Surface Backbox
(2 Gang/4-inch Square)
A UTC Fire & Security Company
Effective: April 2008
K-84-101
FEATURES
•
•
1/2-inch and 3/4-inch EMT Knockouts on All Four Sides
and the Back
18 Gauge Steel
•
•
Appliance/Device Mounting Holes
Universal Mounting Pattern
DESCRIPTION
The Kidde Surface Mount Backbox is the ideal solution
for devices that require a professional surface
installation. Each Backbox has a solid surface area with
predrilled and tapped hole configurations to mount the
devices.
The Backbox is painted with red enamel and is provided
with five 1/2-inch and 3/4-inch knockouts strategically
located. The Backbox comes with a green ground screw
and is easily accessible.
TECHNICAL SPECIFICATIONS
Material:
18 gauge steel (.048 thick)
Dimensions:
4-5/8-inch H x 4-5/8-inch W x 2-inch D
(117 mm H x 117 mm W x 51 mm D)
4-5/8 in.
(117 mm)
ORDERING INFORMATION
4-5/8 in.
(117 mm)
Part Number
Description
Shipping
Weight
06-236881-001
Surface Mount
Backbox
14 oz.
(397 g)
2 in.
(51 mm)
Figure 1. Dimension Details
This literature is provided for informational purposes only. KIDDE-FENWAL, INC. assumes
no responsibility for the product’s suitability for a particular application. The product must be
properly applied to work correctly.
If you need more information on this product, or if you have a particular problem or question,
contact KIDDE-FENWAL, INC., Ashland, MA 01721. Telephone: (508) 881-2000.
K-84-101
Rev AA
© 2008 Kidde-Fenwal Inc.
Printed in USA
Kidde Fire Systems
A UTC Fire & Security Company
400 Main Street
Ashland, MA 01721
Ph: 508.881.2000
Fax: 508.881.8920
www.kiddefiresystems.com