PROFESSIONAL RETAIL CATALOGUE
High quality innovative coatings
to optimise and protect wood
Sirca specialises in the production of coatings for wood. This living material,
which is increasingly valuable and essential in ecological terms, deserves
the best possible optimisation and protection.
Sirca products are mainly intended for the furnishing segment and are often
developed in collaboration with some of Italy’s most prestigious furniture
stores.
Quality of application, colour customisation and duration over time are all
distinctive traits of Sirca coatings, which are flanked by an equally important
production of polymers, for various segments ranging from technological
structures to fashion design.
ECOLOGICAL LOGIC
Respect the environment and people.
Sustainable progress is today an absolute must, particularly in the
chemical industry. Sirca strives, day-in, day-out, to pursue continuous
improvement on all levels, to express the positive attention paid to the
environment. This objective takes tangible form in the selection of raw
materials, the reduction of energy consumption and that of natural
resources, the elimination of emissions and the lengthening of the life cycle
of a great many products, thanks to the quality of the finishes and glues.
CERTIFIED QUALITY
Sirca S.p.A. pays particularly close attention to the growing demand for
products certified for specific uses, in order to support its customers in
the constant development of their market.
Sirca therefore constantly monitors the change or creation of new
standards and certifications, both nationally and internationally, and
formulates, amends and tests its products to meet these requirements.
We recommend you visit the certifications section of the website www.
sirca.it to find out which products are certified as shown below.
INDEX
PAG
06
FURNITURE FOR THE KITCHEN / BATHROOM / BEDROOM / TOYS
07
SKIRTING BOARDS / INTERNAL BEAD BOARDS / WIRE COVERS
08
CHAIRS / TABLE BASES / LATHED PRODUCTS
09
INTERIOR DOORS / PANELLING
10
ASSEMBLED FURNITURE AND TABLES
11
WOOD FLOORING, PARQUET AND PLANKS
12
BOAT FURNISHINGS
13
COFFINS
14
EXTERNAL FIXTURES / SHUTTERS / COTTAGE / FENCES / GAZEBOS / BEAMS
15
LACQUERED MDF
16MELAMINE PAPERS / LAMINATES / GLASS
17
PRECOMPOSED AND PRE-COATED VENEERS
01.
1/1
FURNITURE FOR THE KITCHEN I BATHROOM
BEDROOMS I TOYS
CYCLE TYPE
SURFACE
S TA I N
Closed pore
polyurethane
Various
stains
Open pore
1/2 polyurethane, pore
marking
1/3
Open pore acrylic
1/4
Water-based
1/5
06
*
Decapè effect
SEALER
TOPCOAT
cte5000 series
or Cii series
fpu52
opu77s15 gloss
Ash
Oak
cte5000 series
or Cii series
fpu15s01
opu91 gloss
Light
stains
cte5000 series
or Cii series
fpu132i
opu79 gloss
ctw8000 series
fw002
ow102 gloss
cte500 series
fpu132i
opu79 gloss
Ash
Chestnut
Oak
The sealer is always applied after the stain
PRIMER*
02.
SKIRTING BOARDS I INTERNAL BEAD BOARDS
WIRE COVERS
CYCLE TYPE
SURFACE
S TA I N
2/1
Polyurethane
Various
stains
2/2
Nitro
2/2
Water-based
*
PRIMER*
SEALER
TOPCOAT
cte5000 series
fpu42tixs05
opu77s15 gloss
Various
stains
cte5000 series
fnc53
onc102 gloss
Various
stains
cte5000 series
fw110
ow104 gloss
The sealer is always applied after the stain
07
03.
CYCLE TYPE
SURFACE
S TA I N
3/1
Polyurethane
Oak
Ash
Beech
3/2
Nitro
Water-based
3/3
08
CHAIRS I TABLE BASES I LATHED PRODUCTS
*
SEALER
TOPCOAT
ctw8000 series
+ ima856
fpu42tixs05
opu77 tix gloss
Oak
Ash
Beech
ctw8000 series
+ ima856
fnc67
onc102 gloss
Oak
Ash
Beech
ctw8000 series
+ ima856
fw110
ow098 gloss
The sealer is always applied after the stain
PRIMER*
04.
INTERIOR DOORS I PANELLING
CYCLE TYPE
SURFACE
S TA I N
4/1
Closed pore
polyurethane
Various
stains
4/2
Open pore
transparent acrylic
4/3
4/4
*
PRIMER*
SEALER
TOPCOAT
cte5000 series
fpu52
opu77s15 gloss
Various
stains
cte5000 series
fpu15s01
opu91 gloss
Clear acrylics for
open pore
Various
stains
cte500 series
fpu132i
opu79 gloss
Water-based
Various
stains
ctw8000 series
fw002
ow102 gloss
The sealer is always applied after the stain
09
05.
CYCLE TYPE
SURFACE
S TA I N
SEALER
TOPCOAT
5/1
Water-based
Solid wood
or veneer
ctw8000 series
fw110
ow098 gloss
5/2
Closed pore
polyurethane for
furniture
Solid wood
or veneer
cte5000 series
fpu52
opu77s15 gloss
Glossy polyurethane
Solid wood
5/3
for assembled
or veneer
furniture
cte5000 series
fpu27tix
Ipu134
cte5000 series
fpu15s01
opu91 gloss
5/4
10
ASSEMBLED FURNITURE I TABLES
*
Matt polyurethane
for table tops
Solid wood
or veneer
The sealer is always applied after the stain
PRIMER*
06.
WOOD FLOORING I PARQUET I PLANKS
CYCLE TYPE
SURFACE
S TA I N
PRIMER*
SEALER
TOPCOAT
6/1
Polyurethane
Various stains
cte5000 series
in solid wood
fpu16
opu60 gloss
6/2
Acrylic
Various stains
cte5000 series
in solid wood
fpu132i
opu79 gloss
6/3
Water-based
Various stains
cte5000 series
in solid wood
idrofloor
idrofloor
6/4
Water-based
for woods rich
in extractive
substances
idrofloor
idrofloor
*
Various stains
in solid wood
fiw350
The sealer is always applied after the stain
11
07.
CYCLE TYPE
SURFACE
S TA I N
PRIMER*
SEALER
TOPCOAT
7/1
Polyurethane
Multilayer
in various
stains
ctw8000 series
fpi35s06
fpu16
opu60 gloss
7/2
Acrylic
Multilayer
in various
stains
cte5000 series
fpi35s06
fpu132i
opu79 gloss
Polyester
Multilayer
in various
stains
cte5000 series
fpi35s06
pcv2006
Ipu132
7/3
12
BOAT FURNISHINGS
*
The sealer is always applied after the stain
08.
COFFINS
CYCLE TYPE
SURFACE
S TA I N
PRIMER*
SEALER
TOPCOAT
8/1
Polyurethane
Solid wood
or veneer
cte5000 series
fpi35s06
fpu42tixs05
opu77tix gloss
8/2
Glossy polyester
Solid wood
or veneer
cte5000 series
fpi35s06
pcv2012est
fl2700s03
8/3
Polyurethane
Solid wood
or veneer
cte5000 series
fpi35s06
pcv2007
fl2700s03
8/4
Water-based
Solid wood
or veneer
ctw8000 series
fpi35s06
fw110
ow098 gloss
*
The sealer is always applied after the stain
13
09.
9/1
9/2
FIXTURES, WINDOWS | SHUTTERS | COTTAGE | FENCES
GAZEBOS AND BEAMS
CYCLE TYPE
SURFACE
S TA I N
CQA certified
water-based
Softwood
imw4000 series
Uncertified
water-based
PRIMER*
9/3
Water-based
9/4
Water-based
Hardwood
imw4500 series
imw4500 series
TOPCOAT
owe026g30
Pine,
Douglas, Fir,
Helmock, imw4800 series
Larch,
similar
Russian
Larch and
Iroko
SEALER
fiw 370
fwe600
owe500g30
fwe600
owe500g30
fwe600
owe026g30
NB: wooden walls, benches, gazebos and similar
9/5
14
*
D’AQUA line
Softwood and
im3000 series
Hardwood
The sealer is always applied after the stain
owe026g30
10.
LACQUERED MDF
CYCLE TYPE
SURFACE
S TA I N
PRIMER*
SEALER
TOPCOAT
10/1
Polyurethane
fpp021
opp530ni
10/2
Styrene-free
polyester and
polyurethane
Poliwhite-voc
opp530ni
10/3
Polyester and
polyurethane
pcv
2090est
opp530ni
10/4
Water-based
fwpi130
owbp530 gloss
*
The sealer is always applied after the stain
15
11.
MELAMINE PAPERS I LAMINATES I GLASS
CYCLE TYPE
16
SURFACE
S TA I N
PRIMER*
SEALER
TOPCOAT
11/1
Water-based roller
for glass
Wetroll series
11/2
Water-based spray
for glass
Wetroll series
11/3
Polyurethane
for impregnated
papers
*
The sealer is always applied after the stain
fpi33s02
fpu20
opu77s15 gloss
12.
PRECOMPOSED AND PRE-COATED VENEERS
CYCLE TYPE
SURFACE
S TA I N
PRIMER*
SEALER
TOPCOAT
12/1
Polyurethane
fpu15s01
opu91 gloss
12/2
Acrylic
fpu132i
opu79 gloss
12/3
Water-based
fw002
ow102 gloss
*
The sealer is always applied after the stain
17
Sirca, highly professional coatings to
protect and enhance the beauty of wood
TECHNICAL GLOSSARY
NITRO PRODUCT RANGE
FNC Transparent sealers - ONC Matt transparent topcoats - LNC Glossy transparent topcoats
FNP Pigmented sealers - ONP Matt pigmented topcoats - LNP Glossy pigmented topcoats
These are monocomponent sealers, topcoats and self sealers in matt and high gloss versions, transparent and pigmented.
These products are easy to apply using standard methods, only requiring suitable dilution. Quick physical drying products. Easily applied on solventbased coatings. Historic products currently used for painting of stylish furniture. The final result in visual terms is superior to any other coating
product.
POLYESTER PRODUCT RANGE
PCV sealers - FO Matt topcoats - FL Glossy topcoats
The polyester sealers are the most used, both in their pigmented and transparent versions. It is a three-component system that includes a cobaltbased accelerator and a peroxide. Depending on the type and quantities of peroxide and accelerator, the reactivity of polyester products can be
controlled according to production requirements. The stain applied should be overcoated with a primer, before the application of the sealer.
The polyester topcoats are still used in certain specific environments.
Slow-drying physical and chemical products with extensive solid content.
These sealers are extensively used in the high quality furniture sector, and particularly in full gloss cycles.
SOLVENT-BASED POLYURETHANE PRODUCT RANGE
FPU Transparent sealers - OPU Matt transparent topcoats - LPU Glossy transparent topcoats
FPP Pigmented sealers - OPP Matt pigmented topcoats - LPP Glossy pigmented topcoats
This is currently the most popular product range used for wood coating, thanks to their extreme versatility and ease of application, using standard
applications. This is a bicomponent system including sealers, topcoats and self sealers in matt and high gloss versions, transparent and pigmented.
Depending on the hardener and diluent used, the cycle can be adapted to any application system to achieve the desired productivity and final quality.
The correct choice determines the final chemical-physical characteristics desired. Can be used solvent- and water-based coatings.
SOLVENT-BASED ACRYLIC PRODUCT RANGE
FPU Transparent sealers - OPU Matt transparent topcoats - LPU Glossy transparent topcoats
FA Pigmented sealers - OPA Matt pigmented topcoats - LPA Glossy pigmented topcoats
It is a bicomponent system including sealers, topcoats and self sealers in matt and high gloss versions, transparent and pigmented.
These products are characterised by low solid content, fast drying times, exceptional wetting of the surface, antiyellowing and pore marking
properties. Can be used solvent- and water-based coatings.
WATER-BASED ACRYLIC AND POLYURETHANE PRODUCT RANGE FOR INDOOR USE
FW Transparent sealers - FWPI Pigmented sealers - OW Transparent topcoats
OWPI Single-component pigmented topcoats - OWBP Two-component pigmented topcoats
Low environmental impact product range, a more environmentally-friendly alternative to solvent-based acrylics and polyurethanes. These are
mono and bicomponent systems including sealers, topcoats and self sealers in matt and high gloss versions, transparent and pigmented. They are
versatile products that adapt to any application system to achieve the desired productivity and final quality.
The correct choice of hardener and dilution with water determines the final chemical-physical characteristics desired. Can be used solvent- and
water-based coatings.
WATER-BASED ACRYLIC PRODUCT RANGE FOR OUTDOOR USE
FWE Transparent sealers - FIW Sealers - FWP Pigmented sealers
OWE Transparent topcoats - OWP Single-component pigmented topcoats
These are odour-free water-based products that have excellent characteristics in terms of elasticity, transparency, resistance to atmospheric
agents, UV rays and blocking. They have a low content in solvents and optimal verticality, making them suitable for coating items intended for
outdoor use, such as fixtures, shutters and wooden front doors.
www.sirca.it