1300 Industrial Road, Unit #19
San Carlos, CA 94070
FREE CALL 1-866-695-5862 US & Canada
info@lumascape.com
LS452 Centria
At Grade
IP66
IP67
The LS452 semi recessed Centria is ideal for signage illumination, wall washing and
general landscape lighting applications where a low profile appearance is desired.
LS452 provides an alternative to traditional ingrade uplighting allowing efficient
focusing of the light whilst minimizing spill. The IP68 stainless steel gear enclosure
below grade ensures long life. Choices of lamps, beam angles, light and glare control
accessories are available.
Specifications
Lamp Source
20 W, 39 W, 70 W MH T4 (G8.5)
Approved Use
Suitable for wet locations
Suitable for use in poured concrete
IP Rating
IP66 / IP67
Construction
LM20 diecast marine grade powder coated
aluminum and 316 marine grade stainless steel
Installation Type
Pre-Installation Blockout
Concrete pour, drive-over & general use
applications
LS452 Centria
Direct Burial
Landscapes, planters & special applications
(consult factory)
365°
Standard Inclusion
MicroAntiLeach™ wire entry
Ambient Operating
Temperature
20 W, 39 W -4 °F to 122 °F (-20 °C to +50 °C)
Accessories
LS6065 Linear spreader lens
LS6066 Prismatic lens
LS6067 Concentric louver
LS6064 - R / G / B / Y Dichroic filters
Order separately
70 W
-4 °F to 104 °F (-20 °C to +40 °C)
5° past vertical
Surface Temperature
≤149 °F (≤65 °C)
HumanTouch™ compliant models
20 W MH T4
w horizo
Refer to www.lumascape.com
10° be
lo
Photometrics
ntal
LS6014 External glare shield
Any luminaire can become hot - take care with appropriate use and placement
*Warning: Under no
circumstances should
fixture be installed
deeper than shown
LS637-K Centria
with LS637-K Pre-installation blockout
www.lumascape.com
Aug 2013
LS452 Pre-Installation Blockout
At Grade
Why Use LS637-K Pre-Installation Blockout?
Why Use LS637-K-SP Pre-Installation Blockout?
The LS637-K pre-installation kit (order separately) is a key aspect of
Lumascape's approach to engineering high performance product. The
LS637-K acts as a blockout, and is intended for installation before
the luminaire however it has other special functions. To simplify the
installation, every LS637-K is supplied complete with a 4-way, ¾"
PVC junction box, inside which the installer can make all necessary
connections, and allows the completion of all wiring even before the
luminaire arrives on site. This method also ensures the luminaire itself
is not damaged during concreting or other site works. To complete the
installation, Lumascape provides an IP68 connector, enabling a tool-free
final connection from the luminaire to the branch circuit. In addition,
this connector is readily detachable, allowing for off-site maintenance.
The LS637-K-SP pre-installation kit (order separately) is ideal for use
in applications where maximum flexibility for the type and location of
branch circuit connections are required or where exact site conditions
may be unknown. For use with the LS637-K-SP, Lumascape provides
the LS452 complete with 6.5' of factory-installed hookup wire and a ½”
NPT adapter (complete with a MicroAntiLeach™ seal). This provides
the installer with greater flexibility to determine the type and location of
the branch circuit connection. This option is also 100% hard-wired, and
does not feature the IP68 detachable couplings for off-site maintenance.
All aspects of the luminaire itself are still field serviceable.
Connection Type '85' for LS637-K Pre-Installation Blockout
IP68 Connector & Junction Box
Ø7.0” (179 mm)
Housing OD
Ø4
The luminaire is fitted with an IP68
connector, which attaches directly
to the cable supplied with LS637-K,
without the use of any tools. The
cable is 1.8' (0.56 m) in length, and
is factory assembled with a 4-way
junction box.
11.5” (292 mm)
m)
Connection Type '82' for LS637-K-SP
Pre-Installation Blockout
0m
(11
8.3” (211 mm)
.3”
Note: Top of flange
should always be
above finished level
Note: Top of flange
should always be
above finished grade
Cover Options for
Pre-Installation Blockout
Pre-Installation Blockout
Round Flush Cover
 SS316: Polished
 SS316: Brushed
Note: Top of flange
should always be
above finished level
½" NPT Adapter
The luminaire is factory-fitted with 6.5'
hookup wire. Ensure terminations can be
made within this length.
For other length options, consult factory.
www.lumascape.com
Aug 2013
LS452 Pre-Installation Blockout
Lamp
Cover
At Grade
Connection
Type
Optical
System
Housing
Depth
Wire
Entry
Location
Input
Voltage
23
Q
09
LS452
LAMP
OPTICAL SYSTEM
Description
Wattage Base
Code
Reflector
Beam
MH T4
20 W
211
212 (1)
213 (1)
Aluminum
Narrow
12˚
Medium
30˚
G8.5
39 W
70 W
(1)
Finish
(1)
Electronic ballast
Code
Flood
54˚
Wide flood
74˚
XV
XW
XX
XY
HOUSING DEPTH
COVER
Description
Material
Finish
Round Flush
Cover
Stainless
steel
Polished
Brushed
Description
Code
Code
23
11.5" (292 mm)
M
N
WIRE ENTRY LOCATION
Location
CONNECTION TYPE
Description
IP68 Connector & Junction Box
½" NPT Adaptor
(1)
(2)
LS637-K required - order separately
LS637-K-SP required - order separately
Code
85 (1)
82 (2)
Code
Q
Bottom
INPUT VOLTAGE
Description
Code
09
120-277 V, 50/60 Hz
FINISH
Description
Material
Code
Black, powder coated
Aluminum
White, powder coated
Aluminum
Silver, powder coated
Aluminum
CB
CW
CS
Accessories
Stacking and order of accessories
LS6104
External Glare Shield
LS6067
Concentric louver
OR
LS6065
Linear spreader lens
LS6066
Prismatic lens
LS6064 - R / G / B / Y
Dichroic color filter
T4
Other accessory stacking options may be available - consult factory
www.lumascape.com
Aug 2013
LS452 Direct Burial
At Grade
Why Use Direct Burial?
Direct burial installation is ideal for landscaping areas or for special applications where depth is restricted. This type of installation also allows for
maximum heat dissipation. The 316 grade Stainless Steel construction of the luminaire performs flawlessly in alkaline and acidic soil types, and is
also rated for use in concrete pour applications. Note: This installation type has no option for a pre-installation blockout.
Lumascape provides the LS452 complete with 6.5' of factory installed hookup wire and ½" NPT adapter, supplied complete with MicroAntiLeach™
seal. This provides the installer with greater flexibility to determine the nature of the branch circuit connection. This connection is also 100%
hardwired. All aspects of the luminaire itself remains field servicable.
Consult factory for application advice prior to using this configuration.
Connection type '82' for 'Direct Burial'
housing
Note: Top of flange
should always be
above finished level
½" NPT Adapter
The luminaire is factory-fitted with 6.5'
hookup wire. Ensure terminations can be
made within this length.
For other length options, consult factory.
Cover Options for Direct Burial
Use recessed cover for installation in soil, grass, pavers and
other uneven surfaces where no cover overhang is desired.
Use flush covers for installation in fine finished surfaces such as
granite and marble. They can also be used in some suspended
applications. The flush cover will conceal gaps between the
luminaire and the surrounding surface.
Recessed Cover
Round Flush Coverr
 SS316: Polished
 SS316: Brushed
 SS316: Polished
 SS316: Brushed
Ø6” (152 mm)
Housing OD
Ø6.8” (172 mm)
Cover OD
Note: Top of flange
should always be
above finished grade
0.1” (3 mm)
Ø6” (152 mm)
Housing OD
0.98”
(25 mm)
5.2” (133 mm)
5.2” (133 mm)
8.3” (211 mm)
8.4” (212 mm)
Ø4.3” (108 mm)
www.lumascape.com
)
mm
10
” (1
4.3
)
mm
10
” (1
4.3
0.98”
(25 mm)
Note: Top of flange
should always be
above finished grade
Ø4.3” (108 mm)
Aug 2013
LS452 Direct Burial
Lamp
At Grade
Cover
Connection
Type
Optical
System
Housing
Depth
LS452
28
LAMP
Input
Voltage
Finish
09
OPTICAL SYSTEM
Description
Wattage Base
Code
Reflector
Beam
MH T4
20 W
211
212 (1)
213 (1)
Aluminum
Narrow
12˚
Medium
30˚
G8.5
39 W
70 W
(1)
Wire
Entry
Location
(1)
Electronic ballast.
Code
Flood
54˚
Wide flood
74˚
XV
XW
XX
XY
HOUSING DEPTH
COVER
Description
Material
Finish
Recessed Flush
Cover
Stainless
steel
Polished
Round Flush
Cover
Stainless
steel
Polished
Brushed
Brushed
Description
Code
Code
28
5.2" (133 mm)
B
H
D
I
WIRE ENTRY LOCATION
Location
Code
N
Q
Side
Bottom
CONNECTION TYPE
Description
½" NPT Adaptor
Code
82
INPUT VOLTAGE
Description
Code
09
120-277 V, 50/60 Hz
FINISH
Description
Material
Code
Black, powder coated
Aluminum
White, powder coated
Aluminum
Silver, powder coated
Aluminum
CB
CW
CS
Accessories
Stacking and order of accessories
LS6104
External Glare Shield
LS6067
Concentric louver
OR
LS6065
Linear spreader lens
LS6066
Prismatic lens
LS6064 - R / G / B / Y
Dichroic color filter
T4
Other accessory stacking options may be available - consult factory
www.lumascape.com
Aug 2013