YOKE MOUNT CF4-16 SERIES 16" (406 mm) CUTOFF FLOODLIGHT Reflector Prefinished semi-specular diffuse aluminum Housing Seamless, die-cast aluminum DeltaGuard® finish Ballast Capacitor Ignitor (Where required) 16" 6 (40 ) ) mm 3.0" (76 mm) 1.5" (38 mm) C m 5m 6 " (1 6.5 0.688" (17 mm) Dia. Hole 0.219" (6 mm) R. Typical L 2.5" (64 mm) 0.547" (14 mm) 0.742" (19 mm) 1.3" (32 mm) 2.1" (52 mm) 0.438" Wide x 1." Long (11 mm W x 25 mm L) Obround Hole + L.C. Cord 36" (914 mm) long CL 0.688" (17 mm) Dia. Typical Lamp (Included) Lampholder + 3.3" (83 mm) + Ballast Compartment Cover Patented Hinge Assembly Yoke Mount Bracket SPEC # SPEC # SPEC # SPEC # SPEC # SPEC # SPEC # SPEC # SPEC # WATTAGE CATALOG # PULSE START METAL HALIDE 150W PSMH CF4615-(a)(b) 200W PSMH CF4620-(a)(b) 250W PSMH CF4625-(a)(b) 320W PSMH CF4632-(a)(b) 350W PSMH CF4635-(a)(b) 400W PSMH CF4640-(a)(b) HIGH PRESSURE SODIUM 250W HPS CF4525-(a)(b) 400W HPS CF4540-(a)(b) Specify (a) Voltage & (b) Options. Notes Lens Frame Die-cast aluminum door frame secures lens; sealed with silicone gasket (a) VOLTAGE SUFFIX KEY M T 1 2 27 3 4 5 6 (b) OPTIONS (factory-installed) 120/208/240/277V (Standard) 120/277/347V (Canada Only) (Standard) 120V 277V 277V Reactor (PSMH Only) 208V 240V 480V 347V (Canada Only) -(a)F -(a)P -5P Q Fusing Button Photocell External Photocell (for 480V) Quartz Standby (includes 100W quartz lamp) (N/A on 277V Reactor) U Uplight Lens Frame Specify (a) Single Voltage — See Voltage Suffix Key For voltage availability outside the US and Canada, see Bulletin TD-9 or contact your Ruud Lighting authorized International Distributor. GENERAL DESCRIPTION ELECTRICAL FINISH Sharp cutoff luminaire for HID lamp, totally enclosed. Housing is seamless, die-cast aluminum. Yoke mounting is a hinged steel bracket, measuring 5" (127 mm) wide by 2.5" (64 mm) high, which allows vertical tilt of fixture and double locks in 5° increments from 0° to 90° above horizontal. Bracket attaches to housing with two 5/16" stainless-steel bolts. Bracket bolts are supplied with sealing washer to prevent water leakage. A 36" (914 mm) flexible cord is provided for electrical connection. Lens assembly consists of rigid aluminum frame and high-impact, cleartempered glass. Fixture includes clear, mogul-base lamp. Pulse-rated porcelain enclosed, 4kv-rated screw- shell-type lampholder with spring-loaded center contact. Lamp ignitor included. All ballast assemblies are high-power factor and use the following circuit type: Exclusive Colorfast DeltaGuard® finish features an E-coat epoxy primer with medium bronze ultra-durable powder topcoat, providing excellent resistance to corrosion, ultraviolet degradation and abrasion. The finish is covered by our seven-year limited warranty. 277V Reactor 150 – 400W PSMH LABELS HX — High Reactance 150W PSMH CWA — Constant Wattage Autotransformer 200 – 400W PSMH; 250 – 400W HPS PATENTS US 4,689,729; 4,709,312 ANSI lamp wattage label supplied, visible during relamping. UL Listed in US and Canada for wet locations and enclosure classified IP65 per IEC 529 and IEC 598. ACCESSORIES FWG-16 LS-16 Wire Guard Polycarbonate Vandal Shield (not for use with fixtures in uplight position) SBL-16 Backlight Shield © 2012 Ruud Lighting, Inc. – A Cree Company. All rights reserved. The information in this document is subject to change without notice. ® 9201 Washington Avenue • Racine, Wisconsin 53406-3772 • PHONE: (800) 236-7000 • FAX: (800) 236-7500 • WEB: www.ruudlightingdirect.com Rev. 05/02/12 An Advanced Lighting Technologies Company Advanced Lighting Technologies Australia Inc Advanced Lighting Technologies New Zealand Ltd Advanced Lighting Technologies Asia Pte Ltd 110 Lewis Road, Wantirna South, VIC 3152 8 Boeing Place, Mount Maunganui Block 4008, Ang Mo Kio Avenue 10, #04-06, Techplace 1 Australia New Zealand Singapore 61 03 9800 5600 64 07 579 0163 65 6844 2338 www.adlt.com.au www.adlt.co.nz www.adlt.com.sg YOKE MOUNT CF4-16 SERIES 16" (406 mm) CUTOFF FLOODLIGHT Isofootcandle plots show initial footcandles at grade. (Footcandles ÷ 0.0929 = Lux) 180° 150° 100' 80' 60' 40' 20' 160' 120° 42.7 120' 36.6 .5 0° 30° 6.1 7 0' 150° 12.2 5 0m 6.1 20' 60° 12.2 40' 30.5 24.4 18.3 12.2 6.1 0 m 6.1 12.2 18.3 24.4 30.5 Candlepower distribution curve of 400W PSMH Cutoff Floodlight at 20° vertical tilt 180° 18.3 3 20' 26238 24.4 1 60' 40' 19679 30.5 .3 80' 90° 13119 20' 40' 60' 80' 100' 48.8 140' 100' 6560 0' Isofootcandle plot of 400W PSMH Cutoff Floodlight at 25' (7.6 m) mounting height and 20° vertical tilt (Plan view) 100' 80' 60' 40' 20' 160' 120° 0' 20' 40' 60' 80' 100' 48.8 140' 120' .08 .1 100' .3 .5 1 2 3 80' 90° 60' 40' 20' 20000 5 0' 20' 40000 0° 60° Beta Lighting Sciences Inc. Certified Test Report No. LSI 10692 Candlepower distribution curve of 400W HPS Cutoff Floodlight at 20° vertical tilt. 180° 150° 180° 150° Pole-spacing Example Data 120' 30.5 100' .3 .5 30.5 24.4 80' 1 24.4 18.3 60' 12.2 40' Lamp Type 150W PSMH CF4625-M 20000 CF4640-M 250W PSMH CF4525-M 0° CF4540-M Ruud 400W PSMH 40000 250W HPS 30° 400W HPS 42.7 .1 36.6 18.3 3 12.2 6.1 20' 0m 0' 0m 6.1 20' 6.1 6.1 5 12.2 40' 30.5 24.4 18.3 12.2 6.1 0 m 6.1 12.2 18.3 24.4 30.5 Isofootcandle plot of 400W HPS Cutoff Floodlight at 30' (9.1 m) mounting height and 20° vertical tilt. (Plan view) 120° TEST AREA Average Initial Light Levels at Grade 4 Fixtures per pole Test area is centered within a (16) pole layout. Catalog # CF4615-M 20' 40' 60' 80' 100' 48.8 140' Isofootcandle plot of 250W HPS Cutoff Floodlight at 25' (7.6 m) mounting height and 20° vertical tilt. (Plan view) 120° 0' 36.6 12.2 40' 30.5 24.4 18.3 12.2 6.1 0 m 6.1 12.2 18.3 24.4 30.5 30° 100' 80' 60' 40' 20' 160' 42.7 90° Lamp Lumens 12,600 22,000 40,000 60° 28,500 50,000 Mounting Height 15' (4.6 m) 20' (6.1 m) 20' (6.1 m) 25' 20000 (7.6 m) 25' (7.6 m) 30' (9.1 m) 20' (6.1 0° m) 25' (7.6 m) 25' (7.6 m) 100M100Y 30' (9.1 m) 90°Pole-spacing Max. Recommended 75' (22.9 m) 100' (30.5 m) 100' (30.5 m) 125' (38.1 m) 125' (38.1 m) m) 40000150' (45.7 60° 100' (30.5 m) 30° 125' (38.1 m) 125' (38.1 m) 150' (45.7 m) (Footcandles ÷ 0.0929 = Lux) Footcandles 6.36 3.80 6.63 3.80 9.69 7.19 9.45 5.39 9.45 6.89 Lux 65 39 65 37 84 62 102 58 102 74 © 2012 Ruud Lighting, Inc. – A Cree Company. All rights reserved. The information in this document is subject to change without notice. ® 9201 Washington Avenue • Racine, Wisconsin 53406-3772 • PHONE: (800) 236-7000 • FAX: (800) 236-7500 • WEB: www.ruudlightingdirect.com Rev. 05/02/12 An Advanced Lighting Technologies Company Advanced Lighting Technologies Australia Inc Advanced Lighting Technologies New Zealand Ltd Advanced Lighting Technologies Asia Pte Ltd 110 Lewis Road, Wantirna South, VIC 3152 8 Boeing Place, Mount Maunganui Block 4008, Ang Mo Kio Avenue 10, #04-06, Techplace 1 Australia New Zealand Singapore 61 03 9800 5600 64 07 579 0163 65 6844 2338 www.adlt.com.au www.adlt.co.nz www.adlt.com.sg