Application
Adjustable T6 metal halide downlight for directional accent lighting where high light levels
and good color rendition are required. Also used in sloped ceiling applications.
Architectural Series
PRODUCT DATA
REFLECTOR: The reflector eliminates high angle glare and redirects spill light into
the space. The reflector and lamp assembly are mounted to the rotation ring which
allows for 359° horizontal and 45° vertical adjustment. The dual locking mechanism
insures that the fixture stays aimed after relamping. Torsion springs maintain a tight fit
to ceiling to eliminate light leaks and facilitate installation. A one-half inch low profile
overlap flange is standard. Reflectors are available in specular or matte finish in a variety
of standard and custom color finishes. Consult the lamp manufacturers for the most
current data pertaining to the lamp.
SERIES 6AMHT6
6" Aperture
Adjustable Recessed Downlight T6 Metal Halide
HOUSING: A fabricated 18 gauge black powder coated steel housing provides a
secure mounting platform for the electrical components and protects the optical assembly. The standard plaster flange allows one inch ceiling thickness with custom depths
available. The ballast is securely bracket mounted to the outside of the housing, and is
serviced through the aperture. Removable top for top relamping.
MOUNTING: Universal mounting brackets adjust vertically 5.5” and accept a variety
of hanger bars, C-channel, EMT or rigid bars (see optional accessories).
ELECTRONIC BALLAST: Solid state electronic ballast is thermally protected
and mounted to junction box. Inline quick connectors facilitate installation and maintenance.
ELECTRICAL: Universal voltage, 120/277 volt input.
JUNCTION BOX: Heavy gauge galvanized junction box pre-wired to ballast quick
connector. Easy access covers. Multiple conduit knockouts listed for through branch
circuit wiring.
SOCKET: 4 KV rated G12 Bi Pin socket.
Lamp
Watts Base Life Hrs. Lumens
CMH70/T6
70
G12
12,000
6,600
CMH35/T6
39
G12
12,000
3,300
10.08"
18.69"
11.12"
Inside lamp, initial lumens
ERTEK
INT
19.99"
CM
C
US
6" Dia.
7.13" Dia.
Rough Opening 6.75"
LIS TED
Listed
Manufactured and tested to UL#1598 and CSA standards.
Note: Suitable for damp location. Fixtures are not designed
For Wet Location
Under Covered Ceiling for direct contact with insulation.
Catalog Number – 6AMHT6______________________________ / ACC63__________________________________________________________________
Example: ACC63SCLPF
Example: 6AMHT6ND70E4
Fixture Series Lamp/Wattage
6AMHT6 ND
Narrow
Distribution
70
6AMHT6 MD
35
Medium
Distribution
Options
Ballast / Voltage
Input Voltage
E4 120/277 Volt Electronic
F=Fuse and
Fuse Holder
Trim
ACC63
Trim Finish w/polished flange
SCLPF – Soft Specular Clear Alzak
For white painted flange, drop “PF” from Catalog #.
For other finishes, consult reflector section.
Optional Accessories
Hanger Bars (set of 2)
#101782 = #520 Caddy Bars
#9152 = 52" C-Channel
#9127 = 27" C-Channel
#27BH = 27" Solid Bar
#24CBH = 24" one-piece B-Line C-Channel hanger bar
Fixture Type
Job Reference/Location
Lamp Type
Approval
All Pathway® products meet or exceed requirements as established by the
National Electrical Code. Specifications subject to change without notice.
Alzak® is a registered trademark of Alcoa.
Pathway Lighting Products, Inc., P.O. Box 591, Old Saybrook, CT 06475-0591
voice 800.342.0592 • fax 800.207.0090 • www.pathwaylighting.com • e-mail: sales@pathwaylighting.com
Series 6AMHT6 - 6" Aperture Adjustable Recessed Downlight T6 Metal Halide
LAMP DATA: T6 ceramic metal halide.
HD2.8
UMBUCA