Awlwash & Awlcare – Maintenance Products
Boat Maintenance Products
Awlgrip Boat Maintenance Products
•
Cleaning is one of the easiest tasks that the
boat owner can undertake; it also has the
advantage of producing a result that is
immediately visible.
•
The boat maintenance products offered by
Awlgrip have been specifically developed to
ensure that Awlgrip topcoats last for years.
•
Using these dedicated ‘fit for purpose’
products will help to eliminate the premature
dulling of the coating that the use of
unsuitable, harsh cleaners can cause.
•
Using AWLWASH and AWLCARE together
will provide the safest and most effective
protection for your boat’s Awlgrip topcoats.
AWLWASH wash down concentrate; 7 reasons to
use AWLWASH
1.
Formulated to clean Awlgrip, Awlgrip HS, and AWLCRAFT 2000
topcoats.
2.
Does not contain acids, alkalines or abrasives.
3.
100% biodegradable.
4.
AWLWASH is free rinsing which decreases
drying time.
5.
Available in US quart and 1 gallon containers.
6.
Fully compatible with AWLCARE:
Designed to clean topcoat without excessive removal of AWLCARE protective polymer coating.
7.
Comes in a refillable ‘Tip ‘N’ Measure’ container, which makes it easy to obtain the correct mix
ratio:
One ounce (30mls) of AWLWASH per gallon (3.79L) of water.
AWLCARE protective polymer sealer; 6 reasons
to use AWLCARE
1.
Increases resistance to attack from acid rain and other
environmental pollutants with regular applications
2.
Removes mild stains such as water spots and diesel soot
3.
AWLCARE leaves a non-yellowing, protective polymer coating
which lasts through multiple washings
4.
Contains no harsh abrasives and will not scratch the painted
surface
5.
Hand applied, non-abrasive synthetic polymer formulated to clean
and protect Awlgrip, Awlgrip HS, and AWLCRAFT 2000 topcoats.
6.
Available in US pint and half gallon containers
Using AWLWASH & AWLCARE together – the proof
Awlgrip laboratory testing of the gloss retention capabilities of AWLCARE on two
samples of Awlgrip HS Vivid Red topcoat during prolonged (3000hrs) QUV testing:
• Sample #1 was washed in AWLWASH,
• Sample #2 was washed in AWLWASH followed by coating with AWLCARE.
•
Recommended concentrations were used in all cases.
•
The QUV machine replicates extreme environmental conditions, alternating
between:
• 4hrs of exposure: 100% UV light at 140°F/60°C and
• 4hrs of exposure: 100% humidity at 106°F/41°C.
•
At intervals of 250 hours, the sample panels were removed, tested for gloss values,
re-treated accordingly (as per sample #1 or sample #2) and re-subjected to QUV
testing.
•
All gloss values were measured in controlled laboratory conditions using 60° gloss
meter.
Using AWLWASH & AWLCARE together
Test Results - Graphical Representation
NOTE:
The dots correspond
to intervals of 250
hours when coatings
were re-applied
Gloss Value
AWLWASH &
AWLCARE
AWLWASH
alone
0
250
500
750
1000
1250
1500
1750
2000
Hours of QUV exposure
2250
2500
2750
3000
Using AWLWASH & AWLCARE together; test
results – the conclusion
The sample that had been washed in AWLWASH and then coated with AWLCARE
(sample #2) performed significantly better than the sample that had just been
washed in AWLWASH (sample #1):
• Sample #1 showed a deterioration in gloss value of almost double that of
sample #2 after 3000 hours
CONCLUSION:
• The paint maintenance products offered by Awlgrip have undergone
extensive laboratory and marine testing to guarantee their quality and
effectiveness;
• Application of AWLCARE can improve topcoat gloss retention by up to 12%,
even in the most arduous conditions.
Products not to be used on Awlgrip Topcoats
•
Do NOT use abrasives, scratch pads, or compounds
on Awlgrip topcoats.
•
Also, do NOT use:
• Dish detergent, metal polishes, acidic soaps
or soaps with a high alkalinity
•
Abrading the surface reduces the overall life
of the finish:
• By giving dirt a place to cling, and
• Wearing out the resin layer
•
Do NOT allow teak cleaners to come into contact with Awlgrip® topcoats.
• Most teak cleaners contain acids or caustic agents that can stain and discolor high
performance Awlgrip® topcoats.
Cleaning Equipment
As with most jobs, using the correct equipment makes the
task easier. The material requirements for keeping your boat
clean are few and uncomplicated:
• Brushes:
Brushes with a soft texture (yellow) are suitable for use on
Awlgrip® painted surfaces. Brushes with a coarse texture
(white) should not be used on painted surfaces but reserved
for use on non-slip decks and other tough surfaces.
• A bucket:
Remember to adhere to recommended dilutions
• An old toothbrush:
Use an old toothbrush to get to those difficult-to-reach areas
• A chamois:
A synthetic chamois is fine for drying and they are cheaper
and longer lasting than the natural version too!
Caring for your boat
1.
Rinsing your boat with fresh water
Remember that fresh water is a safe and readily available cleaning agent.
By doing this you will drastically reduce the amount of time needed to wash and wax it.
2.
Drying your boat
Once you have finished washing your boat it is good practice to get it dried as quickly as
possible to prevent water marks
3.
Protective covers – tarpaulins
Tarpaulin, constructed from heavy-duty vinyl or canvas,
is used to shield the upper decks from the attack of the
elements.
It is particularly useful in protecting painted and varnished
surfaces from the effects of UV rays.
Safety When using Boat Cleaning Products
•
Some boat cleaning products in common usage are either
strongly acidic, like rust remover, or strongly alkaline, like
degreaser.
•
In general, for all boat cleaning products:
• Always read the manufacturer's full Health & Safety
guidelines and all instructions for use that are printed on
the label.
When working on a slippery deck surface wear:
• Deck shoes
• Life jacket
• Safety harness
• Safety glasses
• Chemical resistant gloves
Availability
Awlwash O73234 & Awlcare O73240 are available now, please
contact your local Customer Order Desk or your Local Awlgrip
Technical Sales Representative for further details.
For further information relating to the products featured in this
presentation, please refer to our website www.awlgrip.com