CF Series 12” / 16” / 23”Canopy Fixture HOUSING / LENS / OPTICS The seamless, die cast aluminum housing is standard with a weather-resistant bronze polyester powder topcoat. The doorframe fits flush with the housing. Complete silicon gasketing between door and housing provides a watertight seal. Removable hinged door supports easy maintenance. All CF Series fixtures are supplied with C73 prismatic glass for ideal performance and light distribution. The CF Series reflector comes standard with hammertone aluminum optics. MOUNTING Three knockouts located in the base of the cast aluminum housing are provided to mount the fixture to steel, concrete ceiling, or canopy. Not suitable for mounting to ceilings with combustible material. 50-400W PHOTOMETRIC DATA 400W PSMH CF Series at 15’ mounting height (Isofootcandle Plots) 30' 20' 10' 30' LAMP / BALLAST All fixtures are standard with high-power factor multi-tap or 480V ballasts. Induction electronic generator/ballast is 120- 277V, 50/60 Hz. LED 120 to 277V electronic driver/power supply with surge protection. The CFM Series utilizes mogul base lamps. The CFS utilizes medium base lamps. Induction lamps are 100,000 hour lamp life, circular style. Standard color temperature is 5000K with a > 80 CRI. 0 10' 20' Lamp Included 30 .5 1 Ideally suited for indoor parking areas, canopies or walkways with a mounting height above 15’. Also ideal for building-mounted security lighting. 3 20' 10 10' 7 20 0' 10' WIRING A knockout is located in the ballast compartment of the CFM housing. Additional knockouts are located on the sidewalls of the CFM housing. The CFS housing has multiple knockouts for mounting to junction boxes. Dark Sky compliant when mounted in down position 20' DARK SKY 30' Listed for Wet Locations Consult Factory for cUL Availability CF Series Ordering Information SERIES MOUNTING LIGHT SOURCE CFS (12” ) CFS and CFM only CFS and CFM only 5 = HPS CFM (16”) 0 = Hard Wire 8 = PSMH (Enclosed Rated) CFI (23”) CFS, CFM, CFL 3 = Ceiling Mount CFI only 1 = Induction LAMP WATTAGE CFS Only VOLTAGE CFS and CFM only 05 = 50W HPS, PSMH 07 = 70W HPS, PSMH 10 = 100W HPS, PSMH 15 = 150W HPS, PSMH M 4-Tap (120, 208, 240, 277VAC 60Hz, Tapped @ 277) 5 = 480 VAC 60Hz (175 PSMH only) CFI only U = 120-277VAC 50/60Hz Electronic CFM Only 17 = 175W PSMH 20 = 200W PSMH 25 = 250W PSMH, HPS 32 = 320W PSMH 35 = 350W PSMH 40 = 400W PSMH, HPS CFI Only 20 = 200W Induction Note: contact factory for other wattages OPTIONS Fusing ACCESSORIES (X)F = Single Fuse (specify voltage: 1 = 120V; 2 = 277V) (X)J = Dual Fuses (specify voltage: 3 = 208V; 4 = 240V; 5 = 480V) Q = Q uartz Standby, UL Listed (Non-delay Relay type; 100W to 400W HID only) Note: HID wattage must be higher than the quartz standby wattage. WT = White Housing WG - 12 = 12” Wire Guard (CFS) VS - 12 = 12” Polycarbonate Guard (CFS Vandal Shield) WG - 16 = 16” Wire Guard (CFM) VS - 16 = 16” Polycarbonate Guard (CFM Vandal Shield) WG - 23 = 23” Wire Guard (CFI) VS - 23 = 23” Polycarbonate Guard (CFI Vandal Shield) L Dimensions Fixture FixtureFixture Approx. Length Width Depth Ship Wt. CFS CFM CFI 12.4” 16.4” 23.4” 800 523-3602 12.4” 16.4” 23.4” 5.25” 7.0” 10.25” www.simkar.com 18 lbs. 32 lbs. 51 lbs. W D SPECIFICATIONS SUBJECT TO CHANGE. Parking and Canopy 299