FI_5SV.book Seite 1 Dienstag, 15. Oktober 2013 1:31 13 s
© Siemens AG 2013
Safe protection against residual currents
Residual current protective devices are used for personnel, material and fire protection, as well as for protection against direct contact. This protects human lives and prevents electrical fires.
The new model for more comfort
The improved design of the residual current protective devices with a separate switch position indicator and a handle imprint provides greater safety and ease-of-use.
They are also suitable for the quick and easy mounting of additional components such as auxiliary switches, fault signal contacts, shunt trips and undervoltage releases.
Easy and safe installation
The new 5SV residual current operated circuit breakers can be released quickly and easily from the bus-mounted assembly with the help of the latching slide – no other tool is needed.
Highlights
7
More convenience and safety through an improved design
7
Uniform and comprehensive additional components as well as a wide range of accessories
7
Consistent busbar concept throughout the residual current protective devices range
7
Replacement of a device from the busbar-mounted assembly requires no tools

FI_5SV.book Seite 2 Dienstag, 15. Oktober 2013 1:31 13
© Siemens AG 2013
Residual Current Protective Devices
■
Overview
Residual current protective devices are used in all supply systems up to 240/415 V AC. Devices of type AC trip in the event of sinusoidal AC residual currents, type A also trips in the event of pulsating DC residual currents.
RCCBs with a rated residual current of maximum 30 mA are used for personnel, material and fire protection, as well as for protection against direct contact. RCCBs with a rated residual current of 10 mA are primarily used in areas that represent an increased risk for personnel.
Since the introduction of DIN VDE 0100-410, all socket outlet current circuits up to 20 A must also be fitted with residual current protective devices with a rated residual current of max.
30 mA. This also applies to outdoor electrical circuits up to 32 A for the connection of portable equipment.
■
Benefits
• Instantaneous type A devices have a surge current withstand capability with current waveform 8/20
 s of more than 1 kA.
• Auxiliary switches, fault signal contacts, undervoltage releases or shunt trips are also available as additional components.
• By means of internal contacts, effective touch protection is provided when grasping and manually operating the latching slide.
• To facilitate entry of pin busbars with connection cables up to
35 mm², the devices are equipped with rectangular terminals for the accommodation of funnel-shaped cable entries.
• By means of standardized clearances of the terminals in modular width dimensions, the RCCBs and MCBs can be optionally connected to busbars on the top or on the bottom.
Devices with a rated residual current of maximum 300 mA are used as preventive fire protection in case of insulation faults.
RCCBs with a rated residual current of 100 mA are primarily used outside Europe.
■
Technical specifications
Standards
Surge current withstand capability
• Type A with current waveform 8/20 µs Acc. to EN 60060-2
(VDE 0432-2)
• Type F with current waveform 8/20 µs Acc. to EN 60060-2
(VDE 0432-2)
Minimum operational voltage for test function operation
Test cycles:
Insulation coordination
• Overvoltage category kA kA
V AC
Pollution degree
5SV terminal conductor cross-sections
• 1 conductor
- Solid (

10 mm
2
) / stranded (

16 mm
2
)
- Finely stranded with non-insulated end sleeve
- Finely stranded with insulated end sleeve
- Finely stranded without end sleeve
• 2-wire, same cross-section, same conductor type
- Solid (

10 mm
2
) / stranded (

16 mm
2
)
- Finely stranded with non-insulated end sleeve
- Finely stranded with insulated end sleeve
- Finely stranded without end sleeve
• 1-wire + busbar (pin thickness 1.5 mm)
- Solid (

10 mm
2
) / stranded (

16 mm
2
)
- Finely stranded with non-insulated end sleeve
- Finely stranded with insulated end sleeve
Terminal tightening torque mm mm mm mm mm mm mm mm mm mm mm
2
2
2
2
2
2
2
2
2
2
2
• Up to I n
80 A
• At I n
= 100 A, 125 A
Mains connection
Mounting position (on a standard mounting rail)
Degree of protection Acc. to EN 60529
(VDE 0470-1)
Touch protection
Service life
Nm
Nm
Acc. to EN 50274
(VDE 0660-514)
Average number of switching cycles
Test cycle acc. to IEC/EN 61008
Storage temperature
Ambient temperature
°C
°C
Resistance to climate
CFC and silicone-free
Acc. to IEC 60068-2-30
Instantaneous SIGRES Super resistant Selective
IEC/EN 61008-1 (VDE 0664-10); IEC/EN 61008-2-1 (VDE 0664-11);
IEC/EN 61543 (VDE 0664-30); IEC/EN 62423 (VDE 0664-40)
> 1
--
100
III
2
1.5 ... 50
1.5 ... 25
1.5 ... 25
2.5 ... 50
0.75 ... 10
0.75 ... 4
0.75 ... 4
1 ... 4
10 ... 25
6 ... 25
6 ... 16
2.5 ... 3.0
3.0 ... 3.5
Top or bottom
Any
> 10000
-40 ... +75
-25 ... +45, marked with -25
--
Bottom
Finger and back-of-hand safe
> 3
> 3
Top or bottom
IP20, if the distribution board is installed, with connected conductors
28 cycles (55 °C; 95 % rel. air humidity)
Yes
> 5
--
Siemens · 2013

FI_5SV.book Seite 3 Dienstag, 15. Oktober 2013 1:31 13
© Siemens AG 2013
Residual Current Protective Devices
■
Selection and ordering data
(Type A)
-25
Rated residual current
I
 n
Rated current Max. permissible short-circuit back-up fuse
I n
10 000
Mounting width
DT Article No.
mA
RCCBs, type A, instantaneous
A
1P+N; 125 ... 230 V AC; 50 Hz
N connection, right
10
30
16
16
25
40
100
63
80
25
40
63
80
A
63
63
100
63
100
MW
2
2
2
5SV3111-6
5SV3311-6
5SV3312-6
5SV3314-6
5SV3316-6
5SV3317-6
5SV3412-6
5SV3414-6
5SV3416-6
5SV3417-6
2 5SV3612-6
5SV3614-6
5SV3616-6
5SV3617-6
300
3P+N; 230 ... 400 V AC; 50 Hz
N connection, right
30
25
40
63
80
100
25
40
63
80
25
40
63
80
300
500 25
40
63
80
25
40
63
80
63
100
100
100
100
100
4
4
4
4
5SV3342-6
5SV3344-6
5SV3346-6
5SV3347-6
5SV3442-6
5SV3444-6
5SV3446-6
5SV3447-6
5SV3642-6
5SV3644-6
5SV3646-6
5SV3647-6
5SV3742-6
5SV3744-6
5SV3746-6
5SV3747-6
Price per PU
PU
(UNIT,
SET,
M)
PS*/
P. unit
PG Weight per PU approx.
kg
1 1 unit
1 1 unit
1 1 unit
1 1 unit
1 1 unit
1 1 unit
1 1 unit
1 1 unit
1 1 unit
1 1 unit
1 1 unit
1 1 unit
1 1 unit
1 1 unit
011
011
011
011
011
011
011
011
011
011
011
011
011
011
0.200
0.204
0.204
0.204
0.200
0.200
0.197
0.197
0.200
0.200
0.196
0.194
0.200
0.200
1 1 unit
1 1 unit
1 1 unit
1 1 unit
1 1 unit
1 1 unit
1 1 unit
1 1 unit
1 1 unit
1 1 unit
1 1 unit
1 1 unit
1 1 unit
1 1 unit
1 1 unit
1 1 unit
011
011
011
011
011
011
011
011
011
011
011
011
011
011
011
011
0.350
0.350
0.358
0.358
0.350
0.350
0.356
0.356
0.350
0.350
0.398
0.399
0.350
0.350
0.350
0.350
* You can order this quantity or a multiple thereof.
Siemens · 2013

FI_5SV.book Seite 4 Dienstag, 15. Oktober 2013 1:31 13
© Siemens AG 2013
Residual Current Protective Devices
■
Selection and ordering data
(Type AC)
-25
I
Rated residual current
 n
Rated current Max. permissible short-circuit back-up fuse
I n
10 000
Mounting width
DT Article No.
A MW mA
RCCBs, type AC, instantaneous
A
1P+N; 125 ... 230 V AC; 50 Hz
N connection, right
10
30
16
16
25
40
63
80
100
300 25
40
63
80
25
40
63
80
3P+N; 230 ... 400 V AC; 50 Hz
N connection, right
30
100 25
40
63
80
25
40
63
80
300
500 25
40
63
80
25
40
63
80
63
63
100
63
100
63
100
100
100
100
100
2
2
2
2
4
4
4
4
5SV4111-0
5SV4311-0
5SV4312-0
5SV4314-0
5SV4316-0
5SV4317-0
5SV4412-0
5SV4414-0
5SV4416-0
5SV4417-0
5SV4612-0
5SV4614-0
5SV4616-0
5SV4617-0
5SV4342-0
5SV4344-0
5SV4346-0
5SV4347-0
5SV4442-0
5SV4444-0
5SV4446-0
5SV4447-0
5SV4642-0
5SV4644-0
5SV4646-0
5SV4647-0
5SV4742-0
5SV4744-0
5SV4746-0
5SV4747-0
Price per PU
PU
(UNIT,
SET,
M)
PS*/
P. unit
PG Weight per PU approx.
kg
1 1 unit
1 1 unit
1 1 unit
1 1 unit
1 1 unit
1 1 unit
1
1 unit
1 1 unit
1 1 unit
1 1 unit
1 1 unit
1 1 unit
1 1 unit
1 1 unit
012
012
012
012
012
012
012
012
012
012
012
012
012
012
0.200
0.202
0.202
0.203
0.200
0.200
0.197
0.197
0.200
0.200
0.196
0.194
0.200
0.200
1 1 unit
1 1 unit
1 1 unit
1 1 unit
1 1 unit
1 1 unit
1 1 unit
1 1 unit
1 1 unit
1 1 unit
1 1 unit
1 1 unit
1 1 unit
1 1 unit
1 1 unit
1 1 unit
012
012
012
012
012
012
012
012
012
012
012
012
012
012
012
012
0.350
0.350
0.358
0.358
0.350
0.350
0.356
0.356
0.350
0.350
0.397
0.399
0.350
0.350
0.350
0.350
Siemens · 2013
* You can order this quantity or a multiple thereof.

FI_5SV.book Seite 5 Dienstag, 15. Oktober 2013 1:31 13
■
Dimensional drawings
35,8
71
20
64
43,9
© Siemens AG 2013
Residual Current Protective Devices
71,8
20
64
43,9
71
6,2
RCCBs, type A and type AC
1P+N, 2 MW
■
Circuit diagrams
Graphic symbols
1 N
1P+N
2 N
1 3 5 N
2 4 6 N
3P+N
N connection, right
RCCBs, type A and type AC
3P+N, 4 MW
6,2
Siemens · 2013

FI_5SV.book Seite 6 Dienstag, 15. Oktober 2013 1:31 13
Appendix
■
Overview
Article No.
Page Export markings
ECCN
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5SV3
5SV3344-6
5SV3346-6
5SV3347-6
5SV3442-6
5SV3444-6
5SV3446-6
5SV3447-6
5SV3642-6
5SV3644-6
5SV3646-6
5SV3647-6
5SV3742-6
5SV3744-6
5SV3746-6
5SV3111-6
5SV3311-6
5SV3312-6
5SV3314-6
5SV3316-6
5SV3317-6
5SV3412-6
5SV3414-6
5SV3416-6
5SV3417-6
5SV3612-6
5SV3614-6
5SV3616-6
5SV3617-6
5SV3342-6
5SV3747-6
5SV4
5SV4111-0
5SV4311-0
5SV4312-0
5SV4314-0
5SV4316-0
5SV4317-0
5SV4412-0
5SV4414-0
5SV4416-0
5SV4417-0
5SV4612-0
5SV4614-0
5SV4616-0
5SV4617-0
5SV4342-0
5SV4344-0
5SV4346-0
5SV4347-0
5SV4442-0
5SV4444-0
5SV4446-0
5SV4447-0
5SV4642-0
5SV4644-0
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
N
N
N
N
N
N
N
N
N
N
N
EAR99H
EAR99H
EAR99H
EAR99H
N
N
EAR99H
N
N
N
EAR99H
EAR99H
EAR99H
EAR99H
N
N
EAR99H
EAR99H
N
N
N
N
N
N
N
N
N
N
N
EAR99H
N
N
N
EAR99H
EAR99H
N
N
EAR99H
EAR99H
EAR99H
EAR99H
N
N
Siemens · 2013
AL
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
© Siemens AG 2013
Article No.
5SV4646-0
5SV4647-0
5SV4742-0
5SV4744-0
5SV4746-0
5SV4747-0
Page
4
4
4
4
4
4
Export markings
ECCN
N
N
EAR99H
EAR99H
EAR99H
EAR99H
A product's export markings are updated daily at www.siemens.com/industrymall .
N
N
N
N
AL
N
N

FI_5SV.book Seite 7 Dienstag, 15. Oktober 2013 1:31 13
© Siemens AG 2013
Appendix
■
Overview
By using this catalog you can acquire hardware and software products described therein from Siemens AG subject to the following terms. Please note! The scope, the quality and the conditions for supplies and services, including software products, by any Siemens entity having a registered office outside of Germany, shall be subject exclusively to the General Terms and Conditions of the respective Siemens entity. The following terms apply exclusively for orders placed with Siemens AG.
For customers with a seat or registered office in Germany
The “General Terms of Payment” as well as the “General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry” shall apply.
For software products, the “General License Conditions for Software Products for Automation and Drives for Customers with a
Seat or registered Office in Germany” shall apply.
For customers with a seat or registered office outside of
Germany
The “General Terms of Payment” as well as the “General Conditions for Supplies of Siemens, Automation and Drives for Customers with a Seat or registered Office outside of Germany” shall apply.
For software products, the “General License Conditions for Software Products for Automation and Drives for Customers with a
Seat or registered Office outside of Germany” shall apply.
General
The dimensions are in mm. In Germany, according to the German law on units in measuring technology, data in inches only apply to devices for export.
Illustrations are not binding.
Insofar as there are no remarks on the corresponding pages,
- especially with regard to data, dimensions and weights given - these are subject to change without prior notice.
The prices are in
€
(Euro) ex works, exclusive packaging.
The sales tax (value added tax) is not included in the prices.
It shall be debited separately at the respective rate according to the applicable legal regulations.
Prices are subject to change without prior notice. We will debit the prices valid at the time of delivery.
Surcharges will be added to the prices of products that contain silver, copper, aluminum, lead and/or gold if the respective basic official prices for these metals are exceeded. These surcharges will be determined based on the official price and the metal factor of the respective product.
The surcharge will be calculated on the basis of the official price on the day prior to receipt of the order or prior to the release order.
The metal factor determines the official price as of which the metal surcharges are charged and the calculation method used.
The metal factor, provided it is relevant, is included with the price information of the respective products.
You will find
• an exact explanation of the metal factor
• the text of the Comprehensive Terms and Conditions of Sale and Delivery of Siemens AG in the Internet under www.siemens.com/automation/salesmaterial-as/catalog/en
/terms_of_trade_en.pdf
Export regulations
Siemens shall not be obligated to fulfill this agreement if such fulfillment is prevented by any impediments arising out of national or international foreign trade or customs requirements or any embargoes or other sanctions.
If Purchaser transfers goods (hardware and/ or software and/ or technology as well as corresponding documentation, regardless of the mode of provision) delivered by Siemens or works and services (including all kinds of technical support) performed by
Siemens to a third party worldwide, Purchaser shall comply with all applicable national and international (re-) export control regulations. In any event Purchaser shall comply with the (re-) export control regulations of the Federal Republic of Germany, of the
European Union and of the United States of America.
If required to conduct export control checks, Purchaser, upon request by Siemens, shall promptly provide Siemens with all information pertaining to particular end customer, destination and intended use of goods, works and services provided by Siemens, as well as any export control restrictions existing.
Purchaser shall indemnify and hold harmless Siemens from and against any claim, proceeding, action, fine, loss, cost and damages arising out of or relating to any noncompliance with export control regulations by Purchaser, and Purchaser shall compensate Siemens for all losses and expenses resulting thereof, unless such noncompliance was not caused by fault of the
Purchaser. This provision does not imply a change in burden of proof.
The products listed in this catalog / price list may be subject to
European / German and/or US export regulations.
Therefore, any export requiring a license is subject to approval by the competent authorities.
According to current provisions, the following export regulations must be observed with respect to the products featured in this catalog / price list:
AL
ECCN
Number of the German Export List
Products marked other than “N” require an export license.
In the case of software products, the export designations of the relevant data medium must also be generally adhered to.
Goods labeled with an “AL“ not equal to “N” are subject to European or German export authorization when being exported out of the EU.
Export Control Classification Number
Products marked other than “N” are subject to a reexport license to specific countries.
In the case of software products, the export designations of the relevant data medium must also be generally adhered to.
Goods labeled with “ECCN“ not equal to “N” are subject to US re-export authorization.
Even without a label, or with label "AL:N" or "ECCN:N", authorization may be required due to the final end-use and destination for which the goods are to be used.
In addition, you can preview the export designations via our "Industry Mall" online catalog system in the respective product description. The deciding factors are the AL or ECCN export authorization indicated on order confirmations, delivery notes and invoices.
Errors excepted and subject to change without prior notice.
Siemens · 2013

© Siemens AG 2013
Siemens AG
Infrastructure & Cities Sector
Low and Medium Voltage Division
Low Voltage & Products
Postfach 10 09 53
93009 REGENSBURG
GERMANY
Subject to change without prior notice
PDF only: (E86060-P8280-E020-A1-7600)
MP.R3.LP.0000.00.3.09
PI 1013 En / valid until 09/14
Produced in Germany
© Siemens AG 2013
The information provided in this catalog contains descriptions or characteristics of performance which in case of actual use do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressly agreed in the terms of contract. Availability and technical specifications are subject to change without notice.
All product designations may be trademarks or product names of
Siemens AG or supplier companies whose use by third parties for their own purposes could violate the rights of the owners.
www.siemens.com/sentron