PS7211-2A
D
8 PIN SOP 100 V
BREAKDOWN VOLTAGE
2-CH OPTICAL COUPLED MOSFET
DESCRIPTION
• DUAL CHANNEL:
1a + 1a output
The PS7211-2A is a solid state relay containing GaAs LEDs
on the light emitting side (input side) and MOSFETs on the
output side. It is suitable for analog signal control because of
its low offset and high linearity.
UE
FEATURES
• LOW LED OPERATING CURRENT:
IF = 2 mA
• DESIGNED FOR AC/DC SWITCHING LINE CHANGER
• SMALL AND THIN PACKAGE:
8-pin SOP, Height = 2.1 mm
APPLICATIONS
• LOW OFFSET VOLTAGE
• EXCHANGE EQUIPMENT
• AVAILABLE IN TAPE AND REEL
• MEASUREMENT EQUIPMENT
NT
IN
• FA/OA EQUIPMENT
ELECTRICAL CHARACTERISTICS (TA = 25°C)
PART NUMBER
PARAMETERS
UNITS
VF
Forward Voltage, IF = 10 mA
V
IR
Reverse Current, VR= 5 V
µA
SC
O
Coupled
MOSFET Diode
SYMBOLS
PS7211-2A
ILoff
Off-state Leakage Current, VD = 100 V
Cout
Output Capacitance, VD = 0 V, f = 1 MHz
IFon
LED On-state Current, IL = 100 mA
MIN
TYP
MAX
1.2
1.4
5
µA
0.03
pF/ch
57
1.0
mA
RON1
RON2
On-state Resistance,
IF = 10 mA, IL = 10 mA
IF = 10 mA, IL = 100 mA, t ≤ 10 ms
tON
tOFF
RI-0
Turn-on Time1 IF = 10 mA, VO = 5 V, PW ≥ 10 ms
Turn-off Time1
Isolation Resistance, VI-0 = 1.0 KV
CI-0
Isolation Capacitance, V = 0 V, f = 1 MHz
2.0
Ω
3.4
6.0
ms
0.16
0.02
1.0
0.2
Ω
109
pF/ch
0.4
DI
Note:
1. Test Circuit for Switching Time:
PS7211-2A
IF
Pulse Input
VL
Input
7
6
5
1
2
3
4
50%
0
Input Monitor
Rin
8
VO Monitor
VO = 5 V
90%
Output
RL
10%
ton
toff
California Eastern Laboratories
PS7211-2A
ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C)
SYMBOLS
PARAMETERS
UNITS
RECOMMENDED OPERATING
CONDITIONS (TA = 25°C)
RATINGS
PART NUMBER
IFP
MOSFET
VL
IL
ILP
Peak Forward
Current2
Break Down Voltage
Continuous Load Current
Pulse Load Current3
AC/DC Connection
Power Dissipation
Isolation Voltage4
Total Power Dissipation
Operating Temperature
Storage Temperature
50
5
mW/ch
50
A
1
V
mA
100
100
mA
mW/ch
260
180
V
mW
°C
°C
1500
460
-40 to +80
-40 to +100
PART NUMBER
PACKAGE
PS7211-2A
8 PIN SOP
PS7211-2A-F3
PS7211-2A-F4
NT
OUTLINE DIMENSIONS (Units in mm)
0.4±0.3
8
7
6
5
1
2
3
4
2.54
DI
0.5 -0.05
7.0±0.3
4.4
+0.10
0.15 -0.05
2.05 +0.08
-0.05
+0.08
TOP VIEW
SC
O
9.08±0.5
0.40 +0.10
-0.05
mA
V
MIN TYP MAX
2
0
10
20
0.5
0.5 ± 0.3
1.
2.
3.
4.
5.
6.
7.
8.
PACKING STYLE
Magazine case 45 pcs
Embossed tape 1500 pcs/reel
Notes:
1. Operation in excess of any one of these parameters may result
in permanent damage
2. PW = 100 µs, Duty Cycle 1%.
3. PW = 100 ms, 1 shot.
4. AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input
and output.
PS7211-2A
UNITS
ORDERING INFORMATION
IN
PD
Coupled
BV
PT
TOP
TSTG
Power Dissipation
SYMBOLS
PARAMETERS
IF
LED Operating Current
VF
LED Off Voltage
mA
V
D
PD
Forward Current (DC)
Reverse Voltage
UE
Diode
IF
VR
PS7211-2A
LED Anode
LED Cathode
LED Anode
LED Cathode
MOSFET
MOSFET
MOSFET
MOSFET
PS7211-2A
TYPICAL PERFORMANCE CURVES (TA = 25°C unless otherwise specified)
MAXIMUM LOAD CURRENT vs.
AMBIENT TEMPERATURE
MAXIMUM FORWARD CURRENT vs.
AMBIENT TEMPERATURE
40
20
0
-25
0
25
75 80
50
100
50
0
-25
0
25
50
75
80
100
Ambient Temperature, TA (°C)
IN
Ambient Temperature, TA (°C)
OUTPUT CAPACITANCE vs.
APPLIED VOLTAGE
FORWARD VOLTAGE vs.
AMBIENT TEMPERATURE
125
NT
1.6
1.4
IF = 50 mA
30 mA
20 mA
10 mA
1.2
5 mA
1.0
1 mA
SC
O
Forward Voltage, VF (V)
100
UE
Maximum Forward Current, IF (mA)
60
Output Capacitance, Cout (pF)
Maximum Forward Current, IF (mA)
80
D
150
100
0.8
-25
0
25
50
75
f = 1 MHz
100
75
50
25
0
0
100
20
40
60
80
100
125
Ambient Temperature, TA (°C)
Applied Volltage, VD (V)
OFF-STATE LEAKAGE CURRENT vs.
APPLIED VOLTAGE
LOAD CURRENT vs. LOAD VOLTAGE
-3
IF = 10 mA
200
-4
10-5
TA = 80°C
10-6
-7
10
25°C
Load Current, IL (mA)
10
DI
Off-state Leakage Current, ILoff (A)
10
100
-1.0
-0.5
0
0.5
-100
10-8
-200
-9
10
0
20
40
60
80
Applied Volltage, VD (V)
100
120
Load Volltage, VL (V)
1.0
PS7211-2A
TYPICAL PERFORMANCE CURVES (TA = 25°C unless otherwise specified)
30
2.5
25
2.0
1.0
0.5
20
15
UE
1.5
10
5
25
50
100
75
0
3.2
3.3
3.4
3.5
3.6
On-state Resistance, Ron (Ω)
TURN-ON TIME vs. FORWARD CURRENT
2.5
IN
0
Ambient Temperature, TA (°C)
TURN-OFF TIME vs. FORWARD CURRENT
0.5
VO = 5 V
Turn-off Time, toff (ms)
NT
2.0
1.5
1.0
SC
O
0.5
0
0
5
10
15
20
25
0.3
0.2
0.1
0
30
0
TURN-ON TIME DISTRIBUTION
10
5
15
20
25
TURN-OFF TIME DISTRIBUTION
n = 50 pcs
IF = 10 mA
VO = 5 V
25
Number (pcs)
DI
15
10
30
n = 50 pcs
IF = 10 mA
VO = 5 V
20
5
Forward Current, IF (mA)
30
25
VO = 5V
0.4
Forward Current, IF (mA)
Number (pcs)
n = 50 pcs
IF = 0 mA
IL = 10 mA
D
Normalized to 1.0
at TA = 25 °C
IF = 10 mA
IL = 10 mA
0.0
-25
Turn-on Time, ton (ms)
ON-STATE RESISTANCE DISTRIBUTION
3.0
Number (pcs)
Normalized On-state Resistance, Ron (Ω)
NORMALIZED ON-STATE RESISTANCE vs.
AMBIENT TEMPERATURE
20
15
10
5
0
0
0.1
0.2
0.3
0.4
Turn-on Time, ton (ms)
0.5
0.02
0.04
Turn-off Time, toff (ms)
30
PS7211-2A
TYPICAL PERFORMANCE CURVES (TA = 25°C unless otherwise specified)
NORMALIZED TURN-OFF TIME vs.
AMBIENT TEMPERATURE
NORMALIZED TURN-ON TIME vs.
AMBIENT TEMPERATURE
3.0
2.0
1.5
1.0
0.5
0.0
-25
0
25
50
75
100
1.0
0.5
0
25
50
75
100
IN
NT
1.75 ± 0.1
1.5
TAPE DIRECTION
TAPE OUTLINE AND DIMENSIONS
4.0 ± 0.1
2.0
Ambient Temperature, TA (°C)
TAPING SPECIFICATIONS (Units in mm)
2.0 ± 0.1
2.5
0.0
-25
Ambient Temperature, TA (°C)
Normalized to 1.0
at TA = 25 °C
IF = 10 mA
VO = 5 V
D
2.5
UE
Normalized to 1.0
at TA = 25 °C
IF = 10 mA
VO = 5 V
Normalized Turn-off Time, toff (ms)
Normalized Turn-on Time, ton (ms)
3.0
PS7211-2A-F3
PS7211-2A-F4
2.8 ± 0.1
1.55 ± 0.1
7.5 ± 0.1
10.45 ± 0.1
SC
O
16.0 ± 0.3
0.3
1.55 ± 0.1
7.6 ± 0.1
DI
12.0 ± 0.1
REEL OUTLINE and DIMENSIONS
2.5
φ21.0 ± 0.8
2.0 ± 0.5
φ100±5.0
φ330
φ13.0±1.0
+2.0
16.4 -0.0
PS7211-2A
RECOMMENDED SOLDERING CONDITIONS
UE
D
235 °C or below (package surface temperature)
30 seconds or less
Two
Rosin flux containing small amount of chlorine
(The flux with a maximum chlorine content of 0.2 Wt % is recommended.)
(heating)
to 10 s
235 ˚C (peak temperature)
210 ˚C
to 30 s
100 to 160 ˚C
60 to 120 s
(preheating)
IN
Package Surface Temperature T (˚C)
(1) Infrared reflow soldering
• Peak reflow temperature
• Time of temperature higher than 210 °C
• Number of reflows
• Flux
NT
Time (s)
(2) Dip soldering
• Temperature
• Time
• Number of times
• Flux
260 °C or below (molten solder temperature)
10 seconds or less
One
Rosin flux containing small amount of chlorine
(The flux with a maximum chlorine content of 0.2 Wt % is recommended.)
(3) Cautions
• Fluxes
Avoid removing the residual flux with freon-based cleaning solvent.
SC
O
• Avoid shorting between portion of frame and leads.
*
* : Portion of frame
DI
*
Life Support Applications
These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected
to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify
CEL for all damages resulting from such improper use or sale.
EXCLUSIVE NORTH AMERICAN AGENT FOR NEC RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS
CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • (408) 988-3500 • Telex 34-6393 • FAX (408) 988-0279
DATA SUBJECT TO CHANGE WITHOUT NOTICE
Internet: http://WWW.CEL.COM
10/08/2001