Common Electrical Problems Everyone Must Know
Electrical issues are unpredictable that can occur without any prior
warning signs as they are hiding behind your walls. To learn about
intercepting these unwanted electrical events is essential to prevent
facing more expensive issues. One must think of protection to the
advanced and complex electrical/ electronic devices/ circuitries both
indoors and outdoors with proper ​Earthing system​ installation,
lightning protection system and surge protection devices.
As your facility ages so does your wiring and electrical installations. So,
it is prerequisite to inspect the complete electric network to see if the
insulation is intact or not, Connections are loose or not, Outlet life or if
the electrical code/ regulations are outdated or not, etc. Unfolding
some of the most common electric problems that arise and its
solutions.
Fault Earthing or Grounding Installation:
Highly sensitive and
sophisticated
machineries can
cause electrocution
or any other such
hazard if the
exposed parts of
the sensitive
equipments to the
conducting earth
mass utilizing a ground rod/ electrode that provides zero potential
surface around. ​Solve it: ​Maintenance Free Earthing System
recommended as per IS 3043 and NBC 2016 is the most important
installation for your electric network as it is a reliable and durable
technique involving copper bonded rods as the conductor surrounded
by earth enhancement compound with joints made using
exothermically welded joint. This setup is proven technology fair
enough for phenomenal protection for more than 25 years.
Adopting Lightning Safety Measures:
Lightning is the
deadliest hazard
known to us that can
hit on any particle,
person or structure
on the ground. It can
encroach inside your
facility via the
transmission lines or
telecom lines and
cause electric system damages and initiate fire hazard.
Solve it – you must have a lightning arrestor and downconductor
network for the protection of your building structure along with
incorporation of appropriate transient suppression unit at
equipment level.
Overloads, Power Sags or Dips:
You may notice severe damages of our equipments in our households
and workplaces which is mainly due to power surges i.e. increase in
previously steady voltage.
Solve it - What you need to do is, simply plug your accessory into
specific surge protector as they are able to block the surges and are
paved down into the earth in turn protecting your resources. ​Surge
Protection Device​ implanted in between the device and the main
circuit board can tackle main creators of surges: Lightning strikes and
Switching effects.
Get in Touch:
Email: ​contact@jmv.co.in
PH: ​+91 -120-4590000
Address: ​W-50, Sector-11, Noida -201301, Delhi NCR