Chapter 9: Phase Diagrams ISSUES TO ADDRESS... • When we combine two elements... what is the resulting equilibrium state? • In particular, if we specify... -- the composition (e.g., wt% Cu - wt% Ni), and -- the temperature (T ) then... How many phases form? What is the composition of each phase? What is the amount of each phase? Phase B Phase A Nickel atom Copper atom Chapter 9 - 1 Definitions and Basic Concepts • Components: pure metals and/or compounds of which an alloy is composed. • Example: in a copper–zinc brass, the components are Cu and Zn. https://en.wikipedia.org/wiki/Brass#/media/File:00_BMA_Automat ion_Sampling_cock.JPG Chapter 9 - 2 Definitions and Basic Concepts System: – a specific body of material under consideration (e.g., a ladle of molten steel) – the series of possible alloys consisting of the same components but without regard to alloy composition (e.g., the iron–carbon system). Chapter 9 - 3 Solute and Solvent • When one substance dissolves into another, a solution is formed. • A solution is a homogeneous mixture consisting of a solute dissolved into a solvent. https://chem.libretexts.org/Bookshelves/Introductory_Chemistry/Introductory_Chemistry_(CK12)/15%3A_Water/15.04%3A_Solute_and_Solvent Chapter 9 - 4 Solid Solution Two outcomes if impurity (B) added to host (A): • Solid solution of B in A (i.e., random dist. of point defects) OR Substitutional solid soln. (e.g., Cu in Ni) Interstitial solid soln. (e.g., C in Fe) • Solid solution of B in A plus particles of a new phase (usually for a larger amount of B) Second phase particle -- different composition -- often different structure. Chapter 9 - 5 Solubility Limit • Solution – solid, liquid, or gas solutions, single phase • Mixture – more than one phase Adapted from Fig. 9.1, Callister & Rethwisch 8e. Sugar/Water Phase Diagram • Solubility Limit: (liquid) 60 L 40 (liquid solution i.e., syrup) 20 Answer: 65 wt% sugar. At 20ºC, if C < 65 wt% sugar: syrup At 20ºC, if C > 65 wt% sugar: syrup + sugar L 0 + S (solid sugar) 20 40 6065 80 100 C = Composition (wt% sugar) Sugar solubility limit for sugar in water at 20ºC? Solubility Limit 80 Water Question: What is the Temperature (ºC) Maximum concentration for which only a single phase solution exists. 100 Chapter 9 - 6 Components and Phases • Components: The elements or compounds which are present in the alloy (e.g., Al and Cu) • Phases: The physically and chemically distinct material regions that form (e.g., and ). AluminumCopper Alloy Adapted from chapteropening photograph, Chapter 9, Callister, Materials Science & Engineering: An Introduction, 3e. (lighter phase) (darker phase) Chapter 9 - 7 H2O Phase Diagram Adapted from Fig. 9.0, Callister & Rethwisch 8e. Chapter 9 - 8 Homogeneous vs Heterogeneous • Sometimes, a single-phase system is termed homogeneous. • Systems composed of two or more phases are termed mixtures or heterogeneous systems. • Most metallic alloys and, for that matter, ceramic, polymeric, and composite systems are heterogeneous Chapter 9 - 9 PHASE EQUILIBRIA • Equilibrium: best described in terms of a thermodynamic quantity called the free energy. • Free energy: a function of the internal energy of a system and also the randomness or disorder of the atoms or molecules (or entropy). • A system is at equilibrium if its free energy is at a minimum under some specified combination of temperature, pressure, and composition. Chapter 9 - 10 PHASE EQUILIBRIA • In a macroscopic sense: the characteristics of the system do not change with tim, the system is stable. – A change in temperature, pressure, and/or composition: results in an increase in the free energy and in a possible spontaneous change to another state by which the free energy is lowered Chapter 9 - 11 Effect of Temperature & Composition • Altering T can change # of phases: path A to B. • Altering C can change # of phases: path B to D. B (100ºC,C = 70) D (100ºC,C = 90) 1 phase watersugar system Adapted from Fig. 9.1, Callister & Rethwisch 8e. Temperature (ºC) 100 2 phases L 80 (liquid) 60 L (liquid solution 40 i.e., syrup) + S (solid sugar) A (20ºC,C = 70) 20 2 phases 0 0 20 40 60 70 80 100 C = Composition (wt% sugar) Chapter 9 - 12 • A metastable state or microstructure may persist indefinitely, experiencing only extremely slight and almost imperceptible changes as time progresses. – Extremely slow rate • For example, some steel and aluminum alloys rely for their strength on the development of metastable microstructures during carefully designed heat treatments Chapter 9 - 13 One Component Phase Diagram Pressure–temperature phase diagram for H2O Fig. 9.2, Callister & Rethwisch 8e. Chapter 9 - 14 Binary Phase Diagrams • Indicate phases as a function of T, C, and P. • For this course: - binary systems: just 2 components. - independent variables: T and C (P = 1 atm is almost always used). T(ºC) Phase Diagram for Cu-Ni system • 2 phases: 1600 1500 L (liquid) (FCC solid solution) L (liquid) 1400 1300 (FCC solid solution) 1200 1100 1000 0 20 40 60 80 • 3 different phase fields: L L+ Adapted from Fig. 9.3(a), Callister & Rethwisch 8e. (Fig. 9.3(a) is adapted from Phase Diagrams of Binary Nickel Alloys, P. Nash (Ed.), ASM International, Materials Park, OH (1991). 100 wt% Ni Chapter 9 - 15 Isomorphous Binary Phase Diagram • Phase diagram: T(ºC) Cu-Ni system. 1600 • System is: 1500 L (liquid) -- binary i.e., 2 components: Cu and Ni. -- isomorphous i.e., complete solubility of one component in another; phase field extends from 0 to 100 wt% Ni. Cu-Ni phase diagram 1400 1300 (FCC solid solution) 1200 1100 1000 0 20 40 60 80 100 wt% Ni Adapted from Fig. 9.3(a), Callister & Rethwisch 8e. (Fig. 9.3(a) is adapted from Phase Diagrams of Binary Nickel Alloys, P. Nash (Ed.), ASM International, Materials Park, OH (1991). Chapter 9 - 16 Phase Diagrams: Determination of phase(s) present • Rule 1: If we know T and Co, then we know: -- which phase(s) is (are) present. A(1100ºC, 60 wt% Ni): 1 phase: B(1250ºC, 35 wt% Ni): 2 phases: L + 1600 L (liquid) B (1250ºC,35) • Examples: T(ºC) 1500 1400 1300 A(1100ºC,60) 1100 1000 (FCC solid solution) 1200 Adapted from Fig. 9.3(a), Callister & Rethwisch 8e. (Fig. 9.3(a) is adapted from Phase Diagrams of Binary Nickel Alloys, P. Nash (Ed.), ASM International, Materials Park, OH (1991). Cu-Ni phase diagram 0 20 40 60 80 100 wt% Ni Chapter 9 - 17 Phase Diagrams: Determination of phase compositions • Rule 2: If we know T and C0, then we can determine: -- the composition of each phase. • Examples: Consider C0 = 35 wt% Ni At TA = 1320ºC: Only Liquid (L) present CL = C0 ( = 35 wt% Ni) At TD = 1190ºC: Only Solid () present C = C0 ( = 35 wt% Ni) At TB = 1250ºC: Both and L present CL = C liquidus ( = 32 wt% Ni) C = C solidus ( = 43 wt% Ni) Cu-Ni system T(ºC) A TA 1300 TB 1200 TD 20 tie line L (liquid) B D 3032 35 CL C0 (solid) 4043 50 C wt% Ni Adapted from Fig. 9.3(a), Callister & Rethwisch 8e. (Fig. 9.3(a) is adapted from Phase Diagrams of Binary Nickel Alloys, P. Nash (Ed.), ASM International, Materials Park, OH (1991). Chapter 9 - 18 Phase Diagrams: Determination of phase weight fractions • Rule 3: If we know T and C0, then can determine: -- the weight fraction of each phase. • Examples: Consider C0 = 35 wt% Ni At TA : Only Liquid (L) present WL = 1.00, W = 0 At TD : Only Solid ( ) present WL = 0, W = 1.00 At TB : Both and L present WL = W = S R +S = 43 − 35 = 0.73 43 − 32 R = 0.27 R +S Cu-Ni system T(ºC) A TA 1300 tie line L (liquid) TB B R S 1200 TD D 20 3032 35 CL C 0 (solid) 40 43 50 C wt% Ni Adapted from Fig. 9.3(a), Callister & Rethwisch 8e. (Fig. 9.3(a) is adapted from Phase Diagrams of Binary Nickel Alloys, P. Nash (Ed.), ASM International, Materials Park, OH (1991). Chapter 9 - 19 The Lever Rule • Tie line – connects the phases in equilibrium with each other – also sometimes called an isotherm T(ºC) What fraction of each phase? Think of the tie line as a lever (teeter-totter) tie line 1300 L (liquid) B TB (solid) 1200 R 20 30CL S C0 40 C wt% Ni WL = M ML 50 Adapted from Fig. 9.3(b), Callister & Rethwisch 8e. C − C0 ML S = = ML + M R + S C − CL R S M x S = ML x R W = C − CL R = 0 R + S C − CL Chapter 9 - 20 Ex: Cooling of a Cu-Ni Alloy • Phase diagram: Cu-Ni system. • Consider microstuctural changes that accompany the cooling of a T(ºC) L (liquid) 130 0 L: 35 wt% Ni : 46 wt% Ni C0 = 35 wt% Ni alloy L: 35wt%Ni Cu-Ni system A 35 32 B C 46 43 D 24 L: 32 wt% Ni 36 120 0 : 43 wt% Ni E L: 24 wt% Ni : 36 wt% Ni (solid) 110 0 20 30 Adapted from Fig. 9.4, Callister & Rethwisch 8e. 35 C0 40 50 wt% Ni Chapter 9 - 21 Cored vs Equilibrium Structures • C changes as we solidify. • Cu-Ni case: First to solidify has C = 46 wt% Ni. Last to solidify has C = 35 wt% Ni. • Slow rate of cooling: Equilibrium structure Uniform C: 35 wt% Ni • Fast rate of cooling: Cored structure First to solidify: 46 wt% Ni Last to solidify: < 35 wt% Ni Chapter 9 - 22 Mechanical Properties: Cu-Ni System • Effect of solid solution strengthening on: -- Ductility (%EL) 400 TS for pure Ni 300 TS for pure Cu 200 0 20 40 Cu 60 80 100 Ni Composition, wt% Ni Adapted from Fig. 9.6(a), Callister & Rethwisch 8e. Elongation (%EL) Tensile Strength (MPa) -- Tensile strength (TS) 60 %EL for pure Cu %EL for pure Ni 50 40 30 20 0 20 Cu 40 60 80 100 Ni Composition, wt% Ni Adapted from Fig. 9.6(b), Callister & Rethwisch 8e. Chapter 9 - 23 Binary-Eutectic Systems has a special composition with a min. melting T. 2 components Ex.: Cu-Ag system Cu-Ag system T(ºC) 1200 • 3 single phase regions L (liquid) 1000 (L, , ) L + 779ºC • Limited solubility: TE 800 8.0 : mostly Cu : mostly Ag 600 • TE : No liquid below TE + 400 • CE : Composition at temperature TE 200 • Eutectic reaction 20 (CE) + (CE) L(CE) L(71.9 wt% Ag) 0 cooling heating 40 L+ 71.9 91.2 60 CE 80 100 C, wt% Ag Adapted from Fig. 9.7, Callister & Rethwisch 8e. (8.0 wt% Ag) + (91.2 wt% Ag) Chapter 9 - 24 EX 1: Pb-Sn Eutectic System • For a 40 wt% Sn-60 wt% Pb alloy at 150ºC, determine: -- the phases present Answer: + -- the phase compositions Answer: C = 11 wt% Sn C = 99 wt% Sn -- the relative amount of each phase Pb-Sn system T(ºC) 300 L (liquid) 200 L+ L+ 183ºC 18.3 61.9 97.8 150 Answer: R S C - C0 S 100 = W = + R+S C - C 99 - 40 59 = = = 0.67 99 - 11 88 0 11 20 60 80 99100 40 C C C0 C0 - C R C, wt% Sn W = = Adapted from Fig. 9.8, C - C R+S Callister & Rethwisch 8e. = 40 - 11 29 = = 0.33 99 - 11 88 Chapter 9 - 25 EX 2: Pb-Sn Eutectic System • For a 40 wt% Sn-60 wt% Pb alloy at 220ºC, determine: -- the phases present: Answer: + L -- the phase compositions Answer: C = 17 wt% Sn CL = 46 wt% Sn -- the relative amount of each phase Pb-Sn system T(ºC) 300 220 200 L (liquid) L+ R L+ S 183ºC Answer: CL - C0 46 - 40 = W = CL - C 46 - 17 6 = = 0.21 29 C0 - C 23 = = 0.79 WL = CL - C 29 100 + 0 17 20 C 40 46 60 C0 CL 80 C, wt% Sn Adapted from Fig. 9.8, Callister & Rethwisch 8e. Chapter 9 - 26 100 Microstructural Developments in Eutectic Systems I • For alloys for which C0 < 2 wt% Sn • Result: at room temperature -- polycrystalline with grains of phase having composition C0 T(ºC) 400 L L 300 200 TE 100 Adapted from Fig. 9.11, Callister & Rethwisch 8e. L: C0 wt% Sn L+ : C0 wt% Sn (Pb-Sn System) + 0 10 20 30 C0 C , wt% Sn 2 (room T solubility limit) Chapter 9 - 27 Microstructural Developments in Eutectic Systems II • For alloys for which 400 2 wt% Sn < C0 < 18.3 wt% Sn • Result: at temperatures in + range 300 -- polycrystalline with grains and small -phase particles 200 L: C0 wt% Sn T(ºC) L L+ TE : C0 wt% Sn 100 Adapted from Fig. 9.12, Callister & Rethwisch 8e. L + 0 10 20 Pb-Sn system 30 C0 C, wt% Sn 2 (sol. limit at T room ) 18.3 (sol. limit at TE) Chapter 9 - 28 Microstructural Developments in Eutectic Systems III • For alloy of composition C0 = CE • Result: Eutectic microstructure (lamellar structure) -- alternating layers (lamellae) of and phases. T(ºC) L: C0 wt% Sn 300 Pb-Sn system 200 L+ L L+ 183ºC TE 100 + 0 20 18.3 Adapted from Fig. 9.13, Callister & Rethwisch 8e. Micrograph of Pb-Sn eutectic microstructure 40 : 97.8 wt% Sn : 18.3 wt%Sn 60 CE 61.9 80 160 m Adapted from Fig. 9.14, Callister & Rethwisch 8e. 100 97.8 C, wt% Sn Chapter 9 - 29 Lamellar Eutectic Structure Adapted from Figs. 9.14 & 9.15, Callister & Rethwisch 8e. Chapter 9 - 30 Microstructural Developments in Eutectic Systems IV • For alloys for which 18.3 wt% Sn < C0 < 61.9 wt% Sn • Result: phase particles and a eutectic microconstituent L: C0 wt% Sn L T(ºC) 300 L Pb-Sn system 200 TE R 100 + 0 L+ R 20 18.3 Adapted from Fig. 9.16, Callister & Rethwisch 8e. L L+ S S 60 61.9 C = 18.3 wt% Sn CL = 61.9 wt% Sn S = 0.50 = W R+S WL = (1- W) = 0.50 • Just below TE : primary eutectic eutectic 40 • Just above TE : 80 C, wt% Sn 100 97.8 C = 18.3 wt% Sn C = 97.8 wt% Sn W = S = 0.73 R+S W = 0.27 Chapter 9 - 31 Hypoeutectic & Hypereutectic 300 L T(ºC) Adapted from Fig. 9.8, Callister & Rethwisch 8e. (Fig. 10.8 adapted from Binary Phase Diagrams, 2nd ed., Vol. 3, T.B. Massalski (Editor-in-Chief), ASM International, Materials Park, OH, 1990.) 200 L+ + 20 40 hypoeutectic: C0 = 50 wt% Sn (Pb-Sn System) 100 0 (Figs. 9.14 and 9.17 from Metals Handbook, 9th ed., Vol. 9, Metallography and Microstructures, American Society for Metals, Materials Park, OH, 1985.) L+ TE 60 80 eutectic 61.9 hypereutectic: (illustration only) Adapted from Fig. 9.17, Callister & Rethwisch 8e. C, wt% Sn eutectic: C0 = 61.9 wt% Sn 175 m 100 160 m eutectic micro-constituent Adapted from Fig. 9.14, Callister & Rethwisch 8e. Adapted from Fig. 9.17, Callister & Rethwisch 8e. (Illustration only) Chapter 9 - 32 Intermetallic Compounds Adapted from Fig. 9.20, Callister & Rethwisch 8e. Mg2Pb Note: intermetallic compound exists as a line on the diagram - not an area - because of stoichiometry (i.e. composition of a compound Chapter 9 - 33 is a fixed value). Eutectic, Eutectoid, & Peritectic • Eutectic - liquid transforms to two solid phases L cool + (For Pb-Sn, 183ºC, 61.9 wt% Sn) heat • Eutectoid – one solid phase transforms to two other solid phases intermetallic compound - cementite S2 S1+S3 cool + Fe3C (For Fe-C, 727ºC, 0.76 wt% C) heat • Peritectic - liquid and one solid phase transform to a second solid phase S1 + L S2 +L cool heat (For Fe-C, 1493ºC, 0.16 wt% C) Chapter 9 - 34 Eutectoid & Peritectic Peritectic transformation + L Cu-Zn Phase diagram Eutectoid transformation + Adapted from Fig. 9.21, Callister & Rethwisch 8e. Chapter 9 - 35 Iron-Carbon (Fe-C) Phase Diagram • 2 important points - Eutectic (A): T(ºC) 1600 L 1400 +L A 1200 1148ºC (austenite) - Eutectoid (B): + Fe3C 1000 +Fe3C 800 727ºC = T eutectoid B +Fe3C 600 120 m Result: Pearlite = alternating layers of and Fe3C phases (Adapted from Fig. 9.27, Callister & Rethwisch 8e.) 400 0 1 0.76 (Fe) L+Fe3C 2 3 4 4.30 5 6 Fe3C (cementite) L + Fe3C 6.7 C, wt% C Fe3C (cementite-hard) (ferrite-soft) Adapted from Fig. 9.24, Callister & Rethwisch 8e. Chapter 9 - 36 Hypoeutectoid Steel T(ºC) 1600 L +L 1200 (austenite) 1000 + Fe3C 800 727ºC + Fe3C 600 pearlite 1 0.76 400 0 (Fe)C0 L+Fe3C 1148ºC 2 3 4 5 6 6.7 Adapted from Figs. 9.24 and 9.29,Callister & Rethwisch 8e. (Fig. 9.24 adapted from Binary Alloy Phase Diagrams, 2nd ed., Vol. 1, T.B. Massalski (Ed.-inChief), ASM International, Materials Park, OH, 1990.) C, wt% C 100 m pearlite (Fe-C System) Fe3C (cementite) 1400 Hypoeutectoid steel proeutectoid ferrite Adapted from Fig. 9.30, Callister & Rethwisch 8e. Chapter 9 - 37 Hypoeutectoid Steel T(ºC) 1600 L +L 1200 (austenite) 1000 + Fe3C W = s/(r + s) 800 r s W =(1 - W) 727ºC RS + Fe3C 600 pearlite Wpearlite = W 400 0 (Fe)C0 1 0.76 L+Fe3C 1148ºC W’ = S/(R + S) WFe3C =(1 – W’) pearlite 2 3 4 5 6 (Fe-C System) Fe3C (cementite) 1400 6.7 Adapted from Figs. 9.24 and 9.29,Callister & Rethwisch 8e. (Fig. 9.24 adapted from Binary Alloy Phase Diagrams, 2nd ed., Vol. 1, T.B. Massalski (Ed.-inChief), ASM International, Materials Park, OH, 1990.) C, wt% C 100 m Hypoeutectoid steel proeutectoid ferrite Adapted from Fig. 9.30, Callister & Rethwisch 8e. Chapter 9 - 38 Hypereutectoid Steel T(ºC) 1600 L +L 1200 (austenite) 800 +Fe3C +Fe3C 600 400 0 (Fe) pearlite L+Fe3C 1148ºC 1000 0.76 Fe3C (Fe-C System) 1 C0 2 3 4 5 6 Fe3C (cementite) 1400 Adapted from Figs. 9.24 and 9.32,Callister & Rethwisch 8e. (Fig. 9.24 adapted from Binary Alloy Phase Diagrams, 2nd ed., Vol. 1, T.B. Massalski (Ed.-in-Chief), ASM International, Materials Park, OH, 1990.) 6.7 C, wt%C 60 mHypereutectoid steel pearlite proeutectoid Fe3C Adapted from Fig. 9.33, Callister & Rethwisch 8e. Chapter 9 - 39 Hypereutectoid Steel T(ºC) 1600 L +L 1200 (austenite) W =x/(v + x) WFe3C =(1-W) +Fe3C v x 800 V 600 pearlite 400 0 (Fe) Wpearlite = W L+Fe3C 1148ºC 1000 X 0.76 Fe3C (Fe-C System) 1 C0 W = X/(V + X) +Fe3C 2 3 4 5 6 Fe3C (cementite) 1400 Adapted from Figs. 9.24 and 9.32,Callister & Rethwisch 8e. (Fig. 9.24 adapted from Binary Alloy Phase Diagrams, 2nd ed., Vol. 1, T.B. Massalski (Ed.-in-Chief), ASM International, Materials Park, OH, 1990.) 6.7 C, wt%C 60 mHypereutectoid steel WFe C’ =(1 - W) 3 pearlite proeutectoid Fe3C Adapted from Fig. 9.33, Callister & Rethwisch 8e. Chapter 9 - 40 Example Problem For a 99.6 wt% Fe-0.40 wt% C steel at a temperature just below the eutectoid, determine the following: a) The compositions of Fe3C and ferrite (). b) The amount of cementite (in grams) that forms in 100 g of steel. c) The amounts of pearlite and proeutectoid ferrite () in the 100 g. Chapter 9 - 41 Solution to Example Problem a) Using the RS tie line just below the eutectoid C = 0.022 wt% C CFe3C = 6.70 wt% C WFe 3C = = R C − C = 0 R + S CFe 3C − C 0.40 − 0.022 = 0.057 6.70 − 0.022 1600 L 1400 T(ºC) 1200 +L 1000 Amount of Fe3C in 100 g = (100 g)WFe3C = (100 g)(0.057) = 5.7 g L+Fe3C 1148ºC (austenite) Fe C (cementite) b) Using the lever rule with the tie line shown + Fe3C 800 727ºC R S + Fe3C 600 400 0 C C0 1 2 3 4 5 6 C , wt% C 6.7 CFe C 3 Chapter 9 - 42 Solution to Example Problem (cont.) c) Using the VX tie line just above the eutectoid and realizing that C0 = 0.40 wt% C C = 0.022 wt% C Cpearlite = C = 0.76 wt% C 1600 = V C − C = 0 V + X C − C 0.40 − 0.022 = 0.512 0.76 − 0.022 Amount of pearlite in 100 g = (100 g)Wpearlite T(ºC) 1200 +L L+Fe3C 1148ºC (austenite) 1000 + Fe3C 800 727ºC VX + Fe3C 600 400 0 1 C C0 C = (100 g)(0.512) = 51.2 g 2 3 4 5 6 C, wt% C Chapter 9 - 43 Fe C (cementite) Wpearlite = L 1400 6.7 VMSE: Interactive Phase Diagrams Microstructure, phase compositions, and phase fractions respond interactively Change alloy composition Chapter 9 - 44 Alloying with Other Elements Ti Mo Si W Cr Mn Ni • Ceutectoid changes: Ceutectoid (wt% C) T Eutectoid (ºC) • Teutectoid changes: Ni Cr Si Ti Mo W Mn wt. % of alloying elements wt. % of alloying elements Adapted from Fig. 9.34,Callister & Rethwisch 8e. (Fig. 9.34 from Edgar C. Bain, Functions of the Alloying Elements in Steel, American Society for Metals, 1939, p. 127.) Adapted from Fig. 9.35,Callister & Rethwisch 8e. (Fig. 9.35 from Edgar C. Bain, Functions of the Alloying Elements in Steel, American Society for Metals, 1939, p. 127.) Chapter 9 - 45 Summary • Phase diagrams are useful tools to determine: -- the number and types of phases present, -- the composition of each phase, -- and the weight fraction of each phase given the temperature and composition of the system. • The microstructure of an alloy depends on -- its composition, and -- whether or not cooling rate allows for maintenance of equilibrium. • Important phase diagram phase transformations include eutectic, eutectoid, and peritectic. Chapter 9 - 46
0
You can add this document to your study collection(s)
Sign in Available only to authorized usersYou can add this document to your saved list
Sign in Available only to authorized users(For complaints, use another form )