FC Series Floodlight
50-1000W
Lamp Included
The FC Series provides concentrated, general
lighting in larger areas with controlled light spillage.
Featuring a sleek square design with rounded edges,
these floodlights are offered with either a 12”, 16”
or 23” die cast aluminum housing.
Listed for Wet Locations
Contact Factory for cUL Availability
HOUSING/OPTICS/LENS The die cast aluminum
housing with flush doorframe and rounded edges are
standard with bronze, black or white polyester powder
topcoat. Other colors available upon request. The 16”
and 23” housings can be rotated. The IES NEMA 7 x 7
cutoff luminaire, while minimizing light spill, is generally
positioned with a 15° to 25° vertical tilt to reduce glare
and obtain optimum performance. The 16” and 23”
housings have mounting knockouts on three sides that
allow the housing to be rotated 90 degrees either right or
left. A clear, tempered glass lens is held securely in a die
cast doorframe. Complete silicone gasketing around lens
frame and at mounting provide a watertight seal.
PHOTOMETRIC DATA (ISOFOOTCANDLE PLOTS)
BALLAST All fixtures come standard with a CWA, 4-Tap or
480V ballast. All units are supplied with a 36” SOW 16/3
cord. If no voltage is specified, cord is connected to highest
voltage.
100'
12” FCS
15’ mounting height, and 20° vertical tilt.
50'
25'
0'
75'
0'
25'
50'
75'
Lamp Included
16” FCM
25’ mounting height, and 30° vertical tilt.
100'
LAMPS
25'
50'
75'
25'
75'
50'
25'
0'
25'
50'
75'
100'
25'
12” housing: 50- 150W medium base lamp
16” housing: 70- 400W mogul base lamp
23” housing: 400- 1000W mogul base lamps
EPA RATINGS EPA Ratings are listed on page 256.
0'
25'
50'
75'
100'
125'
150'
23” FCL
30’ mounting height, and 20° vertical tilt.
Dimensions
FCS
FCM
FCL
125'
100'
75'
50'
25'
0
25'
50'
75'
100'
125'
50'
Fixture FixtureFixture Approx.
Length Width Depth Ship Wt.
12.4”
12.4” 5.25”
18 lbs.
16.4”
16.4”
7.0”
38 lbs.
23.4”
23.4” 10.25” 68 lbs.
25'
0
25'
50'
75'
100'
125'
150'
175'
W
L
D
238 Outdoor
SPECIFICATIONS SUBJECT TO CHANGE.
800 523-3602
www.simkar.com
FC Series Floodlight
FC Series Ordering Information
SERIES
MOUNTING
FCS = 12”
FCM = 16”
FCL = 23”
8 = Without Mounting
LIGHT SOURCE
FCS, FCM & FCL
5 = HPS
8 = PSMH (Enclosed)
LAMP
FCS Only
05 = 50W PSMH, HPS
FCS & FCM
07 = 70W PSMH, HPS
4 = MH (1000W only; enclosed) 10 = 100W PSMH, HPS
15 = 150W PSMH, HPS
FCL Only
FCM Only
17 = 175W PSMH
20 = 200W PSMH
25 = 250W PSMH, HPS
32 = 320W PSMH
35 = 350W PSMH
FCM and FCL
40 = 400W PSMH, HPS
FCL Only
75 = 750W PSMH
87 = 875W PSMH
99 = 1000W PSMH, MH, HPS
OPTIONS
Fusing
VOLTAGE
FCS
1 = 120V
2 = 277V
3 = 208V
4 = 240V
FCS, FCM & FCL
5 = 480V (150W and greater only)
M = 4-Tap (120, 208, 240, 277V 60Hz, Tapped @ 277)
M5 = 5-Tap (120, 208, 240, 277, 480VAC Tapped @ 480V)
Photocell Option (must replace M with 1, 2, 3, or 4 voltage for
4-Tap Ballasts):
1 = 120V
2 = 277V
3 = 208V
4 = 240V
5 = 480V
ACCESSORIES
WG-12 = 12” FCS Wire Guard
(X)F = Single Fuse (specify voltage: 1 = 120V; 2 = 277V)
VS-12 = 12” FCS Polycarbonate Vandal Shield
(X)J = Dual Fuses (specify voltage: 3 = 208V; 4 = 240V; 5 = 480V)
WG-16 = 16” FCM Wire Guard
VS-16 = 16” FCM Polycarbonate Vandal Shield
Q = Quartz Standby, UL Listed, Lamp included
WG-23 = 23” FCL Wire Guard
P(x) = Twist + Lock Photocell; NEMA receptacle and sensor. (FCM and FCL only; VS-23 = 23” FCL Polycarbonate Vandal Shield
specify voltage)
MA3 = 2” Adjustable Slip Fitter
MA4 = Yoke Mount for FCS and FCM
WT* = White Housing
MA4H = 23” FCL Yoke Mount
BK* = Black Housing
* Custom colors available: contact factory for pricing and delivery
MA3
2” Adjustable
Slip Fitter
800 523-3602
www.simkar.com
MA4
Yoke Mount
MA2T10
6” Arm - 10° Tilt
MA5T10
12” Arm - 10° Tilt
MA2T20
6” Arm - 20° Tilt
MA5T20
12” Arm - 20° Tilt
SPECIFICATIONS SUBJECT TO CHANGE.
Outdoor 239