MOS FET Relays
G3VM-41GR8
Low 100-mΩ ON Resistance.
High-power, 1-A Switching with SOP Package.
• Continuous load current of 1 A.
• ON resistance of 0.1 Ω (typical) suppresses output signal
attenuation.
• Dielectric strength of 1,500 Vrms between I/O.
• RoHS compliant
■ Application Examples
Note: The actual product is marked differently from the image shown
here.
• Broadband systems
• Measurement devices and Data loggers
• Amusement machines
■ List of Models
Contact form
SPST-NO
Terminals
Surface-mounting
terminals
Load voltage (peak value)
40 VAC
Model
G3VM-41GR8
Number per stick
100
G3VM-41GR8(TR) ---
Number per tape
--2,500
■ Dimensions
Note: All units are in millimeters unless otherwise indicated.
G3VM-41GR8
4.4±0.25
3.9±0.2
2.1 max.
0.15
Note: The actual product is marked differently
from the image shown here.
0.4±0.1
0.6±0.3
0.1±0.1
7.0±0.4
Weight: 0.1 g
2.54±0.25
■ Terminal Arrangement/Internal Connections (Top View)
G3VM-41GR8
4
3
1
2
■ Actual Mounting Pad Dimensions (Recommended Value, Top View)
G3VM-41GR8
6 to 6.3
1.2
0.8
2.54
MOS FET Relays
G3VM-41GR8
117
■ Absolute Maximum Ratings (Ta = 25°C)
Item
Input
Symbol
Rating
Unit
Measurement Conditions
LED forward current
IF
30
mA
LED forward current
reduction rate
Δ IF/°C
−0.3
mA/°C
LED reverse voltage
VR
5
V
Note:
Tj
125
°C
VOFF
40
V
Continuous load current
IO
1,000
mA
ON current reduction rate
Δ IO/°C
−13.3
mA/°C
Connection temperature
Tj
Connection temperature
Output Load voltage (AC peak/DC)
Ta ≥ 25°C
1. The dielectric strength between the input and
output was checked by applying voltage between all pins as a group on the LED side and
all pins as a group on the light-receiving side.
Ta ≥ 50°C
125
°C
Dielectric strength between input and VI-O
output (See note 1.)
1,500
Vrms
AC for 1 min
Operating temperature
Ta
−40 to +85
°C
With no icing or condensation
Storage temperature
Tstg
−55 to +125 °C
With no icing or condensation
Soldering temperature (10 s)
---
260
°C
10 s
■ Electrical Characteristics (Ta = 25°C)
Item
Input
Minimum
Symbol
Typical
Maximum
Measurement
conditions
Unit
LED forward voltage
VF
1.18
1.33
1.48
V
IF = 10 mA
Reverse current
IR
---
---
10
μA
VR = 5 V
Capacity between terminals
CT
---
70
---
pF
V = 0, f = 1 MHz
Note:
2. Turn-ON and Turn-OFF
Times
IF
IFT
---
1.0
3
mA
IO = 100 mA
RON
---
0.1
0.13
Ω
IF = 5 mA,
IO = 1 A
Current leakage when the relay is open ILEAK
---
0.2
1
nA
VOFF = 30 V
Capacity between terminals
COFF
---
300
500
pF
V = 0, f = 1MHz
Capacity between I/O terminals
CI-O
---
0.8
---
pF
f = 1 MHz, Vs = 0 V
Insulation resistance between I/O terminals
RI-O
1,000
---
---
MΩ
VI-O = 500 VDC,
RoH ≤ 60%
Turn-ON time
tON
---
1.2
3.0
ms
Turn-OFF time
tOFF
---
0.2
0.5
ms
IF = 5 mA, RL = 200 Ω,
VDD = 20 V (See note 2.)
Trigger LED forward current
Output Maximum resistance with output ON
■ Recommended Operating Conditions
Use the G3VM under the following conditions so that the Relay will operate properly.
Item
Symbol
Minimum
Typical
Maximum
Unit
Load voltage (AC peak/DC)
VDD
---
---
32
V
Operating LED forward current
IF
5
10
20
mA
Continuous load current (AC peak/DC) IO
---
---
1,000
mA
Operating temperature
25
---
60
°C
118
Ta
MOS FET Relays
G3VM-41GR8
1
4
2
3
RL
VDD
VOUT
IF
VOUT
10%
t ON
90%
t OFF
■ Engineering Data
LED forward current vs.
Ambient temperature
Continuous load current vs.
Ambient temperature
IO - Ta
40
30
20
10
0
20
40
60
80
100
1
0.8
0.6
0.4
0
-20
120
0
Ambient temperature Ta (ഒ)
20
Ta = 25 ഒ
I F = 5 mA
1
0.5
0
-0.5
60
80
100
0.05
0.1
0.1
0.05
0-20
0.15
0
Turn ON, Turn OFF time tON, tOFF (mS)
0.1
0.05
0.03
LED forward current IF (mA)
40
30
50
1.4
1.5
1.6
60
80
1.5
1
0.5
0
-20
100
0
20
40
60
80
100
Ambient temperature Ta (ഒ)
Current leakage vs.
Ambient temperature
I LEAK - Ta
tON, tOFF - Ta
t OFF
10
20
1.3
IO ==100
100mA
mA
t<1s
Turn ON, Turn OFF time vs.
Ambient temperature
0.5
5
1.2
2
Ambient temperature Ta (ഒ)
t ON
3
1.1
IFT - Ta
0.15
tON, tOFF - IF
1
1
Trigger LED forward current vs.
Ambient temperature
VDD = 20 V, RL = 200 Ω
I F = 5 mA
t ON
1
10
Current leakage ILEAK (nA)
0
Ta = 25 ഒ
VDD = 20 V, RL = 200 Ω
0.01
1
LED forward voltage VF (V)
I O ==1A
1A
I F = 5 mA,
mA, tt << 1s
1s
Turn ON, Turn OFF time vs.
LED forward current
0.3
5
3
120
0.2
On-state voltage VON (V)
Turn ON, Turn OFF time tON, tOFF (mS)
40
-1
1
10
RON - Ta
On-state resistance RON (Ω)
Continuous load current IO (A)
IO - VON
-0.05
30
On-state resistance vs.
Ambient temperature
1.5
-0.1
Ta=25ഒ
50
Ambient temperature Taഒ
Continuous load current vs.
On-state voltage
-1.5
-0.15
100
0.2
Trigger LED forward current I F T (mA)
0
-20
IF - VF
1.2
LED forward current I F (mA)
50
Continuous load current I O (A)
LED forward current IF (mA)
IF - Ta
LED forward current vs.
LED forward voltage
0.5
0.3
t OFF
0.1
0.05
VOFF = 40 V
1
0.1
0.03
0.01
-20
0
20
40
60
80
100
0.01
-20
Ambient temperature Ta (ഒ
MOS FET Relays
0
20
40
60
80
Ambient temperature Ta (ഒ)
G3VM-41GR8
119
100
All sales are subject to Omron Electronic Components LLC standard terms and conditions of sale, which
can be found at http://www.components.omron.com/components/web/webfiles.nsf/sales_terms.html
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON ON-LINE
OMRON ELECTRONIC
COMPONENTS LLC
Global - http://www.omron.com
USA - http://www.components.omron.com
55 E. Commerce Drive, Suite B
Schaumburg, IL 60173
847-882-2288
Cat. No. X302-E-1
MOS FET Relays
12/10
Specifications subject to change without notice
G3VM-41GR8
Printed in USA
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Omron:
G3VM-41GR8 G3VM-41GR8(TR)