๐ Managerial Accounting — Chapter 1: Managerial Accounting and Cost Concepts 1) Needs of Management: Financial vs Managerial Accounting Financial Accounting (external reporting) Purpose: Report financial results to outsiders.โ Users: Stockholders, creditors, regulators. Brewer9e_Chap01_PPT[1] โ Typical focus: What already happened (past).โ Style: Formal rules/standards, highly summarized, consistent. Managerial Accounting (internal decision support) Purpose: Give information to managers inside the organization so they can: โโ Plan (set goals, budgets) โโ Control (monitor performance, fix problems) โโ Make decisions (choose best alternative)โ Brewer9e_Chap01_PPT[1] โ Final exam takeaway: โโ Financial accounting = external + reporting โโ Managerial accounting = internal + planning/control/decisions 2) Why Classify Costs? (the 5 big reasons) Managers classify costs to: 1.โ Assign costs to cost objects 2.โ Account for costs in manufacturing 3.โ Prepare financial statements 4.โ Predict how costs change when activity changes 5.โ Make decisions (choose between alternatives) Think: same cost can be “labeled” differently depending on the purpose. 3) Assigning Costs to Cost Objects (Learning Objective 1) What is a “cost object”? A cost object is anything you want to measure the cost of, such as: โโ โโ โโ โโ โโ A product (one chair) A batch (100 chairs) A department (assembly department) A customer (Customer A) A job (custom order) Direct costs Direct costs are costs you can easily and conveniently trace to a specific cost object. โ Meaning: you can point to the product and say “this cost belongs to that.” Examples: โโ Direct materials (wood used in a table) โโ Direct labor (wages of the worker building that table) Easy test: If you can measure exactly how much of the cost was used for ONE product/job without too much effort, it’s direct. Indirect costs Indirect costs cannot be easily and conveniently traced to one cost object. โ Examples: โโ Factory rent โโ Supervisor salary โโ Equipment depreciationโ These support production, but you can’t easily say how much rent belongs to one specific unit. Common costs (special type of indirect cost) Common costs are indirect costs incurred to support multiple cost objects and cannot be traced to any single one. โ Example idea: One factory manager supervises multiple product lines. โ Final exam rule:โ If tracing the cost to one product is not practical, treat it as indirect (even if it “feels related”). 4) Manufacturing Cost Categories (Learning Objective 2) In a manufacturing company, production costs fall into three buckets: A) Direct Materials (DM) usually variable Raw materials that: 1.โ become an integral part of the finished product, AND 2.โ can be conveniently traced to the product Example from slides: a radio installed in an automobile. B) Direct Labor (DL) usually variable Labor costs that can be easily traced to individual units produced. โ Example: wages paid to automobile assembly workers. C) Manufacturing Overhead (MOH) Everything else needed to run the factory that is not DM or DL. โ Includes: โโ Indirect labor (people who support production but don’t build each unit directly, like maintenance, supervisors) โโ Indirect materials (small items hard to trace per unit, like glue, screws, cleaning supplies) โโ Other factory costs MOH examples (from slides) โโ โโ โโ โโ Depreciation on manufacturing equipment Factory utilities Property taxes (factory) Insurance premiums (factory)โ ๐จ Key boundary:โ Only indirect costs of operating the factory go into MOH. โ Corporate office costs are not MOH. 5) Prime Costs and Conversion Costs These are groupings of the manufacturing costs: Prime Costs Prime = Direct Materials + Direct Labor โ Called “prime” because they’re the main costs that directly touch the product. Conversion Costs Conversion = Direct Labor + Manufacturing Overhead โ Called “conversion” because these costs convert materials into finished goods. โ Final memory: โโ Prime = DM + DL โโ Conversion = DL + MOH 6) Product Costs vs Period Costs (Learning Objective 3) This classification is for financial statements. Product costs Product costs = all costs of acquiring or making a product. โ For manufacturers, product costs are: โโ โโ โโ โโ โโ Direct materials Direct labor Manufacturing overhead Related to product like insurance on the factory producing Salary of a supervisor overseeing production INDIRECT Why called “product”? Because they attach to the product and sit in inventory until the product is sold. Period costs Period costs = costs that are expensed in the period incurred (they do not attach to inventory).โ Slides define them as: โโ Selling costs โโ Administrative costs โ Final exam rule: โโ If it’s a manufacturing cost → product cost โโ If it’s selling/admin → period cost 7) Manufacturing Inventory Accounts + Cost Flow (VERY TESTED) Manufacturers track product costs through 3 inventory accounts: 1.โ Raw Materials (RM): materials not yet used 2.โ Work in Process (WIP): partially completed products 3.โ Finished Goods (FG): completed products not yet sold Transfer of product costs (must know sequence) 1.โ When materials are used: โโ RM → WIP (direct materials move into production) 2.โ As production happens: โโ Direct labor + MOH are added to WIP (these costs build the product) 3.โ When goods are completed: โโ WIP → FG 4.โ When goods are sold: โโ FG → Cost of Goods Sold (COGS)โ Brewer9e_Chap01_PPT[1] โ Final flow to memorize:โ RM → WIP → FG → COGS Concept Check 1 (Period vs Product) — FULL ANSWERS Question: Which are period costs? Brewer9e_Chap01_PPT[1] Options: โโ โโ โโ โโ โโ Manufacturing equipment depreciation → Product cost (MOH) Property taxes on corporate headquarters → Period cost (admin) Direct materials costs → Product cost (DM) Electrical costs to light production facility → Product cost (MOH) Sales commissions → Period cost (selling) โ Final answers:โ โ โ Property taxes on corporate HQ and sales commissions are period costs. 8) Predicting Cost Behavior (Learning Objective 4) What is “cost behavior”? Cost behavior = how a cost changes when the level of activity changes. Brewer9e_Chap01_PPT[1] โ Activity could mean: units produced, miles driven, machine hours, labor hours, etc. Activity base (Cost driver) A cost driver is a measure of what causes a cost to be incurred (especially variable costs). Brewer9e_Chap01_PPT[1] โ Examples: โโ Units produced โโ Machine hours โโ Miles driven A) Variable Cost A variable cost changes in total in direct proportion to activity. Key properties: โโ Total variable cost increases as activity increases โโ Variable cost per unit stays constant Example idea:โ If variable cost per unit is $5: โโ 10 units → $50 โโ 20 units → $100 โ Final exam line:โ Variable in total, constant per unit. B) Fixed Cost A fixed cost remains constant in total regardless of activity (within a relevant range). Key property: โโ Total fixed cost stays flat โโ Fixed cost per unit decreases as activity increases (because you spread the same total over more units) โ Final exam line:โ Fixed in total, variable per unit. Types of fixed costs Insurance, advertising, salary, Depreciation Discretionary fixed costs Can be changed in the short term by management decisions. โ Example vibe: advertising, training budgets. Committed fixed costs Long-term, cannot be significantly reduced in the short term. โ Example vibe: long-term lease, major equipment. The economist’s curvilinear cost function + linearity assumption Reality: costs can be curved (not perfectly straight). โ But in managerial accounting we often use a linearity assumption: โโ Within a relevant range, we approximate costs as linear (straight line) because it’s practical for planning. Relevant Range (very tested) Relevant range = the range of activity where the cost behavior assumptions are valid. Example from slides: office rent available in chunks: โโ $30,000 per year per 1,000 square feetโ โ โ This creates step-fixed costs: rent stays flat, then jumps when you need more space. โ Final definition from slides:โ For fixed costs, the relevant range is the activity range over which the cost graph is flat. C) Mixed Cost A mixed cost has both: โโ Fixed part โโ Variable part Utility example structure: โโ Fixed monthly utility charge โโ Plus variable cost per kilowatt hour Mixed cost formula (must know) Total mixed cost = Fixed cost + (Variable rate × Activity) Mixed cost example (slides) Fixed = $40โ Variable rate = $0.03 per kWhโ Activity = 2,000 kWh Calculation: โโ Variable portion = 0.03 × 2,000 = 60 โโ Total = 40 + 60 = $100 โ Final answer: Utility bill = $100. Concept Check 2 (Variable costs at Baskin & Robbins) — FULL ANSWERS Variable with respect to number of cones sold: โโ โโ โโ โโ Cost of lighting store → usually fixed (not variable per cone) Wages of store manager → fixed Cost of ice cream → variable Cost of napkins → variable โ โ โ Final answers: Ice cream and napkins are variable. 9) Cost Classifications for Decision Making (Learning Objective 5) Why this matters Decisions mean choosing between alternatives.โ To decide correctly, you separate: โโ Relevant costs (matter) โโ Irrelevant costs (don’t matter) Differential (Incremental) Costs and Revenues Differential cost = difference in cost between two alternatives.โ Differential revenue = difference in revenue between two alternatives. Key rule from slides: โโ Differential costs and revenues are always relevant.โ โ They can be fixed or variable — what makes them relevant is that they change between options. โ Final exam rule:โ If it differs between alternatives, it’s relevant (differential). Opportunity Cost (decision-making version) Opportunity cost = the benefit you give up when choosing one option over the next best alternative. โ Important: Opportunity costs are usually not in accounting records, so managers must actively think about them. Example prompt from slides:โ For students, opportunity cost of attending class = best alternative use of that time (work shift, studying, sleep, etc.). โ Final exam line:โ Opportunity costs are real economic costs even if they don’t appear in the ledger. Sunk Costs Sunk costs = already incurred and cannot be changed now or in the future. โ Rule: โโ Sunk costs are irrelevant and should be ignored in decisions. โ Final exam rule:โ If you can’t change it, ignore it for the choice. Train vs Drive Concept Checks (3, 4, 5) — FULL ANSWERS + WHY Concept Check 3: Is the train ticket cost relevant? If you’re deciding drive vs train, the train ticket cost occurs only if you pick train, so it differs between alternatives. โ Final answer: Yes, relevant (it’s differential). Concept Check 4: Is annual car licensing cost relevant? Annual licensing is paid regardless of whether you drive to this concert or take the train. It does not change between alternatives. โ Final answer: No, not relevant (not differential). Concept Check 5: If the car could be sold now for $5,000, is this a sunk cost? If you can sell it now, that value is recoverable; it represents an opportunity you could take. Therefore it’s not sunk. โ Final answer: No, it is not a sunk cost. 10) Income Statements: Traditional vs Contribution (Learning Objective 6) Traditional format (external-style) Groups costs by function (what department/activity they belong to), like: โโ Cost of goods sold โโ Selling expenses โโ Administrative expenses Used commonly for external reporting. Contribution format (manager/internal tool) The contribution income statement is used internally for planning/decision-making. Sales-Total Variable = Contribution Margin โ It supports later topics, including: โโ โโ โโ โโ Cost-volume-profit (CVP) analysis (Chapter 6) Segmented reporting (Chapter 7) Budgeting (Chapter 8) Special decisions (pricing, make-or-buy) (Chapter 11) โ Final takeaway:โ Traditional = functional categories; Contribution = built for analyzing behavior/decisions. ๐ง Chapter 1 Master Sheet (what to memorize) Core definitions โโ โโ โโ โโ โโ โโ โโ โโ โโ Direct vs indirect vs common costs DM, DL, MOH Prime = DM + DL Conversion = DL + MOH Product vs period costs RM → WIP → FG → COGS Variable vs fixed vs mixed Relevant = differential + future; Irrelevant = sunk/non-differential Opportunity cost = next best alternative benefit forgone Concept check answers (quick) โโ Period costs: corporate HQ taxes, sales commissions โโ Variable at ice cream shop: ice cream, napkins โโ Train ticket relevant: Yes โโ Car license relevant: No โโ Car resell value sunk? No โโ โ Chapter 1 In-Class Problems (Costs, Behavior, Contribution Margin, Relevant Range) ๐ง ๐ 1) Core idea: Product vs. Period Costs (EXAM FAVORITE) โ Product (inventoriable) costs = “cost to make the product.”โ These go into inventory first (RM → WIP → FG) and only become an expense when sold (COGS). Product costs (manufacturing): โโ Direct Materials (DM)โ โโ Direct Labor (DL)โ โโ Manufacturing Overhead (MOH)โ โโ Variable MOHโ โโ Fixed MOHโ Period costs = “cost to sell + run the business.”โ Expensed immediately in the period incurred. โโ Selling expenses (ex: sales commissions, advertising)โ โโ Administrative expenses (office costs, admin salaries)โ 2) Variable vs. Fixed (and why “relevant range” matters) ๐๐ Variable cost: total changes with activity, but per unit stays constant.โ Fixed cost: total stays constant (within relevant range), but per unit changes. Relevant range: the “normal operating range” where our cost assumptions hold. If you go outside it, fixed costs can jump (step costs). โ Now we SOLVE the key questions while learning (Martinez Instruments-style) โ๏ธ๐งฎ Given (per unit at 10,000 units) Manufacturing (product) โโ DM = 5.50โ โโ DL = 3.00โ โโ Var MOH = 1.50โ โโ Fixed MOH = 4.00 (this is average fixed at 10k units)โ Selling & Admin (period) โโ Fixed selling = 2.50 (average fixed at 10k)โ โโ Fixed admin = 2.00 (average fixed at 10k)โ โโ Sales commissions = 1.00 (variable)โ โโ Variable admin = 0.50 (variable)โ Relevant range: 7,500 to 12,500 unitsโ Selling price: 21.50 ๐ฅ Q1) Total product costs to MAKE 10,000 units Product cost per unit (absorption) = DM + DL + Var MOH + Fixed MOH โโ = 5.50 + 3.00 + 1.50 + 4.00 = 14.00 per unitโ Total product cost = 14.00 × 10,000 = 140,000 โ Answer: 140,000 ๐ฅ Q2) Total period costs to SELL 10,000 units Period costs include selling + admin (both fixed + variable): โโ Fixed selling: 2.50 × 10,000 = 25,000โ โโ Fixed admin: 2.00 × 10,000 = 20,000โ โโ Sales commissions: 1.00 × 10,000 = 10,000โ โโ Variable admin: 0.50 × 10,000 = 5,000โ Total period costs = 25,000 + 20,000 + 10,000 + 5,000 = 60,000 โ Answer: 60,000 ๐ฅ Q3/Q4) Variable cost per unit produced AND sold This means include: โโ Variable manufacturing (DM + DL + Var MOH)โ โโ Variable selling/admin (commissions + var admin)โ Variable manufacturing per unit = 5.50 + 3.00 + 1.50 = 10.00โ Add variable period costs = 1.00 + 0.50 = 1.50 Total variable cost per unit = 10.00 + 1.50 = 11.50 โ Answer: 11.50 per unit ๐ฅ Q5/Q6) Total variable costs at 8,000 and 12,500 units Total variable = 11.50 × units โโ At 8,000: 11.50 × 8,000 = 92,000โ โโ At 12,500: 11.50 × 12,500 = 143,750โ โ Answers: 92,000 and 143,750 ๐ฅ Q7) Average fixed manufacturing cost per unit at 8,000 units Important trick: Fixed total stays the same, but per unit changes. We’re told fixed MOH is 4.00 per unit at 10,000, so:โ Total fixed MOH = 4.00 × 10,000 = 40,000 Average fixed MOH per unit at 8,000:โ 40,000 ÷ 8,000 = 5.00 โ Answer: 5.00 per unit ๐ฅ Q8) Average fixed manufacturing cost per unit at 12,500 units Same fixed total 40,000, more units: 40,000 ÷ 12,500 = 3.20 โ Answer: 3.20 per unit ๐ฅ Q9/Q10) Total fixed manufacturing cost at 8,000 and 12,500 units Fixed total doesn’t change (within relevant range): โ Answer: 40,000 for BOTH ๐ฅ Q11) Total manufacturing overhead cost at 8,000 units MOH = variable MOH + fixed MOH Variable MOH = 1.50 × 8,000 = 12,000โ Fixed MOH = 40,000โ Total MOH = 52,000 โ Answer: 52,000 ๐ฅ Q12) Manufacturing overhead cost PER UNIT at 8,000 units 52,000 ÷ 8,000 = 6.50 per unit โ Answer: 6.50 ๐ฅ Q13) Contribution margin per unit (VERY EXAM FAVORITE) ๐ฅ Contribution Margin (CM) = Selling price − Variable costs CM = 21.50 − 11.50 = 10.00 โ Answer: 10.00 per unit ๐ฅ Q14) Total direct + indirect manufacturing costs at 11,000 units Direct manufacturing = DM + DL = 5.50 + 3.00 = 8.50 per unitโ Direct total = 8.50 × 11,000 = 93,500 Indirect manufacturing = MOH = Var MOH + Fixed MOHโ Var MOH = 1.50 × 11,000 = 16,500โ Fixed MOH = 40,000โ Indirect total = 56,500 โ Answers: โโ Direct manufacturing: 93,500โ โโ Indirect manufacturing: 56,500โ ๐ฅ Q15) Incremental manufacturing cost of making the 10,001st unit Incremental = additional cost for ONE more unitโ Within relevant range, fixed costs don’t change → incremental cost is variable manufacturing per unit: DM + DL + Var MOH = 5.50 + 3.00 + 1.50 = 10.00 โ Answer: 10.00
0
You can add this document to your study collection(s)
Sign in Available only to authorized usersYou can add this document to your saved list
Sign in Available only to authorized users(For complaints, use another form )