabrsk
region)
Depth (of vertical line)– 2787 m.
Depth (of borehole) – 3770 m.
Lengths of horizontal part– 560 m.
4. Sidehole with horizontal completion.
Depth – 4000 m.
Lengths of horizontal parts - 500 m.
Well № 112 Vostochno-Tarko-Salinskoye oilfield
(Tarko-Salynsk region)
Depth (of vertical line) – 2860 m.
Depth (of borehole) – 3538 m.
Lengths of horizontal part – 250 m.
Company’s geography:
Yamalo-Nenetskyi Autonomous Region
(Надым, Н.-Уренгой, Тарко-Сале,
Губкинский, Ноябрьск)
Ural Volga Region
(Udmurt Republic, Tatarstan,
Ulyanovsk, Samara, Kurgan)
“”Samara-Nafta”
“Ulyanovskneft” (Rusneft)
«Nafta-Ulyanovsk» (Rusneft)
“TatRitecNeft” (RITEC)
“Belcamneft” (Rusneft)
“”RitecNadymneft” (RITEC)
“GazpromDobychaNadym” (Gasprom)
“Techneftinvest”
“Sibneftegaz”
“Noyabrskneftegaz” (Sibneft, Gazpromneft)
Khanty- Mansyiskyi Autonomous
Region
(Kogalym, Nizhnevartovsk,
Raduzhnyi, Khanty-Mansyisk,
Nyagan)
“NGDU “Ritecneft” (RITEC)
“Negusneft”
Kazakhstan (Atyrau,
Actubinsk)
“Kokzhidemunai”
“Potencialoil”
“KazakhOilActobe”
Irkutsk
«Irkutsk oil Company»
«RUSIA-Petroleum»
.
Sustainable
development for the Company means harmonizing the interests of economic growth and careful attitude
to environment.
Oil and gas drilling is inevitably followed with man-caused effect on environment. Degree of pollution depends on
application of technology, level of equipment and qualification of personnel. Specialists of Drilling Systems, JSC try to minimize
negative effect on environment using advanced drilling technologies, new equipment and cleaning facilities.
-low toxic substances of the 4th danger class are used as mud chemicals;
-used drilling mud is used again for drilling new wells. In this case 4-stage cleaning with shale shakers, descanters and desilters
are used;
-under high requirements for environment safety, closed cycle system is used – drilling without mud pits when used drilling mud is
cleaned with technology of coagulation and flocculation and passing through centrifuge as well.
Conceptual issues of ecological policy of the company:
- preservation and rational use of natural resources;
- maintenance of ecological safety on all industrial objects of the company
- decrease in emergency situations
So far “Drilling Systems” has had no one administrative claim and punishment from control authorities for breach of
environment
protection laws all over Russia!
.
OCCUPATIONAL HEALTH AND INDUSTRIAL SAFETY
- Safety in all lines of operational activity is the main target of the enterprise (company). Maximum risk mitigation, prevention of
personal injuries and accidents at drilling rigs, close environmental control – are the main activities the management follows
to deliver on these targets.
- Industrial Safety and Occupational Health activities are in accordance with the requirements of the Federal Law “On Industrial
safety of hazardous production facilities» (Federal Law # 116 of 21 July 1997 , RF Labor Code adopted on 21 December
2001) and other regulatory documents, including API Standards .
- The company has all the required licenses for all lines of activities to be performed
- According to the requirements of these documents all the specialists of DRILLING SYSTEMS have been trained and evaluated
in Industrial Safety, the managers have been evaluated by the RF FSETAN Central Commission
- We operate the equipment and facilities certified by quality, insured and registered.
HSE POLICY
JSC “Drilling systems” considers the development of industrial safety system, ensuring healthy and safe work conditions of the personnel as
well as mitigation of environmental impact to be one of the priority lines of its activity. It is possible to achieve the set goals under sustainable
development of the company, which in many respects can be ensured by the balanced salvation of social and economic problems,
environmental protection and natural resources preservation.
In this respect the company’s policy is inseparably linked with the current regulatory structure of the Russian Federation in the field of industrial
and environmental safety, as well as with the recommendations of the ISO 14000 and OHSAS 18000 international standards
JSC “Drilling systems” considers the development of industrial safety system, ensuring healthy and safe work conditions of the personnel as
well as mitigation of environmental impact to be one of the priority lines of its activity. It is possible to achieve the set goals under sustainable
development of the company, which in many respects can be ensured by the balanced salvation of social and economic problems,
environmental protection and natural resources preservation.
In this respect the company’s policy is inseparably linked with the current regulatory structure of the Russian Federation in the field of industrial
and environmental safety, as well as with the recommendations of the ISO 14000 and OHSAS 18000 international standards
OUR VALUES:
- We believe that the team spirit, unity – are the basis of our individual and corporate actions.
Just well-coordinated and organized work, common goals, life values, which unite us, lead to the development
of the company we are proud of.
- We believe in performance of operations without accidents and incidents
- HSE issues are of great importance to us
- We design and carry out high quality operations
- We understand the demands of our Customers
СERTIFICATION
СERTIFICATION
LABORATORY
Drilling Systems, JSC has own
drilling mud laboratory (according
with API standards) and backfill
laboratory (according to RF State
standards).
MUD CLEANING EQUIPMENT
shaking sieve
centrifuge
(450х1000)
Drilling mud
cleaner
centrifuge
(355х1257)
Addition: technical characteristics of drilling rigs
DESCRIPTION OF EQUIPMENT
SPECIFICATIONS
DRILLING RIG – GENERAL SPECIFICATIONS
TZJ20
Name and Serial Number of Drilling Rig
Manufacturer
Drive
Arrangement of drive
Depth of drilling with 114-mm drill pipes
TZJ20
China,
Diesel
Cardan shaft and chain reducer
2000m
ZJ30DBS
ZJ30 DBS
China,
Diesel
Cardan shaft and chain reducer
3000 м
DRAWWORKS
Manufacturer
Model, type
Drive
Rated input
Power supplied to drawworks
Load capacity at line string-up 5х 4
Main brake
Auxiliary brake
China,
JC21F
Diesel САТ3412
475 Kwt
475 Kwt
125t (1250кN)
Brake tape
WCB224(EATON) water-cooled
China,
JC28/11,
Diesel
410x2 kW
410 x2kW
(5х6) 280t (2800kN)
Brake tape
WCB324(EATON) water-cooled
CROWNBLOCK
CROWNBLOCK
Manufacturer:
Model:
China,
ТС 125
Load capacity
Number of sheaves::
Drilling line diameter:
Sheave diameter:
Sheave diameter:
125 t
5 шт
28,6 mm
1 unit of 915vv
4 units of 760mm
China
ТС 180
Load capacity
Number of sheaves:
Drilling line diameter:
Sheave diameter
Sheave diameter:
180 t
7
32 mm
915мм- 5units
760мм-1unit
HOOK BLOCK
Manufacturer
Model
Outside diameter of sheaves
Number of sheaves
Load capacity
Compatible with rated weight load and size of derrick
crown block
China,
YG160B
760mm
4
125 t
Compatible with rated weight load and size of derrick
crown block
China,
YG 180
915 мм
5
180 t
Compatible with rated weight load and size of
derrick crown block
SWIVEL
Rated load is compatible with derrick and rotary table
Rated load is compat. with derrick and rotary table
Manufacturer
Model
Static load capacity
Operating pressure
China,
SL-160
160 t
35 MPa
China,
SL-225
225t
35 MPa
Manufacturer
Model
Length
Permissible load
Number of sets
Russia, forged and having sufficient length
ШБД-125
1800 mm
125 t
1 set
Russia, forged and having sufficient length
ШБД-220
1800 мм
220 t
1 set
DERRICK
China,
China,
Type
China,
JJ15836 K-shaped with open front face
125t
China,
JJ18038, Telescopic, 2-section with open front
face
(5х6) 180t
36 m
3х6m
6m
Telescopic hydrocylinders
38 м
3х6м
6м
Telescopic hydrocylinders
According to АРI SPEC 9B.
Line diameter : 28,6mm
According to АРI SPEC 9B.
Line diameter : 32 mm
China,
JZG 20
Max. Line pull- - 200кN
Rope diameter- - 28,6 mm
China,
JZG 34A
Max. Line pull - 280кN
Rope diameter- 32 мм
BAILS
Maximum hook load at line string-up 5х4
Height of derrick (from supporting surface of crownblock)
Size of drilling floor (derrick legs axes)
Height of drilling floor
Derrick erection
DRILLING LINE
DEAD LINE ANCHOR
MANUFACTURER
MODEL
DERRICK FLOOR EQUIPMENT
Russia
Р-560
Mechanic drive
Maximum opening
560mm
Static table load
2500kN
Speed of rotation
0…250 rev/min
Transmission: reduction gear with drive shaft
through air line coupling
ROTARY TABLE
MANUFACTURER
MODEL
Russia
Р-560 with ПКР
Mechanic drive
Maximum opening
560mm
Static table load
250 t
Speed of rotation
0…250 rev/min
Transmission: reduction gear with drive shaft through air
line coupling
BUSHING FOR ROTATION OF KELLY JOINT
Available
Available
Quadrangular kellies, for a main hole of well and small
diameter hole by 2 units of each size.
Kelly saver sub should be of non-rotatable type
Manufacturer: China
Size 140х140 mm and 89х89 mm
Quadrangular kellies, for a main hole of well and
small diameter hole by 2 units of each size.
Kelly saver sub should be of non-rotatable type
Manufacturer: China
Size 140х140 mm and 89х89 mm
China,
Hydraulic
China,
Hydraulic
KELLY JOINT
POWER CYLINDERS FOR UNSCREWING DRILL PIPES
CONNECTIONS
2 complete sets
2 complete sets
2 units of each standard size КМ:
КМ 60-125.
КМ 73-125.
КМ 89 ПН-200.
КМ 114 ПК-250.
2 units of each standard size КМ:
КМ 60-125.
КМ 73-125.
КМ 89 ПН-200.
КМ 114 ПК-250.
DC ELEVATORS
2 units of each standard size КМ:
КМ 89-125 for DC of OD 102mm.
КМ 178-170 for DC of OD 178mm.
2 units of each standard size КМ:
КМ 89-125 for DC of OD 102mm.
КМ 178-170 for DC of OD 178mm.
PRODUCTION STRING ELEVATORS
2 units of each standard size КМ:
КМ 102-125
КМ 114-140
КМ 146-320
КМ 168-320
2 units of each standard size КМ:
КМ 102-125
КМ 114-140
КМ 146-320
КМ 168-320
DRILL PIPE ELEVATORS
DRILL PIPE/ CASING TONGS
АКБ-ZQ203-100 type –For drill pipes ( 89-219mm)
100KN/m
ГКШ-4000 For casing (89-500mm) 33-200 KN/m with
torque gage
АКБ-ZQ203-100 type –For drill pipes ( 89-219mm)
100KN/m
ГКШ-4000 For casing (89-500mm) 33-200 KN/m
with torque gage
POWER SLIPS FOR DRILL PIPES / DRILL COLLARS,
CASINGS
ПКР-560
ПКР-560
DRILL COLLAR SAFETY CLAMPS
Available for all diameters of drill collars
Available for all diameters of drill collars
WEIGHT INDICATOR
PETRO LINE ДЕЛ140-4П
POWER UNIT
Manufactured in the USA
САТ-3412 – 1 unit.
GENERATING UNITS AND ROOM FOR GENERATING
UNITS
Manufacturer : USA
Type: Diesel-electric units
Rated power of motor: 292KW
Number of units
2
Frequency
50 Hz
Voltage
380 V
Total power
584 KW
Additional 125kW reserve diesel enginel-generator
available
FUEL TANKS
Fuel tank
2 х 25m3
PETRO LINE ДЕЛ140-4П
USA
Drawworks drive. Diesel САТ 3408-2 unit.396
кW,
Pump drive. Diesel САТ3412 -2units. 475 кW,
Manufacturer : USA
Type: Diesel-electric units
Rated power of motor: 292KW
Number of units
2
Frequency
50 Hz
Voltage
380 V
Total power
584 KW
Additional 125kW reserve diesel enginel-generator
available
Fuel tank
2 х 25m3
DRILL PIPES
DRILL PIPES WITH OUTER DIAMETER 4 1/2"х 0,362
(114 х 9,19)
GOST Р50278-92
Weight 30,0 kgf/m (wall thickness of 9,19 mm)
Number of joints: 300
Total length : 2500m
Type of connection box and pin З-122
New
Manufacturer: Russia
GOST Р50278-92
Weight 30,0 kgf/m (wall thickness of 9,19 mm)
Number of joints: 300
Total length : 2500m
Type of connection box and pin З-122
New
Manufacturer: Russia
SHORT JOINTS OF DRILL PIPES WITH OUTER
DIAMETER 4 1/2 "
Length – 1,5m – 1
Length – 3m – 1
Length – 4,5m – 1
Length – 1,5m – 1
Length – 3m – 1
Length – 4,5m – 1
DRILL PIPES WITH OUTER DIAMETER
3 1/2" х 0,368 (89 х 9,35)
ТУ 14-161-219-2004
Weith 23,0 kgf/m (wall thickness of 9.35 mm)
Number of joints: 540
Total length: 4500m
Type of connection: З - 86
New
Manufacturer: Russia
ТУ 14-161-219-2004
Weith 23,0 kgf/m (wall thickness of 9.35 mm)
Number of joints: 540
Total length: 4500m
Type of connection: З - 86
New
Manufacturer: Russia
SHORT JOINTS OF DRILLING PIPES WITH OUTER
DIAMETER 3 1/2
Length – 1,5m – 1
Length – 3m – 1
Length – 4,5m – 1
Length – 1,5m – 1
Length – 3m – 1
Length – 4,5m – 1
DRILL COLLARS 8" (203,0)
OD 203mm, ID 80mm.
Weight 214 kgf/m
Type of connection З-171
Total length: 50 м
Keyway
OD 203mm, ID 80mm.
Weight 214 kgf/m
Type of connection З-171
Total length: 50 м
Keyway
DRILL COLLARS 7" (178,0)
OD 178mm, ID 80mm.
Weight 156 kgf/m
Type of connection : З-147.
Total length: 150 м
Keyway
OD 178mm, ID 80mm.
Weight 156 kgf/m
Type of connection : З-147.
Total length: 150 м
Keyway
DRILL COLLARS 4 1/4" (108,0)
OD 108mm, ID 51mm.
Weight 63 kgf/m
Type of connection :З-86.
Total length: 150 м
Keyway
OD 108mm, ID 51mm.
Weight 63 kgf/m
Connection type :З-86.
Total length: 150 м
Keyway
Quantity: 3 units of each size
Detailed specifications are given below:
7 5/8" reg. pin X 6 5/8" reg. box X 1,22 m
7 5/8" X6 5/8" X 1,22 m
6 5/8" reg. pin X 4 1/2" IF box X 1,22 m
6 5/8" X4 1/2" 1.22m
4 1/2" IF pin X 4 1/2" IF box X 1,22 m
4 1/2" 4 1/2" X 1,22 m
3 1/2" IF pin X 2 7/8" IF box X 1,22 m
Quantity: 3 units of each size
Detailed specifications are given below:
7 5/8" reg. pin X 6 5/8" reg. box X 1,22 m
7 5/8" X6 5/8" X 1,22 m
6 5/8" reg. pin X 4 1/2" IF box X 1,22 m
6 5/8" X4 1/2" 1.22m
4 1/2" IF pin X 4 1/2" IF box X 1,22 m
4 1/2" 4 1/2" X 1,22 m
3 1/2" IF pin X 2 7/8" IF box X 1,22 m
CROSSOVER SUBS
BIT SUBS
Delivery of complete sets of API standartized bit subs for
all Contractor’s pipe types. Min length of each sub – 3
feet. Min quantity – 3 units of each size. There is a hole
drilled a for reverse valve.
EQUIPEMENT FOR BITS’ SCREWING ON AND OFF
EQUIPMENT FOR RIH OF CASING AND TUBING
ELEVATORS FOR RIH / PU OF CASING WITH SIDE
LOCK
Quantity: 3 units of each size
Detailed specifications are given below:
7 5/8" reg. box X 7 5/8" reg. box X 0,915 м
7 5/8" X 7 5/8" reg. X 0,915 м
6 5/8" reg. box X 7 5/6" reg. box X 0,915 м
6 5/8" X7 5/8" X 0,915 м
4 1/2" reg. box X 4 1/2" IF box X 0,915 м
4 1/2" X4 1/2" X 0,915 м
3 1/2" reg. box X 3 1/2" IF box X 1,22 м
3 1/2* X3 1/2" X 1,22 м
Quantity: 3 units of each size
Detailed specifications are given below:
7 5/8" reg. box X 7 5/8" reg. box X 0,915 м
7 5/8" X 7 5/8" reg. X 0,915 м
6 5/8" reg. box X 7 5/6" reg. box X 0,915 м
6 5/8" X7 5/8" X 0,915 м
4 1/2" reg. box X 4 1/2" IF box X 0,915 м
4 1/2" X4 1/2" X 0,915 м
3 1/2" reg. box X 3 1/2" IF box X 1,22 м
3 1/2* X3 1/2" X 1,22 м
Available
For bits of 24". 17-1/2", 14-3/4", 12-1/4", 9-7/8", 81/2" and 6"
Available
For bits of 24". 17-1/2", 14-3/4", 12-1/4", 9-7/8",
8-1/2" and 6"
Equipment for loading/unloading, transportation and
RIH of casing is ready and in complete sets. Manual
rotating and hydraulic tongs ГКШ-4000 with the slip
from 89 to 500mm. Manufactured in Russia.
Equipment for loading/unloading, transportation
and RIH of casing is ready and in complete sets.
Manual rotating and hydraulic tongs ГКШ-4000
with the slip from 89 to 500mm. Manufactured in
Russia.
Quantity: 3 units of each standart size
Manufactured in Russia
Model: (elevators of КМ type)
Casing size (inches): from 16 ¾ " to 7"
Rated load capacity, t
16 ¾ "
148t:
12 ¾ "
148t:
9 5/8 "
302t:
7"
220t:
Quantity: 3 units of each standart size
Manufactured in Russia
Model: (elevators of КМ type)
Casing size (inches): from 16 ¾ " to 7"
Rated load capacity, t
16 ¾ "
148t:
12 ¾ "
148t:
9 5/8 "
302t:
7"
220t:
POWER SLIPS
ПКР-560
ПКР-560
CASING AND TUBING GAGE
Available
1 set for each standard size of casings
Available
1 set for each standard size of casings
CASING THREAD PROTECTOR
Available
Available
Mud pump 8Т-650, including spare parts
Capacity -475kW; max pressure – 32MPA;
dimensions -4500 х 2000 х 1500мм; weight-12,5t.-2
units.
Mud pump 8Т-650, including spare parts
Capacity -475kW; max pressure – 32MPA;
dimensions -4500 х 2000 х 1500мм; weight-12,5t
DRILLING MUD CIRCULATION SYSTEM
MUD PUMPS
MUD TANKS
Number of mud tanks (including treatment unit): 4
Net volume of drilling mud: not less than 270 м3
Volume of tanks for liquid chemical agents:3 m3
Number of mud tanks (including treatment unit): 4
Net volume of drilling mud: not less than 270 м3
Volume of tanks for liquid chemical agents:3 m3
WATER TANKS
Water tank volume: 140 m3
Water tank volume: 140 m3
SHALE SHAKERS
Quantity: 2 sets
Manufacturer: Russia
Model: СВ1-Л
Productivity 0,045м3 /sec
Quantity: 2 sets
Manufacturer: Russia
Model: СВ1-Л
Productivity 113м3 /час
HYDROCYCLONE
Quantity: 1 sets
Manufacturer: Russia
Model ГЦК – 360
Delivery pump capacity:
Productivity 65 м3/hr
Quantity: 1 sets
Manufacturer: Russia
Model ГЦК – 360
Delivery pump capacity:
Productivity 65 м3/hr
55 kW
55 kW
DESILTER
Manufacturer: Russia
Model: ИГ45м
Delivery pump capacity: 55 kW
Productivity 45 м3/hr
Manufacturer: Russia
Model: ИГ45м
Delivery pump capacity: 55 kW
Productivity 45 м3/hr
CENTRIFUGE
Manufacturer: Russia
Model: ОГШ 511
Productivity 45 м3/hr
Manufacturer: Russia
Model: ОГШ 511
Productivity 45 м3/hr
MIXERS
Manufacturer: Russia
Mechanic ПМ-875
Hydraulic Р= 6,4 MPAа, 1 unit
Manufacturer: Russia
Mechanic type ПМ875 -5 units
Hydraulic Р= 6,4 MPa, 15 units
GAS SEPARATOR FOR DRILLING MUD
Gas Separator-settler:
Manufacturer: Russia
Gas Separator-settler:
Manufacturer: Russia
HORIZONTAL VACUUM GAS SEPARATOR
VERTICALLY INSTALLED IN DERRICK vacuum
gas separator
Manufacturer: USA, Model: DERRICK, VACU-FLO
1200, Capacity: 272m3 /hour
VERTICALLY INSTALLED IN DERRICK vacuum
gas separator
Manufacturer: Russia
Model: КАСКАД - 40 .
Productivity: 40м3 /hr
PRESSURE MANIFOLD (STANDPIPE )
HIGH PRESSURE MUD LINES
MUD HOSE
FISHING TOOLS
REVERSE CIRCULATION JUNK BASKET
JUNK MILLS
Operating pressure (psi): 5000
Operating pressure (psi): 5000
Operating pressure 5000 psi.
Operating pressure 5000 psi.
Manufacturers : China Khongkhua
Operating pressure: 5000 psi
Manufacturers : Khongkhua
Operating pressure: 5000 psi
Made in Russia :
Spears
per ТУ 39-01-10-494-79
Nonreleasing spears
ТУ 26-16-22-77
Releasing spears
ТУ 39-01-10-716-81
Segment –type grapple ТУ 26-02-221-75
Die collars
DОСТ 8565-81
Fishing taps
DОСТ 8483-81
Mills
6-16-60-70 , ТУ 26-16-63-78
Pilot mills
ОСТ 26-16-1623-82
Bottom hole mills
ОСТ 26-02-233-70
Cutting and grinding mills ОСТ 26-02-1296-75
Impression blocks
ТУ 26-16-102-79
Contractor will provide a complete range of fishing
tools and devices to fish any well equipment of
Contractor.
Made in Russia :
Spears
per ТУ 39-01-10-494-79
Nonreleasing spears
ТУ 26-16-22-77
Releasing spears
ТУ 39-01-10-716-81
Segment –type grapple ТУ 26-02-221-75
Die collars
DОСТ 8565-81
Fishing taps
DОСТ 8483-81
Mills
6-16-60-70 , ТУ 26-16-63-78
Pilot mills
ОСТ 26-16-1623-82
Bottom hole mills
ОСТ 26-02-233-70
Cutting and grinding mills ОСТ 26-02-1296-75
Impression blocks
ТУ 26-16-102-79
Contractor will provide a complete range of fishing
tools and devices to fish any well equipment of
Contractor.
Manufacturer: Russia
Number: 1 of each type for each size of well according
to the specifications.
Manufacturer: Russia
Number: 1 of each type for each size of well
according to the specifications.
Manufacturer: Russia
Number: 1 of each type for each size of well according
to the specifications
Manufacturer: Russia
Number: 1 of each type for each size of well
according to the specifications
OVERSHOT
Number : one unit of each type
Manufacturer and Model: Russia
Type: LT143, LT206, LT245, LT273
Outside diameter of the body (inches): 5-7/8",8-1/8"(9W8\10-3/4"
Outside diameter of the wall hook (inches): 15",12"
Length of the extension sub (inches): 3 feet
Top sub connection: NC38, NC50, 4 ½, IF 5-1/2FH, 7
1/2"
Diameter of fishing jobs target (spiral thread) (inches):
+3 1/2" 4-3/4", +5" 6 1/2" 6 5/8" 6 3/4" 7", +7 3/4" 8", 9".
Max. diameter of fishing jobs target (junk basket)
(inches) 4-1/2", 5-1/2", 7-1/2", 7-7/8".
Number : one unit of each type
Manufacturer and Model: Russia
Type: LT143, LT206, LT245, LT273
Outside diameter of the body (inches): 5-7/8",81/8"(9-W8\10-3/4"
Outside diameter of the wall hook (inches):
15",12"
Length of the extension sub (inches): 3 feet
Top sub connection: NC38, NC50, 4 ½, IF 51/2FH, 7 1/2"
Diameter of fishing jobs target (spiral thread)
(inches):
+3 1/2" 4-3/4", +5" 6 1/2" 6 5/8" 6 3/4" 7", +7 3/4"
8", 9".
Max. diameter of fishing jobs target (junk basket)
(inches) 4-1/2", 5-1/2", 7-1/2", 7-7/8".
JUNK SUB (BOOT BASKET)
Manufacturer и Model: Russia
Number: 1 of each type for each size of well according
to the specifications
Manufacturer и Model: Russia
Number: 1 of each type for each size of well
according to the specifications
SAFETY JOINT
Manufacturer: Russia
Safety joints of each type with 4-1/2" IF box X pin
complete with guide thread connection (for unscrewing)
Manufacturer: Russia
Safety joints 2 units of each type with 4-1/2" IF
box X pin complete with guide thread connection
(for unscrewing)
FISHING MAGNET
Manufacturer: Russia
Well sizes: 17-1/2", 14-3/4", 12-1/4", 9-7/8", 8-1/2"
Manufacturer: Russia
Well sizes: 17-1/2", 14-3/4", 12-1/4", 9-7/8", 8-1/2"
IMPRESSION BLOCKS
Manufacturer: Russia, Type of impression blocks - lead,
one for each size of well
Manufacturer: Russia, Type of impression blocks
- lead, one for each size of well
DITCH MAGNET
To catch metal grit, which come through flow lines
Made in Russia
To catch metal grit, which come through flow lines
Made in Russia
HYDRAULIC RELEASING SUB FOR FISHING JOBS
Manufacturer: Russia
Model:
KXJ80
Connection:
6.5/8R
Manufacturer: Russia
Model:
KXJ80
Connection:
6.5/8R
KXJ62
NC46
KXJ62
NC46
CASING SPEAR
Made in Russia
for all casing sizes to be used
Made in Russia
for all casing sizes to be used
BLOWOUT PREVENTOR EQUIPMENT
According to well drilling project
Manufacturer: Russia
Universal hydraulic blowout preventer
Kill manifold - 1set
Separator unit - 1set
Pipes - 1set
Master panel - 1set
Auxiliary console - 1set
Manifold - 1set
Choke manifold - 1set
Manufacturer: Russia
Universal hydraulic blowout preventer
Kill manifold - 1set
Separator unit - 1set
Pipes - 1set
Master panel - 1set
Auxiliary console - 1set
Manifold - 1set
Choke manifold - 1set
All metering devices on the drilling rig, regardless
of their position on the drilling rig platform, are
explosion-proof. PETROLINE system is installed.
DRILLING RIG INSTRUMENTATION
Depending on well type and client’s requirements
Drilling parameters deviations’ metering device
Depending on well type and client’s requirements
EQUIPMENT FOR WELDING AND METAL CUTTING
AC Transformer . Gas cutter
AC Transformer . Gas cutter
Manufacturer: Russia
Model includes 2units of Screw compressors ДЭН45,
with productivity of 7,5 m3./min. under pressure of
1MPa
Buffer air collector: 2units х2м3
Manufacturer: Russia
Model includes 2units of Screw compressors
ДЭН45, with productivity of 7,5 m3./min. under
pressure of 1MPa
Buffer air collector: 2units х2м3
DRILLING MUD CONTROL
OFFIL Laboratory
OFFIL Laboratory
VERTICAL SLUDGE PUMP
Manufacturer: Russia
Model:
ВШН – 150 -1UNIT
Capacity 150 m3/hour
Electric motor АО 2-7 2-4. Power: 30 kW
Manufacturer: Russia
Model:
ВШН – 150 -1UNIT
Capacity 150 m3/hour
Electric motor АО 2-7 2-4. Power: 30 kW
AIR COMPRESSORS
DRILL WATER TRANSFER PUMP
Manufacturer: China
Model: VICTORY.
Capacity 200 m3/hour
Power: 55kW
Manufacturer: China
Model: VICTORY.
Capacity 200 m3/hour
Power: 55kW
RETURN WATER PUMP
Manufacturer: Russia
Model:
НБ-32
Power:
10kW
Manufacturer: Russia
Model:
НБ-32
Power:
10kW
PIPE RACK
Length-38 м
Hight-1070мм
Width-1200мм
5 racks with protective shield
Length-38 м
Hight-1070мм
Width-1200мм
5 racks with protective shield
Manufacturer: Russia. Type: box type
Overall dimensions: 15855мм X 1070мм X2288м м
Permissible load: for drill pipes and Drill Collars
Manufacturer: Russia. Type: box type
Overall dimensions: 15855мм X 1070мм
X2288м м
Permissible load: for drill pipes and Drill Collars
DERRICK LADDER
Manufacturer: Russia
Tunnel ladder type with gangways
Manufacturer: Russia
Tunnel ladder type with gangways
RAILING
Manufacturer: Russia
Height 1,25m
Manufacturer: Russia
Height 1,25m
VERTICAL SLUDGE PUMP
Manufacturer: Russia. Model; ВШН - 150
power: 30 kW . Capacity 150 m3/hour
Manufacturer: Russia. Model; ВШН - 150
power: 30 kW . Capacity 150 m3/hour
Manufacturer: Russia
Type: Mechanical
Manufacturer: Russia
Type: Mechanical
CATWALK
Equipped with ladders, solid floor, dismountable, the height
is in accordance with pipe parameters
DRILL LINE SPOOLER
DRILLING RIG HAND TOOLS
A complete range of hand tools, which includes, but not
limited to, striking wrenches for all BOP equipment of the
Contractors, mud pumps, etc., a complete range of tongs
from 56" and up to 8", a complete range of tongs and socket
wrenches of metric and imperial sizes from 3/8" up to 2",
complete set of couplings 3/4" with couplings up to 2" in
diameter, complete range of couplings 3/8" with couplings up
to 1-1/4", pneumatic or hydraulic impact wrench with a
complete set of heads, extensions, universal joints, etc.;
suitable for BOP equipment of the Contractors, mud
pumps, etc. Manually –operated angle grinders, hacksaws,
sledge hammers, ball peen hammers, power hammers,
perforators, bits, screwdrivers, hydraulic cable cutter, bench
vise, chain vise, chain tongs from 56" up to 24" and manually
operated and pneumatic pipe cutters for cold cut of casings
13-3/8", 10-3/4", 9-5/8"in diameter.
A complete range of hand tools, which includes, but not
limited to, striking wrenches for all BOP equipment of
the Contractors, mud pumps, etc., a complete range of
tongs from 56" and up to 8", a complete range of tongs
and socket wrenches of metric and imperial sizes from
3/8" up to 2", complete set of couplings 3/4" with
couplings up to 2" in diameter, complete range of
couplings 3/8" with couplings up to 1-1/4", pneumatic or
hydraulic impact wrench with a complete set of heads,
extensions, universal joints, etc.; suitable for BOP
equipment of the Contractors, mud pumps, etc.
Manually –operated angle grinders, hacksaws, sledge
hammers, ball peen hammers, power hammers,
perforators, bits, screwdrivers, hydraulic cable cutter,
bench vise, chain vise, chain tongs from 56" up to 24"
and manually operated and pneumatic pipe cutters for
cold cut of casings 13-3/8", 10-3/4", 9-5/8"in diameter.
SAFETY FACILITIES AND FIRE-FIGHTING EQUIPMENT
Fire hydrant, fire hoses, fire extinguishers, hooks, buckets,
crows
Fire hydrant, fire hoses, fire extinguishers, hooks,
buckets, crows
STAND ALONE BREATHING APPARATUSES
Isolated gas masks
Isolated gas masks
FIRE EXTINGUISHERS
Number: 30Type : СО2, powder-type fire extinguisher, other
types Location: At the working places and on the derrick
base
Number: 30Type : СО2, powder-type fire extinguisher,
other types Location: At the working places and on the
derrick base
EYEWASH AREAS
Manufacturer: Russia Field hospital
Manufacturer: Russia Field hospital
PERSONAL PROTECTIVE EQUIPMENT FOR PEOPLE
WORKING INSIDE OF DRILLING RIG
Work clothes, safety glasses, hard hats, aprons
Work clothes, safety glasses, hard hats, aprons
ANTI-SKID SYSTEM FOR DRILLING RIG FLOOR
Manufacturer: China
Manufacturer: China
WARNING SIGNS
According to the hazardous factors at the Drilling Rig
According to the hazardous factors at the Drilling Rig
22 buildings equipped with facilities
22 buildings equipped with facilities
3 blocks kitchen and canteens
1 drilling foreman’s office and bedroom
1 meetings’ block
1 sauna block
1 supervisor office block
1 medical and relaxation block.
8 bedroom blocks
2 contractors’ blocks
1 hand tools storage block
1 chemicals’ storage block блок для хранения
хим.реагентов
2 drying blocks
3 blocks kitchen and canteens
1 drilling foreman’s office and bedroom
1 meetings’ block
1 sauna block
1 supervisor office block
1 medical and relaxation block.
8 bedroom blocks
2 contractors’ blocks
1 hand tools storage block
1 chemicals’ storage block блок для хранения
хим.реагентов
2 drying blocks
ACCOMMODATION BUILDINGS AND CANTEENS
CAMP ON DRILLING SITE
DESCRIPTION OF EQUIPMENT
SPECIFICATIONS
DRILLING RIG – GENERAL SPECIFICATIONS
ZJ50DBS
ZJ70DBS
Name and Serial Number of Drilling Rig.
Year and place of manufacture
Manufacturer
Drive
Arrangement of drive
Depth of drilling with 114-mm drill pipes
ZJ50 DBS
2007 , China
China,
Diesel-electric
Separate table drive
4500 m
ZJ70 DBS
2007 , China
China,
Diesel-electirc
Separate table drive
7000 м
HOISTING EQUIPMENT
Top drive TDS 9SA VARCO
DRAWWORKS
Manufacturer
Model, type
Drive
Rated input
Power supplied to drawworks
Load capacity at line string-up 6х 7
Main brake
Auxiliary brake
China,
C50DB-02 , single stage of speed regulation
Electric (AC with frequency regulation)
1400 kW
1400 kW
315 m(3150kN)
Oil disk brake (regenerative with heat removing)
Auxiliary drive unit with power of 45кW for emergency
control and autodrilling
China,
JC70DB, single stage of speed regulation
Electric (AC with frequency regulation)
2000 kW
2000 kW
450т (4500кN)
Hydraulic disk brake (regenerative with heat
removing)
Auxiliary drive unit with power of 45кW for
emergency control and autodrilling
CROWNBLOCK
Manufacturer:
Model:
China,
ТС 350
Load capacity
Number of sheaves:
Sheave diameter:
Drilling line diameter:
Fast crownblock sheave
350 t
6 units
1270mm
35 mm
1524mm
China
ТС 450
Load capacity
450 т
Number of sheaves:
6
Sheave diameter:
1524мм
Drilling line diameter: 38 мм
HOOK BLOCK
China,
DG 450
1524мм
7
450t
Compatible with rated weight load and size of
derrick crown block
Manufacturer
Model
Outside diameter of sheaves
Number of sheaves
Load capacity
Compatible with rated weight load and size of derrick
crown block
China,
DG 315
1270 mm
7
315 t
Compatible with rated weight load and size of derrick
crown block
SWIVEL
Rated load is compatible with derrick and rotary table
Rated load is compatible with derrick and rotary
table
Manufacturer
Model
Static load capacity
Operating pressure
China,
SL-315-5
315 t
35 MPa
China,
SL-450-5
450 t
35 MPa
Manufacturer
Model
Length
Permissible load
Number of sets
Russia, forged and having sufficient length
ШБУ-320
1300 mm
320 t
1 set
Russia, forged and having sufficient length
ШБУ-320
1300 мм
320 т
1 set
DERRICK
China,
China,
Type
Maximum hook load at line string-up 6х7
Height of derrick (from supporting surface of crownblock)
Size of drilling floor (derrick legs axes)
Height of drilling floor
Derrick erection
JJ315/45-К , K-shaped with open front face
315 t
45 m
12х11 m
9m
Main drawworks (auxiliary drive)
JJ450/45-К
K-shaped no tensed line
450т
45 м
12х10,13м
9м
Main drawworks (auxiliary drive)
TOP DRIVE SYSTEM
VARCO TDS-9SA
Max. torque -62,4kNm
Rated. torque -32~43 kNm at 114 rev/min
VARCO TDS-11SA
Max. torque -62,4кNм
Rated. torque -32~43кNм at 114 rev/min
DRILLING LINE
According to АРI SPEC 9B.
Line diameter : 35 mm
According to АРI SPEC 7К.
Line diameter : 38 мм
China,
JZG 34A
Max. Line pull- 340kN
Rope diameter- 35 mm
China,
JZG 34A
Max. Line pull - 340кN
Rope diameter - 38 мм
BAILS
DEAD LINE ANCHOR
MANUFACTURER
MODEL
DERRICK FLOOR EQUIPMENT
ROTARY TABLE
MANUFACTURER
MODEL
China,
ZP375
electric drive
Maximum opening
952,5mm
Static table load
585 t
Speed of rotation 0…300 rev/min
Transmission: reduction gear with drive shaft through air
line coupling
BUSHING FOR ROTATION OF KELLY JOINT
Available
KELLY JOINT
Quadrangular kellies, for a main hole of well and small
diameter hole by 2 units of each size.
Kelly saver sub should be of non-rotatable type
Manufacturer: China
Size 140х140 mm and 89х89 mm
Quadrangular kellies, for a main hole of well and
small diameter hole by 2 units of each size.
Kelly saver sub should be of non-rotatable type
Manufacturer: China
Size 140х140 mm and 89х89 mm
POWER CYLINDERS FOR UNSCREWING DRILL PIPES
CONNECTIONS
China,
Hydraulic
China,
Hydraulic
DRILL PIPE ELEVATORS
2 units of each standard size
Size 3 ½"
Rated load capacity 247 t
Size 5”
2 units of each standard size КМ:
КМ 127 ПК-250.
КМ 89 ПН-200.
КМ 60 ПН-125.
DC ELEVATORS
2 units of each standard size
Size 9 ½ "
Rated load capacity 148 t
Size 8"
Rated load capacity 148 t
Size 7"
Rated load capacity 99 t
2 units of each standard size КМ:
КМ 89-125 for DC with OD 89мм.
КМ 146-170 for DC with OD 178мм.
КМ 178-170 for DC with OD 203мм.
PRODUCTION STRING ELEVATORS
For DC with OD 9 ½ " - 3 units
Connection 8" Reg
For DC with OD 8 " - 4 units
Connection 7" Reg
For DC with OD 7 " – 6 units
Connection 5 ½ " Reg
2 units of each standard size КМ:
КМ 146-320
КМ 168-320
China,
ZP375
electric drive
Maximum opening
952,5мм
Static table load
585 т
Speed of rotation
0…300 rev/min
Transmission: reduction gear with drive shaft
through air line coupling
Available
2 complete sets
2 complete sets
АКБ-ZQ203-100 type –For drill pipes ( 89-219mm)
100KN/m
ГКШ-4000 For casing (89-500mm) 33-200 KN/m
with torque gage
АКБ-ZQ203-100 type –For drill pipes ( 89-219мм)
100КN/м
ГКШ-4000 type –For drill pipes (89-500мм) 33200 КN/м
with torque gauge
POWER SLIPS FOR DRILL PIPES / DRILL COLLARS,
CASINGS
Pneumatic spider Load capacity 350 t
Slips DCS –R4 1/2"-6 ",6 ¾ "8 1/4 ",13 5/8"
Pneumatic spider Г/П350тt
Slips DCS –R4 1/2"-6 ",6 ¾ "8 1/4 ",13 5/8"
DRILL COLLAR SAFETY CLAMPS
Available for all diameters of drill collars
Available for all diameters of drill collars
WEIGHT INDICATOR
МD ТОТСО
МD ТОТСО
POWER UNIT
China,
Drawworks drive. Electric motor YJ23 -2un. 600 кW,
600V
Rotor Drive. Electric motor YJ23 -1unit.600 кW, 600V
Pump drive. Electric motor YJ31 -2units.1200 кW,
600V. USA. Top drive 2 units х245кW 690V
China,
Drawworks drive. Electric motor YJ31 -2, .970 кW,
600V
Rotor Drive. Electric motor YJ23 -1.600 кW, 600V
Pump drive. Electric motor YJ31 -3.1200 кW, 600V
USA
Top drive 2units х245кW 600V
GENERATING UNITS AND ROOM FOR GENERATING UNITS
Manufacturer : USA
Type: Diesel-electric units
Rated power of motor: 1020 kW
Number of units
3
Frequency
50 Hz
Voltage :
600 V
Total power:
3060 kW
One room in nearderrick structure
Manufacturer : USA
Type: Diesel-electric units
Rated power of motor: 1020 kW
Number of units
4 units
Frequency:
50 Hz
Voltage:
600 V
Total power::
4080 kW
One room in near derrick structure
FUEL TANKS
Fuel tank
.
FUEL TANKS 6 х 50м3
DRILL PIPE/ CASING TONGS
2 х 50m3
DRILL PIPES
DRILL PIPES WITH OUTER DIAMETER 5"х 0,362 (127 х
9,19)
Category G-105
Weight 30,0 kgf/m
Number of connections: 430
Total length: 4500 m
Type of connection NC 50 (4 ½" IF)
API Classification: Premium, Range 2
Manufacturer: China
GOST Р 50278-92
Weight 30,0 kgf/м (wall thickness of 9,19 мм)
Number of connections: 500.
Total length : 6000м
Type of connection GOST 27834-95 box and pin
З-133
New
Manufacturer: Russia
SHORT JOINTS OF DRILL PIPES WITH OUTER
DIAMETER 5
Length– 1,5 m – 1 unit
Length– 3 m – 1 unit
Length– 4,5 m – 1 unit
Length – 1,5 м – 1
Length – 3 м – 1
Length – 4,5 м – 1
Category G-105
Weight 23 kgf/m
Number of connections: 430
Total Length(m): 4500 m
Type of connection NC 38 (3 ½" IF)
API Classification: Premium, Range 2
Manufacturer: China
ТУ 14-1571-88
Weight 23,0 kgf/м (wall thickness of 9.35 мм)
Number of connections: 732шт
Total length (м): 6000м
Type of connection : З - 102
box and pin: ЗП-127-59
New
Manufacturer: Russia
SHORT JOINTS OF DRILLING PIPES WITH OUTER
DIAMETER 3 1/2
Length– 1,5 m – 1 unit
Length– 3 m – 1 unit
Length– 4,5 m – 1 unit
Length – 1,5 м – 1
Length – 3 м – 1
Length – 4,5 м – 1
DRILL COLLARS (DC) 9 1/2" (241,3)
OD 9 1/2", ID 2 13/16"
Weight 327,4 kgf/m
Type of connection 7 5/8" REG
Total length: 25 m
Spiral - corrugated
Keyway
DRILL COLLARS (DC) 8" (203,0)
OD 8", ID 3 1/7"
Weight 240 kgf/m
Type of connection 6 5/8" REG
Total length: 50 m
Spiral - corrugated
Keyway
OD 203мм, ID 80мм.
Weight 214 kgf/м
Type of connection З-171
Total length: 50 м
Spiral - corrugated
Keyway
DRILL COLLARS (DC) 7" (178,0)
OD 7", ID 2 13/16"
Weight 150 kgf/m
Type of connection 4" IF
Total length: 150 m
Spiral - corrugated
Keyway
OD 178мм, ID 80мм.
Weight 156 кгс/м
Type of connection:З-147.
Total length: 150 м
Spiral - corrugated
Keyway
CROSSOVER SUBS
Number : 3 units of each
Detailed description is below:
7 5/8" reg. pin X 6 5/8" reg. box X 1,22 m
7 5/8" X6 5/8" X 1,22 m
6 5/8" reg. pin X 4 1/2" IF box X 1,22 m
6 5/8" X4 1/2" 1.22m
4 1/2" IF pin X 4 1/2" IF box X 1,22 m
4 1/2" 4 1/2" X 1,22 m
3 1/2" IF pin X 2 7/8" IF box X 1,22 m
Quantity: 3 units of each size
Detailed specifications are given below:
7 5/8" reg. pin X 7 5/8" reg. pin X 0,915 м
7 5/8" X 7 5/8" reg. X 0,915 м
6 5/8" reg. pin X 7 5/6" reg. pin X 0,915 м
6 5/8" X7 5/8" X 0,915 м
4 1/2" reg. pin X 4 1/2" IF box X 0,915 м
4 1/2" X4 1/2" X 0,915 м
3 1/2" reg. pin X 3 1/2" IF box X 1,22 м
3 1/2* X3 1/2" X 1,22 м
DRILL PIPES WITH OUTER DIAMETER
3 1/2" х 0,368 (89 х 9,35)
POWER SLIPS
Air-operated spider, load capacity 350t
Slips DCS –R4 1/2"-6 ",6 ¾ "8 1/4 ",13 5/8"
Air-operated spider, load capacity 350t
Slips DCS –R4 1/2"-6 ",6 ¾ "8 1/4 ",13 5/8"
CASING AND TUBING GAGE
Available
1 set for each standard size of casings
Available
1 set for each casing standard size
CASING THREAD PROTECTOR
Available
Available
MUD PUMPS
Mud pump F-1600, including spare parts
Power -1176kW; max. pressure - 34,3MPa; max. delivery 50,42l/sec; dimensions-7500 х 2800 х 2688mm; weight-38t
Mud pump F-1600, including spare parts
Capacity -1176kW; max pressure - 34,3МПа; max.
delivery - 50,42 l/sec; dimensions-7500 х 2800 х
2688мм; weight-38t.-2units
MUD TANKS
Number of mud tanks (including treatment unit) : 6 .
Net volume of drilling mud: not less than 370 m3
Volume of tanks for liquid chemical agents:3 m3
DRILLING MUD CIRCULATION SYSTEM
м3
Number of mud tanks (including treatment unit): 6.
Net volume of drilling mud: not less than 480 м3
Volume of tanks for liquid chemical agents:3
Water tank volume: 140 м3
WATER TANKS
Water tank volume: 140 m3
SHALE SHAKERS
Number : 3 sets
Manufacturer: DERRICK, USA
Model: FLO-LINE -2000-3
Capacity: 113m3 /hour
Quantity: 3 sets
Manufacturer: DERRICK, USA
Model: FLO-LINE -2000-3
Productivity 113м3 /hr
HYDROCYCLONE
Number 1 set
Manufacturer: DERRICK, USA
Model DSV-10-3
Delivery pump power: 55 kW
Capacity: 65 m3/hour
Quantity: 1 комплект
Manufacturer: DERRICK, США
Model DSV-10-3
Delivery pump power: 55 kW
Productivity 65 м3/hr
DESILTER
Manufacturer: DERRICK, USA . Model: S 416-S
Delivery pump power: 55 kW
Capacity: 45 m3/hour
Manufacturer: DERRICK, USA
Model: S 416-S
Delivery pump power: 55 kW
Productivity 45 м3/hr
CENTRIFUGE
Manufacturer: DERRICK, USA
Model: DE 1000, Capacity: 45 m3/hour
Manufacturer: DERRICK, USA
Модель: LW450х1000
Productivity 45 м3/hr
Manufacturer: China
MIXERS
Manufacturer: China
Mechanical NJ 15 un. Hydraulic Р= 6,4 MPa, 15 units
GAS SEPARATOR FOR DRILLING MUD
Gas Separator-settler:
Manufacturer: China
HORIZONTAL VACUUM GAS SEPARATOR
VERTICALLY INSTALLED IN DERRICK vacuum gas
separator
Manufacturer: USA, Model: DERRICK, VACU-FLO 1200,
Mechanical NJ15 -12units
Mechanical NJ5,5 -1unit
Hydraulic Р= 6,4 MPa, 9units
Gas Separator-settler:
Manufacturer: China
VERTICALLY INSTALLED IN DERRICK vacuum gas
separator
Manufacturer: USA
PRESSURE MANIFOLD (STANDPIPE )
Operating pressure (psi): 5000
Operating pressure (psi): 5000
HIGH PRESSURE MUD LINES
Operating pressure 5000 psi, a separate line from
each pump to pressure manifold of standpipe on the
drill floor should be provided – totally two lines all the
way from the mud pumps to the drill floor
Operating pressure 5000 psi, a separate line from
each pump to pressure manifold of standpipe on
the drill floor should be provided – totally two lines
all the way from the mud pumps to the drill floor
MUD HOSE
Manufacturers : China
Operating pressure: 5000 psi
Manufacturers : China
Operating pressure: 5000 psi
CEMENTING STANDPIPE
Connected to the standpipe manifold on the drill floor,
minimum 2 shut-off valves and 2 outlets for indicators
with shut-off valves. Available Р -10000 psi
Connected to the standpipe manifold on the drill
floor, minimum 2 shut-off valves and 2 outlets for
indicators with shut-off valves. Available Р -10000
psi
FLEXIBLE HOSE FOR CEMENTING
1 set with inner diameter 2" x 10000 psi.
shut-off valves and plug valves complete with hinged
joints Style 50. Operating pressure (psi): 10000.
Independent cementing line and line which passes
under the floor , to release pressure in a standpipe
1 set with inner diameter 2" x 10000 psi.
shut-off valves and plug valves complete with
hinged joints Style 50. Operating pressure (psi):
10000. Independent cementing line and line which
passes under the floor , to release pressure in a
standpipe
FISHING TOOLS
Made in Russia :
Spears
per ТУ 39-01-10-494-79
Nonreleasing spears
ТУ 26-16-22-77
Releasing spears
ТУ 39-01-10-716-81
Segment –type grapple ТУ 26-02-221-75
Die collars
DОСТ 8565-81
Fishing taps
DОСТ 8483-81
Mills
6-16-60-70 , ТУ 26-16-63-78
Pilot mills
ОСТ 26-16-1623-82
Bottom hole mills
ОСТ 26-02-233-70
Cutting and grinding mills ОСТ 26-02-1296-75
Impression blocks
ТУ 26-16-102-79
Contractor will provide a complete range of fishing
tools and attachments to fish any well equipment of
Contractor.
Made in Russia :
Spears ТУ 39-01-10-494-79
Nonreleasing spears
ТУ 26-16-22-77
Releasing spears
ТУ 39-01-10-716-81
Segment –type grapple ТУ 26-02-221-75
Die collars
ГОСТ 8565-81
Fishing taps
ГОСТ 8483-81
Mills
ТУ 26-16-60-70 , ТУ 26-1663-78
Pilot mills
ОСТ 26-16-1623-82
Bottom hole mills
ОСТ 26-02-233-70
Cutting and grinding mills ОСТ 26-02-1296-75
Impression blocks
ТУ 26-16-102-79
Contractor will provide a complete range of fishing
tools and devices to fish any well equipment of
Contractor.
REVERSE CIRCULATION JUNK BASKET
Manufacturer: Russia
Number: 1 of each type for each size of well according
to the specifications.
Manufacturer: Russia
Number: 1 of each type for each size of well
according to the specifications.
OVERSHOT
Number : one unit of each type
Manufacturer and Model: Russia
Type: LT143, LT206, LT245, LT273
Outside diameter of the body (inches): 5-7/8",8-1/8"(9W8\10-3/4"
Outside diameter of the wall hook (inches): 15",12"
Length of the extension sub (inches): 3 feet
Top sub connection: NC38, NC50, 4 ½, IF 5-1/2FH, 7
1/2"
Diameter of fishing jobs target (spiral thread) (inches):
+3 1/2" 4-3/4", +5" 6 1/2" 6 5/8" 6 3/4" 7", +7 3/4" 8", 9".
Max. diameter of fishing jobs target (junk basket)
(inches) 4-1/2", 5-1/2", 7-1/2", 7-7/8".
Number : one unit of each type
Manufacturer and Model: Russia
Type:ТНС
Outside diameter of the body (inches): from
140мм to 245мм
Top sub connection: З-86,З-133,З-147
Diameter of fishing jobs target (spiral thread)
(inches): from 89
to 168мм
JUNK MILLS
Manufacturer: Russia
Number: 1 of each type for each size of well according
to the specifications
Manufacturer: Russia
Number: 1 of each type for each size of well
according to the specifications
JUNK SUB (BOOT BASKET)
Manufacturer и Model: Russia
Number: 1 of each type for each size of well according
to the specifications
Manufacturer and Model: Russia
Number: 1 of each type for each size of well
according to the specifications
Manufacturer: Russia
Type:БП and БРП1
Safety joints 2 units of each type with IF box X
pin complete with guide thread connection (for
unscrewing)
SAFETY JOINT
Manufacturer: Russia
Safety joints of each type with 4-1/2" IF box X pin
complete with guide thread connection (for unscrewing)
FISHING MAGNET
Manufacturer: Russia
Well sizes: 17-1/2", 14-3/4", 12-1/4", 9-7/8", 8-1/2"
Manufacturer: Russia
Well sizes: from 142,9 to 295,3мм
IMPRESSION BLOCKS
Manufacturer: Russia, Type of impression blocks - lead,
one for each size of well
Manufacturer: Russia, Type of impression blocks
- lead, one for each size of well
DITCH MAGNET
To catch metal grit, which come through flow lines
Made in Russia
To catch metal grit, which come through flow lines
Made in Russia
HYDRAULIC RELEASING SUB FOR FISHING JOBS
Manufacturer: Russia
Model:
KXJ80
Connection:
6.5/8R
Manufacturer: Russia
Model:
KXJ80
Connection:
6.5/8R
KXJ62
NC46
KXJ62
NC46
CASING SPEAR
Made in Russia
for all casing sizes to be used
Made in Russia
for all casing sizes to be used
BLOWOUT PREVENTOR EQUIPMENT
According to well drilling project
Manufacturer: China
Universal hydraulic blowout preventer
Shear rams -1 set
Kill manifold - 1set
Separator unit - 1set
Pipes - 1set
Master panel - 1set
Auxiliary console - 1set
Manifold - 1set
Choke manifold - 1set
Manufacturer: China
Universal hydraulic blowout preventer
Shear rams -1 set
Kill manifold - 1set
Separator unit - 1set
Pipes - 1set
Master panel - 1set
Auxiliary console - 1set
Manifold - 1set
Choke manifold - 1set
DRILLING RIG INSTRUMENTATION
All the drilling rig instrumentation, irrespective of its
location on the drilling platform, is explosion –proof.
MD ТОТСО system is installed to allow the information
to be transmitted over a distance
All the drilling rig instrumentation, irrespective of its
location on the drilling platform, is explosion –proof.
MD ТОТСО system is installed to allow the
information to be transmitted over a distance
DRILLER’S CABIN AND REST AREA
Driller’s cabin includes:
Drilling instrumentation, digital system, control panel,
monitor, computers, video surveillance cameras and
explosion-proof conditioner etc. Behind the cabin there
is a rest area, which includes: conditioner, eyewash
area, table, chair, etc.
Driller’s cabin includes:
Drilling instrumentation, digital system, control
panel, monitor, computers, video surveillance
cameras and explosion-proof conditioner etc.
Behind the cabin there is a rest area, which
includes: conditioner, eyewash area, table, chair,
etc.
Drilling parameters deviations’ metering device
Depending on well type and client’s requirements
DRILLING MUD PIT LEVEL INDICATOR
Manufacturer: USA MD ТОТСО
Ultrasonic, 1 indicator in each drilling mud tank,
including gauge tank and trip tank, electronic data
storage system, continuous or selective printout, data
display on a touch screen in real time, suitable for all
areas where it is installed.
To be adapted to a number of tanks.
Manufacturer: USA MD ТОТСО
Ultrasonic, 1 indicator in each drilling mud tank,
including gauge tank and trip tank, electronic data
storage system, continuous or selective printout,
data display on a touch screen in real time, suitable
for all areas where it is installed.
To be adapted to a number of tanks.
MUD VOLUME TOTALIZER
Manufacturer: USA MD ТОТСО. Integrated into the
system of drilling mud pit level indicator
Manufacturer: USA MD ТОТСО. Integrated into
the system of drilling mud pit level indicator
FLOW METER
Manufacturer: USA MD ТОТСО. Located on a flow
line, the indicator is on the driller’s console, where
alarm system is provided.
Manufacturer: USA MD ТОТСО. Located on a
flow line, the indicator is on the driller’s console,
where alarm system is provided.
Depending on well type and client’s requirements
DATA ACQUISITION SYSTEM
It is capable of acquiring and storing data coming from the
instrumentation, which is used during drilling. Manufacturer:
USA MD ТОТСО
It is capable of acquiring and storing data coming from
the instrumentation, which is used during drilling.
Manufacturer: USA MD ТОТСО
EQUIPMENT FOR WELDING AND METAL CUTTING
AC Transformer . Gas cutter
AIR COMPRESSORS
Manufacturer: China Khong- Khua. Model includes
2units. Screw compressors QTD45, capacity 7,5 cub.m./min
at pressure 1MPa. Air collector: 2units х2m3. Buffer air
collector-1,5m3
Manufacturer: China Khong- Khua. Model includes
2units. Screw compressors QTD45, capacity 7,5
cub.m./min at pressure 1MPa. Air collector: 2units
х2m3. Buffer air collector-1,5m3
DRILLING MUD CONTROL
OFFIL Laboratory
OFFIL Laboratory
VERTICAL SLUDGE PUMP
Manufacturer: Russia
Model:
ВШН – 150 -1UNIT
Capacity 150 m3/hour
Electric motor АО 2-7 2-4. Power: 30 kW
Manufacturer: Russia
Model:
ВШН – 150 -1UNIT
Capacity 150 m3/hour
Electric motor АО 2-7 2-4. Power: 30 kW
DRILL WATER TRANSFER PUMP
Manufacturer: China Khong- Khua
Model: VICTORY.
Capacity 200 m3/hour
Power: 55kW
Manufacturer: China Khong- Khua
Model: VICTORY.
Capacity 200 m3/hour
Power: 55kW
RETURN WATER PUMP
Manufacturer: Russia
Model:
НБ-32
Power:
10kW
Manufacturer: Russia
Model:
НБ-32
Power:
10kW
PIPE RACK
Length-20 m
Height-1,5m
Width-28 racks with protective shield
Manufacturer: China according to Russian standards
Length-20 м, Height-1,5м, Width-2
8 racks with protective shield
CATWALK
Equipped with ladders, solid floor, dismountable, the height is in
accordance with pipe parameters
Manufacturer: Russia. Type: box type
Overall dimensions:
20m X 1,5m X2 m
Permissible load: for drill pipes and Drill Collars
Manufacturer: Russia. Type: box type
Dimensions:
20м X 1,5м X2 м
Permissible load: for drill pipes and Drill Collars
DERRICK LADDER
Manufacturer: Russia
Tunnel ladder type with gangways
Manufacturer: China according to Russian standards
Tunnel ladder type with gangways
RAILING
Manufacturer: Russia
Height 1,25m
Manufacturer:
Height 1,25м
EMERGENCY EXIT SLIDE
Manufacturer: China Khong-Khua
Manufacturer: China
VERTICAL SLUDGE PUMP
Manufacturer: Russia. Model; ВШН - 150
power: 30 kW . Capacity 150 m3/hour
Manufacturer: Russia. Model; ВШН - 150
power: 30 kW . Capacity 150 m3/hour
DRILL LINE SPOOLER
Manufacturer: China Khong-Khua
Type:
Electric- Mechanical
Model
DDS-35
Manufacturer: China
Type:
Electric- Mechanical
Model
DDS-35
AC Transformer . Gas cutter
China according to Russian standards
DRILLING RIG HAND TOOLS
A complete range of hand tools, which includes, but not
limited to, striking wrenches for all BOP equipment of
the Contractors, mud pumps, etc., a complete range of
tongs from 56" and up to 8", a complete range of tongs
and socket wrenches of metric and imperial sizes from
3/8" up to 2", complete set of couplings 3/4" with
couplings up to 2" in diameter, complete range of
couplings 3/8" with couplings up to 1-1/4", pneumatic
or hydraulic impact wrench with a complete set of
heads, extensions, universal joints, etc.; suitable for
BOP equipment of the Contractors, mud pumps, etc.
Manually –operated angle grinders, hacksaws, sledge
hammers, ball peen hammers, power hammers,
perforators, bits, screwdrivers, hydraulic cable cutter,
bench vise, chain vise, chain tongs from 56" up to 24"
and manually operated and pneumatic pipe cutters for
cold cut of casings 13-3/8", 10-3/4", 9-5/8"in diameter.
A complete range of hand tools, which includes, but
not limited to, striking wrenches for all BOP
equipment of the Contractors, mud pumps, etc., a
complete range of tongs from 56" and up to 8", a
complete range of tongs and socket wrenches of
metric and imperial sizes from 3/8" up to 2",
complete set of couplings 3/4" with couplings up to
2" in diameter, complete range of couplings 3/8" with
couplings up to 1-1/4", pneumatic or hydraulic
impact wrench with a complete set of heads,
extensions, universal joints, etc.; suitable for BOP
equipment of the Contractors, mud pumps, etc.
Manually –operated angle grinders, hacksaws,
sledge hammers, ball peen hammers, power
hammers, perforators, bits, screwdrivers, hydraulic
cable cutter, bench vise, chain vise, chain tongs
from 56" up to 24" and manually operated and
pneumatic pipe cutters for cold cut of casings 133/8", 10-3/4", 9-5/8"in diameter.
SAFETY FACILITIES AND FIRE-FIGHTING EQUIPMENT
Fire hydrant, fire hoses, fire extinguishers, hooks,
buckets, crows
Fire hydrant, fire hoses, fire extinguishers, hooks,
buckets, crows
STAND ALONE BREATHING APPARATUSES
Isolated gas masks
Isolated gas masks
FIRE EXTINGUISHERS
Number: 30Type : СО2, powder-type fire extinguisher,
other types Location: At the working places and on the
derrick base
Number: 30Type : СО2, powder-type fire
extinguisher, other types Location: At the working
places and on the derrick base
EYEWASH AREAS
Manufacturer: Russia Field hospital
Manufacturer: Russia Field hospital
PERSONAL PROTECTIVE EQUIPMENT FOR PEOPLE
WORKING INSIDE OF DRILLING RIG
Work clothes, safety glasses, hard hats, aprons
Work clothes, safety glasses, hard hats, aprons
ANTI-SKID SYSTEM FOR DRILLING RIG FLOOR
Manufacturer: China
Manufacturer: China
WARNING SIGNS
According to the hazardous factors at the Drilling Rig
According to the hazardous factors at the Drilling Rig
ACCOMMODATION BUILDINGS AND CANTEENS
31 buildings equipped with facilities
31 buildings equipped with facilities
CAMP ON DRILLING SITE
2 blocks drying units
1 block repair
1 block shower-rest room
1 block laboratory
1 block tool pusher’s office
1 block supervisor’s office
BASE CAMP
1 block for expedition management accommodation
2 blocks canteen, kitchen
2 blocks recreation room
1 block shower-rest room
1 block sauna
8 blocks accommodation
1 container -refrigerator
1 block sitting room
1 block expedition’s office
2 blocks for the third-party contractors
1 block health and sanitary
3 blocks of kitchen and canteens
1 drilling foreman’s office and bedroom
1 block for female personnel
accommodation
1 meetings block
1 sauna block
3 supervisor's office block
1 medical and relaxation block.
8 bedroom blocks
2 blocks for contractors'’ accommodation
1 tools storage block
1 chemicals’ storage block
2 drying blocks
1 block for expedition management
accommodation
1.meetings block
2 blocks canteen, kitchen
1 block expedition’s office
1 sauna block
2 hotel block
1 drying block
CONTACTS
«Drilling Systems», JSC
Joint Stock Company
Activity
oil&gas well construction
Tel/fax: +7 (3412) 62-03-47, 62-03-46, 62-03-49
Address:
427000, 1, Golyanskaya, Zavyalovo, Russia, Udmurt Republic
E-mail: office@bs.udm.net
Website: www.bs-udm.ru