1300 Industrial Road, Unit #19
San Carlos, CA 94070
FREE CALL 1-866-695-5862 US & Canada
info@lumascape.com
Ingrade
LS363LED
IP68
OPTIONAL
PTIONAL
TIONAL
PTIONAL
IK10
OPTIONAL
The LS363LED is a robust, medium wattage ingrade luminaire, featuring high efficacy
Lumileds™ LEDs. As an inherently protected luminaire it can be used in interior spaces
and immediately adjacent to combustible materials (such as wood decking, etc). In
addition, internal rotation and tilt adjustability ensures the most efficient light delivery
can be set according to the site conditions.
Specifications
Lamp Source
16 LED
□ White (4 300 K typical)
■ Warm white (3 000 K typical)
■ Warm white (2 700 K typical)
■ Blue (470 nm)
Other colors by request
Approved Use
Suitable for wet locations
Suitable for use in poured concrete
Inherently protected
Lumen Maintenance
(L70)
Limited by TM-21 x6 rule
IP Rating
IP68
Construction
316 marine grade stainless steel
Installation Types
Pre-Installation Blockout
Concrete pour, drive-over & general use
applications
LS363LED
with round flush cover and GripGlass™
>60,000 hrs
360°
15° 15°
Direct Burial
Landscapes, planters & special applications
(consult factory)
Drive-over
With OptiClear™ lens and pre-installation
blockout LS644-K
Static Load Rating
6 600 lb (3 000 kg) with OptiClear™ lens and preinstallation blockout LS644-K
(Load applied to center of glass across a 2" diameter area)
Impact Rating
IK10 with OptiClear™ lens
Standard Inclusions
Teflon coated cover screws
MicroAntiLeach™ wire entry
Accessories
LS644-K pre-installation blockout
LS645 brass grill
(For use with direct burial, recessed cover type only)
Ambient Operating
Temperature
-22 °F to 122 °F (-30 °C to +50 °C)
Surface Temperature
≤113 °F (45 °C)
Photometrics
Refer to www.lumascape.com
Any luminaire can become hot - take care with appropriate use and placement
www.lumascape.com
29 Aug 2016
LS363LED Pre-installation
Ingrade
Why Use LS644-K-87-09 Pre-Installation Blockout?
Why Use LS644-K-84 Pre-Installation Blockout?
The LS644-K-87-09 acts as a blockout, and is intended for installation
before the luminaire, however it has other special functions. To simplify
the installation, every LS644-K-87-09 is supplied complete with a
4-way, ¾" PVC junction box, inside which the installer can make all
necessary connections, and allows the completion of all wiring even
before the luminaire arrives on site. This method also ensures the
luminaire itself is not damaged during concreting or other site works.
Note: The junction box remains serviceable after installation.
To complete the installation, Lumascape provides an IP68 connector,
enabling a tool-free final connection from the luminaire to the branch
circuit. In addition, this connector is readily detachable, allowing for
off-site maintenance.
The LS644-K-84 pre-installation kit (order separately) is ideal for use
in applications where maximum flexibility for the type and location of
branch circuit connections are required or where exact site conditions
may be unknown. For use with the LS644-K-84, Lumascape provides
the LS363LED complete with 6.5' of factory-installed hookup wire or
an SOOW cord (both options include a MicroAntiLeach™ seal). This
provides the installer with greater flexibility to determine the type and
location of the branch circuit connection. This option is also 100% hardwired, and does not feature the IP68 detachable couplings for off-site
maintenance. All aspects of the luminaire itself are still field serviceable.
Lens Options
(1 Ø5.
36 4”
m
m
)
Connection Type '87' for LS644-K-87-09 Pre-Installation Blockout
14.6” (372 mm)
Ø8.3” (210 mm)
OptiClear™ Glass
Glass of very high optical purity and
load strength. Suitable for walk-over and
drive-over applications.
IP68 Connector & Junction Box
The luminaire is fitted with an IP68 connector, which attaches directly to the cord supplied
with LS644-K-87-09, without the use of any tools. The cord is 1.8' (0.56 m) in length, and
is factory assembled with a 4 way, ¾" junction box - Remains field serviceable after
installation.
GripGlass™
OptiClear™ glass with slip reduction
glazing process. Suitable for walk-over
and drive-over applications.
Connection Type '84' for LS644-K-84
Pre-Installation Blockout
Cover Options for
Pre-Installation Blockout
Connection Type '82' for LS644-K-84
Pre-Installation Blockout
Flush covers for pre-installation use special
seals and support bushes to ensure static
loads up to 6 600 lb (3 000 kg) are properly
supported. In order to achieve this driveover rating, OptiClear™ or GripGlass™
must be used.
6.5' SOOW Cord
½" NPT Adapter
For connection to the branch circuit
via junction box (by others) or other
approved method.
The luminaire is factory-fitted with 6.5'
hookup wire. Ensure terminations can be
made within this length.
Pre-Installation Blockout
Round Flush Cover
c/w 6.5' SOOW Cord (16/3)
For other length options, consult factory.
■ SS316: Polished
www.lumascape.com
■ SS316: Brushed
29 Aug 2016
LS363LED Pre-installation
Product
Lamp
Lens
Ingrade
Cover
Connection
Type
Optical
System
LS363LED
LAMP
Housing
Depth
Wire
Entry
Location
23
Q
Input
Voltage
OPTICAL SYSTEM
Description
Wattage Color
LED
16 W
Code
Description Beam
Code
1 W4
Adjustable
1 H6
Adjustable
Warm white
1 D7
Adjustable
Blue
NR
ME
WD
LH (1)
LV (1)
1 B4
White
(4 300 K typ.)
Warm white
(3 000 K typ.)
(2 700 K typ.)
(470 nm)
Adjustable
0
Adjustable
Refer to beam orientation diagram below.
HOUSING DEPTH
LENS
Description
OptiClear™
Description
Code
Very high optical purity
and load strength
GripGlass™ OptiClear™ with
slip reduction glazing
process
(1)
Wide
Code
23
14.6" (372 mm)
A (1)
WIRE ENTRY LOCATION
G (1)
Description
Suitable for drive-over.
Code
Q
Bottom
COVER
Description
Material
Finish
Round Flush
Cover
Stainless
steel
Polished
Brushed
INPUT VOLTAGE
Code
Description
M
N
Code
120-277 V, 50/60 Hz
120V, 50/60 Hz Forward Phase Dimmable Driver
09
25
CONNECTION TYPE
Description
Code
IP68 Connector & Junction Box
87 (1)
6.5' SOOW Cord
84 (2)
½" NPT Adapter
82 (2)
(1)
(2)
LS644-K-87-09 required - order separately.
LS644-K-84 required - order separately.
LS363LED Accessories
Stacking and order of accessories
LS667
Solite Lens
LED
Beam Orientations
Beam Orientation
for the "LV" optical
system
www.lumascape.com
Beam Orientation
for the "LH" optical
system
29 Aug 2016
LS363LED Direct Burial
Ingrade
Why Use Direct Burial?
Direct burial installation is ideal for landscaping areas or for special applications where depth is restricted. This type of installation also allows for
maximum heat dissipation. The 316 grade Stainless Steel construction of the luminaire performs flawlessly in alkaline and acidic soil types, and is
also rated for use in concrete pour applications. Note: This installation type has no option for a pre-installation blockout.
Lumascape provides the LS363LED complete with 6.5' of factory installed hookup wire and ½" NPT adapter, supplied complete with MicroAntiLeach™
seal. This provides the installer with greater flexibility to determine the nature of the branch circuit connection. This connection is also 100%
hardwired. All aspects of the luminaire itself remains field serviceable.
Consult factory for application advice prior to using this configuration.
Connection type '82' for 'Direct Burial'
housing
Lens Options
OptiClear™ Glass
Glass of very high optical purity and load
strength. Suitable for walk-over and driveover applications.
½" NPT Adapter
The luminaire is factory-fitted with 6.5'
hookup wire. Ensure terminations can be
made within this length.
For other length options, consult factory.
GripGlass™
OptiClear™ glass with slip reduction
glazing process. Suitable for walk-over and
drive-over applications.
Cover Options for Direct Burial
Use recessed cover for installation in soil,
grass, pavers and other uneven surfaces
where no cover overhang is desired.
Use flush covers for installation in fine finished surfaces such as granite and marble.
They can also be used in some suspended applications. The flush cover will conceal gaps
between the luminaire and the surrounding surface.
Recessed Cover
Round Flush Cover
Square Flush Cover
■ SS316: Polished
■ SS316: Brushed
■ SS316: Polished
■ SS316: Brushed
■ SS316: Brushed
www.lumascape.com
Ø 5.6” (142 mm)
0.1” (3 mm)
0.1” (3 mm)
Ø7.4” (187 mm)
Housing OD
8.7” (221 mm)
8.7” (221 mm)
8.7” (221 mm)
Ø5.6” (142 mm)
0.98”
(25 mm)
Ø
(1 5.
36 4”
m
m
)
Ø
36 5.4”
m
m
)
(1
(1 Ø 5
36 .4”
m
m
)
Ø7.4” (187 mm)
Housing OD
Ø7.4” (187 mm)
Housing OD
0.98”
(25 mm)
Ø8.0” (204 mm)
Ø8.0” (204 mm)
Cover OD
0.98”
(25 mm)
Ø 5.6” (142 mm)
29 Aug 2016
LS363LED Direct Burial
Product
Lamp
Lens
Ingrade
Cover
Connection
Type
LS363LED
Optical
System
82
LAMP
Housing
Depth
Wire
Entry
Location
Input
Voltage
21
OPTICAL SYSTEM
Description
Wattage Color
LED
16 W
Code
Description Beam
Code
16W4
Adjustable
16H6
Adjustable
Warm white
16D7
Adjustable
Blue
NR
ME
WD
LH (1)
LV (1)
16B4
White
(4 300 K typ.)
Warm white
(3 000 K typ.)
(2 700 K typ.)
(470 nm)
Adjustable
0
Adjustable
(1) Refer
LENS
Description
Wide
HOUSING DEPTH
Code
OptiClear™
Very high optical purity
and load strength
A
GripGlass™
OptiClear™ with
slip reduction glazing
process
G
to beam orientation diagram below.
Description
Code
21
8.7" (221 mm)
WIRE ENTRY LOCATION
Description
Code
N
Q
Side
COVER
Bottom
Description Material
Finish
Recessed
Cover
Stainless
steel
Polished
Round Flush Stainless
Cover
steel
Polished
Square Flush Stainless
Cover
steel
Brushed
Brushed
Brushed
Code
B
H
INPUT VOLTAGE
D
I
120-277 V, 50/60 Hz
Description
Code
120V, 50/60 Hz Forward Phase Dimmable Driver
09
25
V
LS363LED Accessories
CONNECTION TYPE
Description
Stacking and order of accessories
Code
82
½" NPT Adapter
LS645
Brass grill
External accessory
Use with recessed covers only
Not suitable for use in traffic areas
LS667
Solite Lens
LED
Beam Orientations
Beam Orientation
for the "LV" optical
system
www.lumascape.com
Beam Orientation
for the "LH" optical
system
29 Aug 2016