ap console systems - Steven Engineering

advertisement
aus Rev 4
AP Console
Systems
AP CONSOLE SYSTEMS
11
8
10
13
12
■
9
4
3
2
6
5
■
14
7
■
1
Universal consoles
Console systems
1 Choice of short
or tall door. Short
door leaves space for
the installation of a
console (pictured) or a
keyboard drawer.
Unibody con4 struction offers
high stability and
protection rating.
8 Multi-variable
combinations,
see pages 156/157.
Each component may
be used individually
as part of a machine
or integrated into a
complete system.
Console can be
2 turned by 180°
to feature horizontal
or sloped working
surface.
5 One piece mounting panel across
the entire height of the
enclosure. C-folds on
the sides and various
installation options
along the 1″/25 mm
system hole pattern.
9 Bottom units with
mounting panels
come in two depths
and may also be used
as top units.
Interchangeable
cover panels,
one mounted with
screws from outside,
the other with bolts
from inside.
Universal inside
6 installation
options of partial
mounting panels,
component shelves,
chassis and rails with
tapped and square
holes in the 1″/25 mm
system hole pattern.
10 Center units
come in two
depths, with system
holes in the top or
bottom for easy
installation.
3
Freestanding consoles
11 Top units with
mounting panels
in three depths and
two heights for nearly
any installation need.
The AK compact
enclosures
(see page 84) may
be combined with
the consoles instead
of the top units.
12 Variable installation depth is
possible in the cover.
Cable entry offered
from the rear because
mounting panels can
be adjusted vertically
by 2 x 1.57″/40 mm.
14 Right hinged
door may be
reversed easily by
simply switching the
hinges to the other
side.
13 Cover with system
hole pattern for
cable management.
Safety catches secure
open lid.
Rear door opens
7 to the entire
height for easy access
to the components.
155
Rittal Handbook 30/Industrial Enclosure Systems
aus
Functionality and modularity are the cornerstones of Rittal’s AP console system. Their
design facilitates easy assembly and
provides better security and function. For
operator interfaces, demands on versatility,
functionality, aesthetics, and ergonomics
are at their highest. Operator interface
design is critical and the console plays a
key role. Only the best possible packaging
of modern, sensitive control equipment,
and the best ergonomics provide conditions that ensure efficient operation.
The AP console system, AP freestanding consoles and AP universal consoles
have the following approvals:
UL
CSA
TÜV
Germanischer Lloyd
Norske Veritas
Russian Maritime Register of Shipping
Lloyds Register of Shipping
VDE
AP console systems
US Patent No. 4,843,519
German Patent No. 38 65 047
European-Patent No. 0 281 895
affecting DE, ES, FR, GB, IT
Examples of the AP console systems combined with the Optipanel operator housing. Details starting on page 196.
AP console systems
Console top
Centers
AP freestanding consoles
Height
Width
inches/mm inches/mm
38/960
24 /600
38/960
32 /800
38/960
40/1000
38/960
48/1200
Bottoms
Depth
inches/mm
16/400; 19/480
16/400; 19/480
16/400; 19/480
16/400; 19/480
AP freestanding consoles – stainless steel
Height
Width
Depth
inches/mm inches/mm
inches/mm
38/960
24/ 600
16/400; 19/480
38/960
32/ 800
16/400; 19/480
38/960
40/1000
16/400; 19/480
38/960
48/1200
16/400; 19/480
AP universal consoles
Height
Width
Depth
inches/mm inches/mm inches/mm
51/1300
24/600
20/500
Cover panel
Pages
158/159
Doors
Part No. AP
Pages
1
1
2
2
2666.600
2668.600
2670.600
2672.600
164/165
164/165
164/165
164/165
Doors
Part No. AP
Pages
1
1
2
2
2683.600
2684.600
2685.600
2686.600
286/287
286/287
286/287
286/287
Part No. AP
short front door
2694.600
Part No. AP
tall front door
2695.600
AP universal consoles – stainless steel
Height
Width
Depth
Part No. AP
inches/mm inches/mm inches/mm short front door
51/1300
24/600
20/500
2688.600
Part No. AP
tall front door
2689.600
Stainless steel
AP freestanding
consoles
and
stainless steel
AP universal
consoles,
see pages 286 – 289.
Pages
166/167
Pages
288/289
154
Rittal Handbook 30/Industrial Enclosure Systems
Simply choose your combination
The different AP console system elements
are 16″/400 mm (blue) and 20″/500 mm
(red) deep and may be combined in a
number of user specified ways (see the
diagram below).
The table to the right will give you the
Part No. for your specific combination.
Flat HMI
(Human-Machine Interfaces)
screens or displays may also be used.
Many modern expansion
possibilities for the classic
AP console system are
built into the elegant
VIP 6000 Command Panel
CP Systems and the Optipanel
(yellow).
Cover plate (A2/B2) with reinforcement
and knockout for CP-L upon
special request.
Fastened from the inside:
Enclosure coupling CP 6525.500
Fastened from the outside:
Wall-floor bracket, small
CP 6520.500
VIP 6000, see pages 172 – 195
Optipanel, see pages 196 – 207
CP-L pendant arm systems,
see pages 242 – 255.
Please state dimensions of location on the
cover plate and Part No. of the bracket.
A2
A1
B7 1)2)
B2
A6
B11)
A5
A6
A6
A4
B4
A2
A2
A4
A4
CP
CP
A5
A2
A1
A5
A2
A1
A3
A3
B2
B2
CP
CP
B2
B4
1)
B1
B7
1)2)
B2
B4
B11)
B3
B3
1)
CP
CP
B2
B2
A2
Assembly with door
to the rear is possible
(see diagram to the right).
2) Additional holes will need to
be drilled during assembly.
B11)
A1
A8
A9
B8
B9
156
Rittal Handbook 30/Industrial Enclosure Systems
B7 1)2)
Wide variety of combination possibilities
B4
A6
B3
A5
B2
Example
of door
to the rear
A4
A3
More information, see pages 158/159.
Dimensional drawings, see pages 160 – 163.
A2
Depth = 20″/500 mm
Width (inches/mm)
Height (inches/mm)
32/800
48/1200
63/1600
Part No.
Part No.
Part No.
Depth = 16″/400 mm
Width (inches/mm)
32/800
48/1200
63/1600
Part No.
Part No.
Part No.
1648.600
1652.600
2612.600
2642.600
2652.600
2611.200
2641.200
2651.200
2615.200
2645.200
2655.200
2600.600
2620.600
2630.600
2902.200
2922.000
2962.200
2901.200
2921.200
2961.200
AK enclosure
48/1200
B7
Top section
2647.600
2648.600
2649.600
25/630
deep rear door
A6
Top section
2662.600
2663.600
2664.600
17/430
deep rear door
A5
Top section
2614.600
2644.600
2654.600
17/430
A4
B4
Center section
2613.200
2643.200
2653.200
7.8/200
A3
B3
Cover plate
A2
2616.200
2646.200
2656.200
1.1/28
B2
Bottom section
2610.600
2640.600
2650.600
27/670
A1
B1
Base/plinth
2842.200
2852.200
2864.200
7.8/200
B9
A9
A8
2841.200
2851.200
2863.200
4/100
B8
157
Rittal Handbook 30/Industrial Enclosure Systems
AP Console
Systems
AP CONSOLE SYSTEMS
Possible combinations
735
660
697
828
1300
200
417.5
500
600
AP 2694.600 and
AP 2696.200
(Console)
AP 2694.600 and
AP 2696.200
(Console)
AP 2694.600 and
MC 4757.000
(Drawer)
860
1300
417.5
Technical details see page 168.
500
600
AP 2695.600
Configuration
Material
Finish
Enclosure body
Sheet steel 16 ga/1.5 mm
Doors* top, bottom, rear
Sheet steel 14 ga/2.0 mm
E-coated RAL 7044
exterior powder painted RAL 7032 textured
Mounting panel
Sheet steel 11 ga/3.0 mm
galvanized
Cable entry plate, 3-part
Sheet steel 16 ga/1.5 mm
galvanized
AP 2695.600, 2 trim strips
Aluminum extrusion
RAL 5018
Protection ratings NEMA 12/IP 55 to EN 60 529/10.91/UL 76083/CSA LR 59132.
* For bottom door (AP 2695.600) the drawer or console (see page 169) will have to be installed to maintain the protection rating.
H x W x D 51 x 24 x 20″ / 1300 x 600 x 500 mm
Part No.
Weight (lbs/kg)
Bottom door, short
AP 2694.600
169.8/77.0
Bottom door, tall
AP 2695.600
167.1/75.8
Page
Accessories
Base/plinth
H = 4″/100 mm
SO 2807.200
884
H = 8″/200 mm
SO 2808.200
884
Base/plinth, mobile
SO 2980.200
889
Cable collecting rails
PS 4191.000
898
180° hinges
PS 4189.000
949
Cable entry plates
PS 4320.700
Top door has studs for the installation of vertical mounting bars SZ 2310.038 and horizontally mounted door bars SZ 2325.000 (see page 950).
The inside installation of the AP universal console is like that of the ES 5000 series, i.e. many accessories (PS Part No.) will fit.
Locking system
Standard double-bit insert may be exchanged for 1.06/27 mm lock inserts, Version A, (see page 942) and for Ergoform-S handle,(see page 939).
Order version RAL 7035 textured with suffix .500. Lead times upon request.
892
166
Rittal Handbook 30/Industrial Enclosure Systems
aus
AP UNIVERSAL CONSOLES
Technical details
Universal console AP 2694.600
Mounting panel
600
417.5
42.5
440
365
i. L. 515
48
23
73
499
23
24.5
592
23
17
42
28
173.5
604
635
11°
1196
i. L. 1212
1300
1273.5
i. L. 512
i. L. 512
25.5
44.3
X
502
Universal console AP 2695.600
600
417.5
42.5
592
440
365
i. L. 515
X=
from 8″/200 mm to 16″/400 mm
adjustable along the 1″/25 mm
system hole pattern
11°
835
763
805
i. L. 1212
1300
1273.5
i. L. 512
i. L. 512
44.3
X
25.5
i.L. = available space
502
Keyboard drawer MC 4757.000
477
36
113
70
170
195
600
467
358
508
AP console 2696.200
592
i. L. 432
20
i. L. 27
i. L. 532
58
122
78.5°
i. L. 271.5
36.5
195
4.5
360
168
Rittal Handbook 30/Industrial Enclosure Systems
Download