Presentation of SC ROFEP SA
S.C. ROFEP S.A. Urziceni is the only producer
in Romania for soft and hard ferrite and the most
important Romanian producer for collecting
brushes for electrical motors.
Our products are addressed mainly for:
- electronic and electrotechnic industry;
- energetic industry;
- metal-working;
- production of automotive.
SC ROFEP SA URZICENI
- 1968 founding factory –the fabrication of
soft ferrite under the license of PLESSEYAnglia;
- 1996 the develop of a new profile of
fabrication - fabrication of the brush
gathering for electric engine and other
carbuncular materials;
- 2002 entrance in the Group of Firms
ADRAS (78,835% from registered capital);
- 2005 the increase of registered capital
(89,38% from registered capital hold by the
Group ADRAS).
•
•
•
•
With the Romanian institutes and our own research, the ferrite
productions diversified, at the moment getting to a wide
products range:
Soft ferrites -12 types of materials, from which:
· 9 types on Mn-Zn (with code MZ -1………..MZ- 9)
· 3 types on Ni-Zn (with code NC - 4, NC - 5, NC - 6)
Hard ferrites - 8 types of materials from which:
· 5 types of barium ferrites ( with code FB - 1, FB - 2.1, FB 2.2,
FB - 3 and FB - 4)
· 3 types of strontium ferrites (with code FS - 4.1, FS - 4.2, FS 5)
Magnets assemblies - addressed to oil purification for heat
engine baths, separation of ferromagnetic bodies from cooling
and washing liquids
of rectified machines, separation of chopped fodder and seeds
by ferromagnetic bodies, precision comparators on machinestools, door closing to domestic furniture, for water magnetic
treatment and for other liquids in view of removing of
calcareous crusts deposits, magnetotherapy.
Other products - sets of radio shielding ignition plugs,
ramification case (carcass), deflecting tools, etc.
• Beginning with year 1986, S.C. ROFEP S.A. has
developed a new profile of manufacturing,
respectively the manufacturing for collecting
brushes
for electrical motors and other carboniferous
material, in four groups of half finished products:
- Metal-graphite (MGR)
- Electro-graphite (EGR)
- Bakelite-graphite (BGR)
- Hard-carbon (CDR)
• Tools, devices, moulds
At request, can be manufactured moulds for ceramic
and metallic powder, injecting moulds for plastics,
various types of stamping dies.
• Other activities
In it's auto-manufacture section S.C. ROFEP
S.A. manufactures at the beneficiary's request:
- specific equipment for manufacturing of
ceramic products (mills with balls, calcinations
oven for heat treatment, specific grinding
machines, equipment for transport);
- metal constructions (fences, greenhouses,
benches)
- spare parts for consumer goods.
• SC ROFEP SA produces sets of flash cards
for a vehicle. Over the years have been
similar sets of chips for cars brands Dacia
Renault, Citroen, Daewoo.
• Manufacturing components required on
based:
- presses
- injection presses
- extruded
- crimping presses
- machines for semiconductor.
Flow technology for achieving soft magnets
and hard cover a range of machines such as:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Mills • 400 l, 2000 l 2400 l Ovens
Rotary of burning with electric heating and drying stove
Gas drying powder
Powder and granular storage tanks
Presses from 10 tons, 12 tons, 45 tons, 100 tons, 200 tons, 250
tons, 1000 tons
Furnace heat treatment and controlled atmosphere type SMITH,
m = 16
Oven type SFEAT, 1 = 18 m
Oven type LV, 1 = 8 m
Oven type LW, 1 = 6 m
Oven type SIN, 1 = 4 m
Oven type RIEDHAMMER, 1 = 58 m
Grinding machines type SFSR, Lumsden, DW, 3 B
Grinding machines
MRS segments type
Extruded magnetic strip magnetic
Products of SC ROFEP SA
Hard ferrites
Soft ferrites
Plastoferrite
Collecting Brushes
Iron powder products
Magnetic circuits
Other products
Other products
Other products
Industrial halls constructions
• The available lands existent in the industrial
area in the N-W of Urziceni allow profitable
investments in construction of new industrial
halls.
• The existence of specialized constructor
companies and of several construction yards
allows realization in short time of some
industrial constructions. The land does not
imply special consolidation.
THE ADVANTAGES TO COLLABORRATE WITH SC
ROFEP SA:
•
•
•
•
•
•
•
•
The fact that the economic environment is secure in Romania because
is a member country in the European Union;
All the cost from taxes which where coming from taxes when the
products entered on the European space will not be necessary
because the products will be fabricated in Romania and for these
products there are no taxes issued because Romania is a country
member on the European Union;
To reduce all the costs of transportation, costs which increased the
cost for your product;
Qualified personnel in the industrial domain for manufacturing the
components from the auto domain;
The possibility to approach many markets from Europe because the
central position of Romania in Europe;
The reduction of the time for transporting the manufactured products;
The security of the transportation because can't occurred major
events because all the means of transportation will be by auto
transportation;
Of course the fact that the products will be manufactured together will
have the fabrication brand "made in European Union" and these will
offer trust and security and could be the result of future partnership of
a long period of time.
- Romania’s position on the Globe is given mainly by
our country’s location in the Northern hemisphere, at
half distance between the Equator and the North
Pole (being crossed by the 45° parallel Northern
latitude) and in the Eastern hemisphere (being
crossed by the 25° meridian Eastern longitude).
- The 45° parallel Northern latitude intersects our
country through its central and southern part and
the 46° parallel Northern latitude divides the country
into two almost equal parts.
- The geometric center of the country is situated in
the intersection of the two central coordinates: the
46° parallel Northern latitude and the 25° meridian
Eastern longitude).
Romanian’s position in Europe
► Romania is an European State.
► Surface: 238,391 s km;
► Population: almost 22 million
inhabitants;
► Located: approximately in the middle
of the European continent, at almost
equal distance from:
- the Arctic Ocean (North)
- the Atlantic Ocean (West)
- the Ural Mountains (East)
► Romania’s Regional Dimensions
- open (by means of the Black Sea) to
the near Asiatic space;
- links what is still named the West and
the East;
- access from Central Europe to
Eastern Europe, on the Danube,
and by means of the Black Sea to
the Caucasian-Caspian Sea region;
Urziceni’s position in Romania
Urziceni
Advantages for the industrial platform Rofep
- total surface : 62.841.44 sqm
- 57,5 km distance from Bucharest, the capital of Romania;
- direct acces to DN2 (E85) Bucuresti-Buzau
- the industrial platform is situated at cca 60 km from the Aeroport Henri Coanda,
Otopeni and cca 200 km from Constanta which is a naval port to the Black Sea.
- 80 km distance to Fetesti which is a naval port to the Danube, river which gives the
possibility to the naval transport to all the European markets.
- 100 km distance to Giurgiu which is also a naval port to the Danube
- the industrial platform is located near the cross roads of
- DN 2 (E 85) – Bucuresti - Buzau - Iasi;
- E60 – Bucuresti - Slobozia - Constanta;
- DN1D – Ploiesti - Brasov - Sibiu;
- DJ203I – Bucuresti - Braila - Galati;
- 0,5 km ralwey station
- the buildings are for the development industrial projects which can have these
activities or also other activities; the system of transportation by railways from
Romania is very developed and the train station for the industrial area is very close,
is situated at 500 meters.
- the industrial platform is connected to the power energetic system and natural gas,
also as to the municipality water. The industrial platform has 3 water resource
owned by Sc Rofep Sa which assure the industrial water. Electrical energy::
3*380V+N; compressed air: pression 7 bar; natural gas: 200 mbar.
- the labor force is high-qualified and prepare to develop industrial projects in all
domain
Industrial halls constructions
Building lists:
1. Ferrites fabrication building
- construction: P+partial floor
- building surface: 8192 sqm
- field surface: 10.019 sqm
utilities: electrical power, water, compressed air, heating, metan gas.
2. Hard ferrites building
- construction: P
- building surface: 775 sqm
- field surface: 898 sqm
3. Building
- construction: P+3
- building surface: 1100 sqm
- field surface: 652 sqm
utilities: electrical power, water, compressed air, heating, metan gas.
4. Offices Building
- construction : P+2
- building surface: 2241 sqm
- field surface: 2066 sqm
utilities: electrical power, water, compressed air, heating, metan gas
5. Warehouse
- construction: P+ warehouse
- building surface: 634 sqm
- field surface: 1099 sqm
utilities: electrical power, water, compressed air, heating, metan gas
6. Building
- construction: P
- building surface: 575 sqm
- field surface:1099 sqm
utilities: electrical power, water, compressed air, heating, metan gas
7. Building for auxiliary activities
- construction: P
- building surface: 1368 sqm
- field surface: 1467 sqm
8. Building:
- construction: P+1
- building surface: 774 sqm
- field surface 925 sqm
9. Building for collecting brushes
- construction: P
- building surface: 4548 sqm
- field surface: 5293 sqm
10. Building:
- construction: P+2
- building surface: 3330 sqm
- field surface: 1776 sqm
utilities: electrical power, water, compressed air, heating, metan gas
11. Building:
- construction: P+7
- building surface: 6912 sqm
utilities: electrical power, water, compressed air, heating, metan gas
12. Warehouse
- construction: P+1
- building surface:1152 sqm
- field surface: 5625 sqm
13. Building for warehouse
- construction: P
- building surface: 1049 sqm
- field surface: 1049 sqm
14. Building for maintenance
- construction:P
- building surface: 1043 sqm
- field surface:1049sqm
15. Building:
- construction: P
- building Surface: 238 sqm
- field Surface: 238 sqm
utilities: electrical power, water, compressed air, heating, metan gas
Current production buildings
1. Hall 26 x 16 x 9 = 416 sqm
5 tons force bridge crane – 5 m with hook
2. Hall 50 x 16 x 9 = 800 sqm
12 tons force bridge crane – 5 m with hook
3. Hall 50 x 14 x 9 = 700 sqm
8 tons force bridge crane – 5 m with hook
4. Hall 108 x 72 x 9 = 7776 sqm
Without bridge crane (but it can be applied)
These sizes can be extended or reduced according to
the executed activity
Personnel and security
• The personnel is very well qualified in the
industrial field
• The security is ensured by our own
means.
SC ROFEP SA Urziceni Romania
CONTACT
DUMITRU STOIAN
• Tel:
+4 0744.554.298
• Office: +4 0743.167.267
• Email: dumitru.stoian@rofep.ro
dstoian@rofep.ro
• Web:
http://www.rofep.ro/en/index_en.php