MWS
D es c r ip tion
MWS, Modular Wiring Systems, provides low cost installation of branch
circuit wiring for lighting and power. Using modular components
that plug together, MWS can be installed in a fraction of the time of
hardwiring.
Catalog #
The MWS Circuit T (CT) feeds power to Industrial HID and Fluorescent
lighting fixtures wired with Drop SO Cords (DS) or Drop Cables (DC).
Comments
MWS Circuit T provides circuit selection at each fixture plus allows
fixtures to be disconnected without interrupting power downstream.
Prepared by
®
Type
Project
Date
Des ign Fea tur es
• UL Listed under Standard 183 for
make or break under load.
• Meets requirements of Article 604
of the National Electrical Code.
• MWS componenets assembled
with 12 AWG/10 AWG conductors
rated at 20 amperes with full size
ground wire.
• Copper conductors are THHN
insulated wire rated 90°C.
• Valox 365 constructed
contact housing approved for
environmental air plenums.
• Feeds power to luminaires wired
with Drop SO Cords (DC) or Cables
(DC).
• Unique double-blade contact
ensures proper mating of electrical
components to prevent pushback
or pullout.
Catalog number description
indicates circuit selection.
BK=Black or Hot #1
RD=Red or Hot #2
BU=Blue or Hot #3
BR=Hots #1+ #2
RB=Hots #2 + #3
BB=Hots #1 + #3
BY=Hots #3 + #4
NB=Neutral #1 + Hot #1
NR=Neutral #2 + Hot #2
CT
All unused outlets require a MWS
dust cover. MWS ST, SP, SD , C T
and TC are shipped with one dust
cover attached.
• Galvanized steel exterior with
integral keying for voltage and
amperage.
Circuit T
Modular Wiring System
D im ens iona l D a ta
Front
2-1/4"
[57mm]
1-13/16"
[45mm]
2-1/4"
[57mm]
MWS AUTOCAD DRAFTING
MWS offers AutoCAD
drafting to layout
MWS, providing the
contractor with
additional benefits.
Top
MWS design layout time is reduced.
Bills of material are computer-generated
guaranteeing accuracy.
MWS drawing symbols and details
standardized.
Layouts are available on CD or e-mail.
To utilize this service and for additional
information, contact the MWS Sales
Department (888) 487-4887.
All electrical boxes, conduit, connections
and switches by others.
Install dust covers on unused open ends.
Scale is exaggerated on fixtures and
MWS system applications.
YS
TEM
S
S
Specifications and dimensions subject to change without notice.
ER
C
Consult your representative for additional options and finishes.
D
5-5/16"
[136mm]
TIFIE
ADF031849
2013-02-05 16:22:05
M W S CT
SYSTEM VIEW (not to scale)
Circuit T
Extender Cable
Extender Cable
DS Cord
Circuit T
DS Cord
Circuit T (CT)
Feeds power through and taps desired circuit to other fixtures.
Typical MWS Wiring System Application shown utilizing Circuit T (CT).
Consult MWS Installation, Application and Specification Manual for
additional comprehensive system information.
Order ing I nf or m a tion
S A M P L E N U M B E R : 2 7 C T 1 2 /4 G B K
CT
Voltage
12=120V
20=208V
24=240V
27=277V
34=347V
48=480V
Component
CT=Circuit T
Conductors and Size
10/4G=10 gauge, 5 wires through
Black/White/Red/Blue/Green
12/4G=12 gauge, 5 wires through
Black/White/Red/Blue/Green
NOTE Specifications and Dimensions subject to change without notice.
Wiring
Options
120V/ 277V/ 347V
BK=3 Circuits through + Ground + Neutral Black/White/Green Down
BU=3 Circuits through + Ground + Neutral Blue/White/Green Down
RD=3 Circuits through + Ground + Neutral Red/White/Green Down
2N=2 Neutral
208V/ 240V/ 480V
BB=4 Hots + Ground through Black/Blue/Green Down
BR=4 Hots + Ground through Black/Red/Green Down
BY=4 Hots + Ground through Blue/Yellow/Green Down
NB=5 wires through with Black, Ground and Neutral for the Black Wires Down
NR=5 wires through with Red, Ground and Neutral for the Red Wires Down
RB=4 Hots + Ground through Red/Blue/Green Down
MWS AUTOCAD DRAFTING
MWS offers AutoCAD
drafting to layout
MWS, providing the
contractor with
additional benefits.
MWS design layout time is reduced.
Bills of material are computer-generated
guaranteeing accuracy.
MWS drawing symbols and details
standardized.
Layouts are available on CD or e-mail.
SH IP P ING D ATA
To utilize this service and for additional
information, contact the MWS Sales
Department (888) 487-4887.
UnitStandard
Wt.Qty./Carton
1.0 lb.
24
Specifications and dimensions subject to change without notice.
MWS • Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • TEL 770.486.4800 • FAX 770 468.4801
ADF031849
2013-02-05 16:22:05