LS3080
Inground
Static White / Color
FEATURES
The LS3080 ingrade takes performance and control technology to a new level, whist
leveraging the industry leading reliability of the Lumascape inground platform. Advances in
performance include; optional PowerSyncTM control technology for highly granular, individual
control; EasyGlowTM visual comfort technology dramatically reduces the perception of glare;
CoolDriveTM active thermal management engages as internal temperatures increase to keep
light output consistent, and only under extreme conditions will the luminaire take control and
dim the output gradually and smoothly. These technological advancements ensure the best
in class performance of the LS3080 continues throughout its working life.
OVERVIEW / SPECIFICATIONS
Performance
30 W Light Engine
CCT, CRI
Lumen Output (10°)
Efficacy
Peak Intensity
2 700 K, 80 CRI
2 896 lm
81.9 lm/W
56 633 cd
3 000 K, 80 CRI
3 003 lm
82.4 lm/W
58 288 cd
4 000 K, 80 CRI
3 338 lm
92.4 lm/W
69 598 cd
5 000 K, 70 CRI
3 545 lm
98.7 lm/W
71 832 cd
3 500 K, 80 CRI
Red / Green / Blue
Electrical
Control
Construction
Mounting & Adjustability
Ratings & Approvals
cooldrive
+
p wersync
h+electropolish
tm
tmtm
tm
Available Beam Angles
6°, 10°, 15°, 30°, 45°, 9° x 40°, 20° x 60°
Shielding and Glare Control
1/2” Cross hatch louvre
Custom diffusion media
TM-21 Lumen Maintenance (L70)
> 60,000 hrs
Power Consumption
35 W
Input Voltage
110-240V, 50/60Hz (International Market)
120-277V, 50/60Hz (North American Market)
Dimming Options via PowerSyncTM
0-10V (sink or source)
DMX / RDM
Resolution
2000 Hz flicker free dimming to 0.1%
IP Rating
IP68
IK Rating
IK10
Construction Details
316 marine grade stainless steel housing, high strength glass with 8140 lb (3700 kg) static load
rating (when used in conjunction with LS640-K), teflon coated cover screws.
Finish
316 Marine Grade Stainless Steel cover (polished or brushed finish). Other finish options by
request.
Dimensions
Ø10.33” (262 mm) x 19.45” (494 mm) for Pre-Installation Blockout
Ø9.43” (239 mm) x 13.95” (354 mm) for Direct Burial
Installation Options
Pre Installation Blockout, for concrete pour, drive over and general use applications
Direct Burial, for landscapes, planters and special applications (consult factory)
Ambient Operating Temperaturestures
-40°F to 122°F (-40°C to 50°C)
Surface Temperature
≤113° F (45° C)
Adjustability
±20° tilt, 360° rotation
Mounting Accessories
LS640-K (for use with Pre-Installation Blockout luminaires)
Weight
15 lb (6.8 kg)
Approved Use
Dry, Damp, Wet locations
Inherently Protected
Suitable for use in poured concrete
Certifications (Pending)
ETL, CE, RCM, CCC
cooldrive
p wersync
easyglow
tm
tm
tm
cooldrive
easyglow
tm
PAGE 1 / 7
Products and specifications are subject to change without notice
tm
easyglow
PENDING
tm
LUMASCAPE.COM
LS3080USA 160919
LS3080 Pre-Install
Inground
Static White / Color
Why Use LS640-K-97 Pre-Installation Blockout?
Why Use LS640-K-84 Pre-Installation Blockout?
The LS640-K-97 acts as the ‘rough in section’ or ‘pre-installation blockout’,
and can be ordered ahead to suit site construction schedule. LS640-K-97
is supplied complete with a blockout cover, junction box (4-way, ¾”
PVC) and IP68 connector assembly, allowing the installer to complete all
hardwiring before the luminaire arrives on site, and ensures the luminaire
is not damaged during site works. The IP68 connector enables tool-free
connection of the luminaire. The junction box remains accessible after
installation.
The LS640-K-84 is an alternate installation type for configurations
not supported by the IP68 connector, or for wiring conditions
not compatible with the junction box. LS640-K-84 requires the
luminaire to be fitted with either ‘type 82’ or ‘type 84’ connection
type. These options are 100% hardwired, and require the
placement of a junction box (by others) within reach of the factorysealed wire entry. All aspects of the luminaire itself are still field
serviceable.
Note: The ‘97’ version is for dimming options, and the ‘87’ version is for
non-dimming options.
Note: This option does not support dimming.
Connection Type '97' for LS640-K-97 Pre-Installation Blockout
Lens Options
94
6.
m
m
(1
76
Ø
)
”
OptiClear™ Glass
Glass of very high optical
purity and load strength.
Suitable for walk-over and
drive-over applications.
19.45” (494 mm)
Ø10.33” (262 mm)
GripGlass™
OptiClear™ glass with slip
reduction glazing process.
Suitable for walk-over and
drive-over applications.
IP68 Connector & Junction Box
The luminaire is fitted with an IP68 connector, which attaches directly to the cord supplied
with LS640-K-97, without the use of any tools. The cord is 1.8’ (0.56 m) in length, and is factory
assembled with a 4 way, ¾” junction box - Remains field serviceable after installation.
Connection Type '84' for LS640-K-84
Pre-Installation Blockout
Flush Cover Options
Flush covers for pre-installation use special seals and support
bushes to ensure static loads up to 8 140 lb (3 700 kg) are
properly supported. In order to achieve this drive-over rating,
OptiClear™ or GripGlass™ must be used.
Pre-Installation Blockout
Round Flush Cover
n SS316: Polished
n SS316: Brushed
6.5’ SOOW Cord
For connection to the branch circuit via junction box (by others) or
other approved method. C/W 6.5’ SOOW Cord (16/3).
For other length options, consult factory.
PAGE 2 / 7
Products and specifications are subject to change without notice
LUMASCAPE.COM
LS3080USA 160919
LS3080 Pre-Install
LS3080
Inground
Static White / Color
30W
Colour / Temp
24
Beam Angle
Code
Q
09
Code
2700 K, 80 CRI
827
6º
VN(1)
3000 K, 80 CRI
830
10
NR
3500 K, 80 CRI
835
15º
NM
4000 K, 80 CRI
840
30º
ME
5000 K, 70 CRI
750
45º
WD
Red
RED
9º x 40º
NH
Green
GRN
40º x 9º
NV
Blue
BLU
20º x 60º
WH
60º x 20º
WV
(1) Not available with colored LEDs.
Lens
Code
OptiClearTM
A(1)
TM
G(1)
GripGlass
Housing Depth
19.45” (494 mm)
Code
24
(1) Suitable for drive-over
Wire Entry Location
Cover
Code
Stainless steel, polished
M
Stainless steel, brushed
N
Connection Type
Code
Bottom
Code
Q
Input Voltage
Code
120-277V, 50/60Hz
09
IP68 Connector & junction box
97(1)
IP68 Connector & junction box
87(2)
Control
Flexible cable
84(3)
Non-Dim
ND
0-10 V or DMX/RDM
PS (1)
(1) Required for dimming applications. LS640-K-97-01 required - order separately
(2) Non-dimming applications only. LS640-K-87-01 required - order separately
(1) Requires LS6540 Data Injector
- order Seperately
(3) Non-dimming applications only. LS640-K-84 required - order separately
PAGE 3 / 7
Products and specifications are subject to change without notice
Code
LUMASCAPE.COM
LS3080USA 160919
LS3080 Direct Burial
Inground
Static White / Color
Why Use Direct Burial?
Direct burial installation is ideal for landscaping areas or for special applications where depth is restricted. The 316 grade Stainless Steel construction
of the luminaire performs flawlessly in alkaline and acidic soil types, and is also rated for use in concrete pour applications. Note: This installation
type has no option for a pre-installation blockout.
Lumascape ships the luminaire complete with 6.5’ of factory installed hookup wire and ½” NPT adapter with MicroAntiLeachTM wire entry seal.
This provides the installer with greater flexibility to determine the nature of the branch circuit connection. This connection is also 100% hardwired.
Internal luminiare components remain field serviceable.
Consult factory for application advice prior to using this configuration.
Note: PowerSyncTM Dimming and control options are not supported for direct burial installations – refer Pre Installation Blockout configurations only.
Connection type '82' for 'Direct Burial' housing
Lens Options
OptiClear™ Glass
Glass of very high optical
purity and load strength.
Suitable for walk-over and
drive-over applications.
GripGlass™
OptiClear™ glass with slip
reduction glazing process.
Suitable for walk-over and
drive-over applications.
½” NPT Adapter
The luminaire is factory-fitted with 6.5’ hookup wire. Ensure terminations can be
made within this length. For other length options, consult factory.
Recessed Cover Options
Flush Cover Options
Use recessed cover for installation in soil, grass, pavers and
other uneven surfaces where no cover overhang is desired.
Use flush covers for installation in fine finished surfaces such as
granite and marble. They can also be used in some suspended
applications. The flush cover will conceal gaps between the
luminaire and the surrounding surface.
Recessed Cover
n SS316: Polished
n SS316: Brushed
Round Flush Cover
n SS316: Polished
n SS316: Brushed
Ø9.43” (239 mm)
Housing OD
0.98”
(25 mm)
Ø6.94” (176 mm)
Ø6.94” (176 mm)
PAGE 4 / 7
Products and specifications are subject to change without notice
13.95” (354 mm)
13.95” (354 mm)
0.98”
(25 mm)
Ø9.43” (239 mm)
Housing OD
0.12” (3 mm)
(1
Ø
(1 6.9
76 4
m ”
m
)
Ø
6
76 .94
m ”
m
)
Ø10.08” (256 mm)
Cover OD
LUMASCAPE.COM
LS3080USA 160919
LS3080 Direct Burial
LS3080
Inground
Static White / Color
30W
Colour / Temp
25
Beam Angle
Code
09
ND
Code
2700 K, 80 CRI
827
6º
VN(1)
3000 K, 80 CRI
830
10
NR
3500 K, 80 CRI
835
15º
NM
4000 K, 80 CRI
840
30º
ME
5000 K, 70 CRI
750
45º
WD
Red
RED
9º x 40º
NH
Green
GRN
40º x 9º
NV
Blue
BLU
20º x 60º
WH
60º x 20º
WV
(1) Not available with colored LEDs.
Lens
Code
OptiClearTM
A(1)
TM
G(1)
GripGlass
Housing Depth
13.95” (354 mm)
Code
25
(1) Suitable for drive-over
Cover
Wire Entry Location
Code
Code
B
Side
N
Recessed type, stainless steel, brushed
H
Bottom
Q
Round flush type, stainless steel, polished
D
Round flush type, stainless steel, brushed
I
Recessed type, stainless steel, polished
Connection Type
½“ NPT Adapter
Input Voltage
Code
120-277V, 50/60Hz
09
Code
82
PAGE 5 / 7
Products and specifications are subject to change without notice
Control
Code
Non-Dim
ND
LUMASCAPE.COM
LS3080USA 160919
s
s
LS3080 Wiring Diagrams
tm
Inground
Static White / Color
pure V, ptics
opticlear
Diagram 14 - DMX/RDM
- Line Voltage Circuit (110-277
50/60 Hz)
microantileach
electropolish+
p wersync
ptics
pure
Diagram 15 - 0-10 Vmicroantileach
Dimming - Line Voltage Circuit
(110-277
V, 50/60 Hz)electropolish+
opticlear
p wersync
tm
tm
tm
tm
tm
coo
LS6540
PowerSyncTM
Data Injector
110-277 V
50/60 Hz
110-277 V 50/60 Hz +Data
DMX In
DMX Out
Observe typical DMX
wiring guidelines
tm
tm
tm
tm
tm
tm
LS6540
PowerSyncTM
Data Injector
110-277 V
50/60 Hz
110-277 V 50/60 Hz +Data
0-10 V In
Dimming syncronization
link to next Data Injector
NOTE: The above diagrams are intended to show electrical pathways between luminaires and ancillary devices. These diagrams are not intended to show type or
color of cord/wire, luminaire input voltage rating, wire gauge or approved use of the cord/wire supplied with luminaires.
PAGE 6 / 7
Products and specifications are subject to change without notice
LUMASCAPE.COM
LS3080USA 160919
coo
LS3080
Inground
Static White / Color
MAX CIRCUIT LOAD
Fixture Quantity per PowerSyncTM Data Injector
Voltage
12A
16A
120V
30
45
240V
45
45
277V
45
45
Refer to PowerSyncTM installation manual for maximum distance information and typology options
PAGE 7 / 7
Products and specifications are subject to change without notice
LUMASCAPE.COM
LS3080USA 160919