PRODASafe PCI unit
Installation manual
For DML-1200
B560316K
R59770313/00
10/02/2009
Barco nv Media & Entertainment Division
Noordlaan 5, B-8520 Kuurne
Phone: +32 56.36.89.70
Fax: +32 56.36.883.86
E-mail: sales.events@barco.com
Visit us at the web: www.barco.com
Printed in Belgium
1. General
1. GENERAL
WARNING: All procedures in this chapter may only be performed by “qualified service technicians” .
Definition of “qualified service technicians” or ”qualified technicians”: Persons having appropriate technical
training and experience necessary to be aware of hazards to which they are exposed in performing a task and
of measures to minimize the danger to themselves or other persons.
WARNING: Before starting any service actions, unplug the power cord from the wall outlet !
1.1
Content of the kit
Kit overview
Order number
Description
Quantity
B560316K
PRODASafe PCI unit
1
R59770313 PRODASAFE PCI UNIT 10/02/2009
1
1. General
2
R59770313 PRODASAFE PCI UNIT 10/02/2009
2. Preparations
2. PREPARATIONS
2.1
Remove side cover of base
The procedure is the same for the left as for the right side cover.
Necessary tools
Flat screwdriver
How to remove
1. Loosen the 4 captive screws (1).
1
Image 2-1
Remove side panel
2. Take out the side panel.
2.2
Accessing the electronics via the top cover
What should be done to get access
The top cover which is split in two parts covers a protection plate, also split into two parts. So, after removing the top cover, remove
also the protection plate.
Necessary tools
Flat screw driver 4.5 mm
How to access
1. Turn the captive screws a quarter counter clockwise.
R59770313 PRODASAFE PCI UNIT 10/02/2009
3
2. Preparations
Image 2-2
Top cover, remove
2. Take off the cover.
3. Repeat both steps for the second half of the cover
4. To remove the protection cover, start with the cover near the input side and loosen the 7 captive screws (1 to 7).
2
3
7
1
5
4
6
13
10
9
8
12
11
Image 2-3
5. Take off the plate.
6. Repeat for the other part of the protection cover. Loosen the 6 captive screws (8 to 13) and take off the cover.
Access to the electronics is possible.
4
R59770313 PRODASAFE PCI UNIT 10/02/2009
3. Installation
3. INSTALLATION
3.1
Remove the PRODASafe card
How to remove
1. Loosen both fixation screws of the card holder (1 and 2).
3
2
1
Image 3-1
PRODASafe card
2. Move the card holder upwards (3)
3. Pull out the current PRODASafe card.
3.2
Mount a PRODASafe card
How to mount
1. Move the card holder upwards (1).
2. Insert the new PRODASafe card.
1
2
3
Image 3-2
PRODASafe, mount
3. Push the card holder on the inserted card (1) and tighten both screws (2 and 3).
3.3
Finalizing the installation
Steps to be take
1. Place both parts of the protection cover on the base. Start with the part opposite to the external connections.
R59770313 PRODASAFE PCI UNIT 10/02/2009
5
3. Installation
12
6
2
1
13
10
11
8
5
4
3
7
9
Image 3-3
Protection cover, mount
Both pieces are unique and cannot be switched.
2. Mount the top cover.
3. Reinstall the side covers.
6
R59770313 PRODASAFE PCI UNIT 10/02/2009