Logistics Services Packaging Services Update April 2012, Reghed Presented By: Marc Flynn, LLWR Logistics Services Manager (RAMTUC Chairman) Packaging Services – – – – – LLWR Packaging Services Team LLWR Packaging Services Scope LLWR Packaging Services - Request for services process Packagings available and associated equipment (sale) Packagings available and associated equipment (hire) – 2012/13 new Packagings and equipment – Package Support Services – Package Operational Guidance Documentation – New Container Release Protocol Head of Waste Services Martin Walkingshaw Integrated Logistics Services Team Logistics Services Manager Marc Flynn Package Design Authority Bob Millington Packaging Quality Inspector Bert Clark Packaging Quality Inspector Jason Dodd Packaging Design Engineer VN Tel – 019467 70301 transportandlogistics@llwrsite.com DRS Head of Commercial Beverly Stobhart Packaging Services Manager Barry Mellor Transport Services Manager Alison Fotheringham DRS Account Manager Carmen Little Packaging Services Engineer Simon Williams Transport Services Specialist Laura Bell DRS Operations Surele.Wykes Packaging Services Engineer VN Transport Services Suport Gillian Rogers DRS Operations Angela.Hoskins Packaging Services Specilaist Mark Williams Packaging Services Specilaistr Gillian Spence Packaging Services Support Elaine Dobbin Packaging Project Engineer Bill Robson Packaging Services - Scope • • • • • • • Package/Ancillary/Stillage Design & Manufacture Container Licensing Management (SA & CA) Licensed Container Supply - Re-usable (rental) - Disposal (supply) - Used Disposable (supply and buy back) err Support, CSC Inspections, Leak tests - Container Operational Low Cost Disposable Receptacle/Package Supply Container spares (Supply) Container Repair (assessment to full repair) Waste loading Assessment Service (WLPs) Services Process LEN Recieved Logistics Services process integrates Packaging Services and Transport Services Generate Ref No for LSE form & advise Customer Rental Buy Rental or Buy? LLWR produces quote for purchase LLWR produces quote for rental Delivery Required Yes No LEN LENForm Form LSQ Form LLWR authorises & sends LSQ to Customer Quote on Hold until LLWR/DRS populate transport section Customer Response Customer accepts quote and forwards P/O Number to LLWR with signed quotation Accepts Container released (and Delivered if T requested) LLWR Packaging Offered Today TC05 TC01 & TC03 0017A via SL TC24 TC10 TC02 TC01 developments TC01 – Re-Licensed with 3 x operational systems 1. Single use disposable option 2. 3 x Multi-use option (2/3 pay load) with no restrictions other (than informing LLWR on usage and usual WLP requirements) 3. New ACEP option (2/3 pay load) for multi-use with restrictions on loading arrangements LLWR IP-2 ISO Container Supply (TCxx) • Successfully re-tested TC01, TC08 & TC03 designs at 2 x new manufacturers over the past 12 months • New Container Manufacture and Design Support Framework Contract in place - 3 x container manufacturers – W H Davis Containers – Bootle Containers – Yorkshire Marine Container Solutions • Sustainability of Container Supply – healthy! Transport & Logistics Container Release Process Container Release Process post acceptance of quote when arranging own transport 1. Send request to collect containers in writing (email) to LLWR 2. LLWR will prepare a Container/Ancillary Equipment Release Form Note – LLWR has 3 x Container manufactures located in different areas 3. LLWR will prepare a Container/Ancillary Equipment Release Form 4. Copy of the Release Form is sent to the applicable Manufacturer and Customer 5. Customer must provide copy of the Release Form to their Driver 6. Upon arrival at Manufacturer, Release Form is checked to aligns with the Release Form emailed to the Manufacturer from LLWR 7. Containers will be loaded onto the conveyance for transport Warning – Without possession of a Release Form Containers will not be released from the manufacturer Packaging in progress – 2012/13 TC02 Waste Boxes; full size & half size & quarter size TC14 IP-2 Drums (liquid and solid) Packaging in progress – 2012/13 TC02 Optimum Capacity half size Stillage 15te TC02 Optimum Capacity full size Stillage (and Drum variant) 29te Packaging developments for VLLW VLLW Packaging Packaging in progress – 2012/13 TC11 SSP Delivery System Packaging in progress – 2012/13 License Status TC16 NEW - Oversize IP-2 Powered Recovery Container with variable internal restraint system Packaging Support - Guidance Notes 1- 9 PAA/GN01 - IP-2 ISO CONTAINER CSC INSPECTION AND SEAL LEAKAGE TEST – uprevd PAA/GN02 - IP-2 ISO CONTAINER DIRECT POUR ENCAPSULATION – uprevd PAA/GN03 - STUD REPAIR GUIDANCE PAA/GN04 – SECURING ITEMS IN TC01, TC03 GUIDANCE - Schedules 1 – 11 - 11 X STANDARD LOADING PLANS – uprevd PAA/GN05 – MINIMUM MONITORING REQUIRMENTS FOR IP-2 ISO CONTAINERS uprevd - Schedule 1 - TC02 MIMUMUM MONITORING PAA/GN06 – OPERATIONAL QUALITY PLAN FOR VLLW CONSIGNMENT PAA/GN07 - DRUM SECURING IN FULL HEIGHT IP-1 ISO CONTAINERS – IN PREP PAA/GN08 – OPERATIONAL QUALITY PLAN FOR TC02 PAA/GN09 – OPERATIONAL QUALITY PLAN FOR TC01 & TC03 End