TECHNICAL DATA SHEET Revolution Series - Size 4 File: SD0902, Rev. 6, 09-03-13 CSA Approved for Damp Locations Available up to 400W Pulse Start Metal Halide, Electronic & Magnetic, 400W Metal Halide, 4x42W Compact Fluorescent, 315W MW Elite SPECIFICATIONS: TM Die cast aluminum ballast housing. Standard finish is Duraplex II Electrostatic Powder coat. Optional colours available. Energy efficient, evoSmart electronic Pulse Start MH ballast, featuring thermal protection, safety shut down features, end of life protection, superior hot lamp restrike. Magnetic HID ballast, class H insulation, copper windings, high power factor, centered in housing for level orientation. High power factor, electronic Compact Fluorescent ballasts available in 1, 2, 3 or 4 lamp configurations. HID Lampholder to be porcelain, Open rated Mogul base for ED28 & ED37 lamps. Compact Fluorescent lamps to be GX24q. Lampholder for 210W and 315W Elite to be PGZ18 base for T9 lamp. Clear Acrylic Reflector Model: Injection molded clear Acrylic prismatic reflector, designed to provide maximum efficiency and brightness control, with high uplight component for reduced contrast and improved uniformity. White Acrylic Reflector Model: Injection molded microcellular foamed acrylic reflector. Uplight component is reduced while downlight levels are increased providing more downward light. Aluminum Reflector Model: formed aluminum, brightened for performance with protective anodized coating. Dual Reflector system (22AD/WD/SD) comes with standard reflector (as above) & segmented Miro hammertone internal reflector for improved performance (210/315W Elite only). Enclosed model comes with choice of: (a) laminated frosted glass lens & decorative cast aluminum blades, glass secured to blades with captive decorative thumb screws; (b) Clear Flat Acrylic lens secured to reflector by stainless steel retainer; (c) Prismatic Conical Acrylic lens secured to reflector by stainless steel retainer; (d) Silicone Prismatic lens secured to reflector using stretch fit design; (e) Internal tempered Glass Lens secured by steel retainer (210/315 Elite only) Mounting choices include ¾” NPS pendant stem, die cast aluminum hook with 3’ cord, aircraft cable with coiled or straight cord. Comes with 3 year limited warranty. OPEN MODEL ENCLOSED ‘EG’ MODEL Ø14.50" [368mm] 3/4" NPS THD 19.15" [486mm] MIN 20.32" [516mm] MAX Ø22.16" [563mm] Ø25.63" [651mm] ORDERING GUIDE: Example: RV4EC442HF22ASC6LFS-1B RV 4 Series Size RV : Revolution 4 Model 1 O : Open EG : Enclosed Glass lens EC : Enclosed Clear Acrylic Flat lens EP : Enclosed Prismatic Acrylic Conical lens ES : Enclosed Silicone Prismatic lens IG : Internal Glass lens (Dual Refl. Only) Lamp 2 Wattage (X)26: 26W (X)32: 32W (X)42: 42W 070: 70W 100: 100W 150: 150W 175: 175W 250: 250W 320: 320W 350: 350W 400: 400W 210: 210W 315: 315W Ballast Type Light Source Blank : HID Magnetic & HF Electronic E : Electronic Standard 3 ED : Electronic Dimming 3,4 EQ : Electronic Intelligent Dimming 3,4 HF : Compact Fluorescent INC : Incandescent MA : Metal Halide PS : Pulse Start MH CME : Ceramic Metal Halide Elite Reflector Mounting Options Voltage 22A : 22” Clear Acrylic 22W: 22” White Acrylic 22S : 22” SemiSpecular Alum 22AD : 22” Clear Acrylic Dual 22WD: 22” White Acrylic Dual 22SD : 22” SemiSpecular Alum Dual Blank : Pendant (by others) 3C : 3’ Factory pre-wired 16/3ST Cabtire w/ 715 Hook 3CP : 3’ factory pre-wired 16/3ST Cabtire w/715 Hook & 20A Twist-lock plug 5 C4 : 4' Coil Cord w/ Aircraft cable C10 : 10' Coil Cord w/ Aircraft cable SC6 : 6' Straight Cord w/ Aircraft Cable SC12 : 12' Straight Cord w/ Aircraft Cable 12P : 12" Steel Pendant 6 6 24P : 24" Steel Pendant 36P : 36" Steel Pendant 6 XXP : Other Sizes Available 6 L : Lamp Included AM : Auxiliary Quartz 9 socket & relay (lamp not included) EM : Auxiliary Quartz socket only FS : In-Line Fusing (120,277,347V only) L30 : Lamp Included 3000K Elite L42 : Lamp Included 4200K Elite 1 : 120V 2 : 208V 3 : 240V 4 : 277V 5 : 480V 6 : 347V T : Tri-Tap 7 Finish 8 Specify colour: B : Keene Black W : Keene White OS : Keene Outside Silver ST : Keene Satin Aluminum (120/277/347V) BL : Lightolier Black WL : Lightolier White AL : Lightolier Aluminum 1 Enclosed models EG: Laminated Frosted Glass with Decorative Cast Aluminum Blades, EC & EP: Acrylic Lens with Stainless Steel Lens Retainer, ES: Silicone prismatic lens, IG: Internal glass lens with Steel Lens Retainer (only for use with 210/315W Elite lamp option & Dual Reflector). Note EC and EP are not available with 22S alum refl. & Dual refl. System; ES not available with 22S alum refl. 2 HF(26,32,42W -(X) denotes # of lamps (Up to 4)); MA(70,100,150,175,250,400W); PS(175,250,320,350,400W); EPS(70,100,150,175,250,320,350,400W); ECME(210,315W); INC(400W Max.) 3 4 Only available with Pulse Start MH systems and CME ED Dimming only with 250W,320W,350W,400W PS & 315W CME, EQ dimming only with 320 PS. 5 6 Specify voltage when requesting this option. Steel Pendant painted same colour as fixture. 7 8 Electronic PS not available with 480 & Tri-tap; CFL ballasts 120, 277, 347V only; leave voltage blank for INC. For other housing finishes, consult factory for available colours and codes 9 AM quartz not available with EPS, EDPS, EQPS, ECME or CFL PROJECT: ______________________________________________________________________________________ TYPE: _____________________ CATALOGUE NUMBER: ___________________________________________ KEENE is a Product Group of Canlyte, 455 Dobbie Drive, P.O. Box 874, Cambridge, ON. N1R 5W4 tel: 519-623-8820 fax: 519-623-4435 QF4010 rev. 3 02-09-18