Prospex® 140 Wallwash Downlight
140-XIC‐WW
Lensed Wallwash with specular darklight
reflctor and frosted linear spread lens as standard.
Low glare 40° visual cut off.
IP54 versions available.
Ref Number:
Specular reflector, white trim
140-XIC-WW‐PS-WH
140-XSM-WW‐SS-WH Stain silver reflector, white trim
White reflector, white trim
140-XSM-WW‐WH-WH
Black reflector, white trim
140-XSM-WW‐BK-WH
140-XSM-WW‐CG-WH Champagne gold reflector, white trim
Lamp quantity
1
Module Type
max output
max wattage
max driver
max depth X
XTM
5000lm
46.8w
1400mA
201mm
XTA
3000lm
34.1w
1050mA
201mm
XTV83
5000lm
46.8w
1400mA
201mm
XTV98
3000lm
34.1w
1050mA
201mm
Module Type
max output
max wattage
max driver
max depth X
XTM9
2000lm
30.2w
1050mA
176mm
XTA9
2000lm
42.1w
1400mA
201mm
XTV983
2000lm
30.2w
1050mA
176mm
XTV998
2000lm
42.1w
1400mA
201mm
max. depth is based on max lumen output with the deepest reflector @ ambient temperature 35°C.
other combinations may vary
www.lucent-lighting.com
Adjustable
Aperture
Overall dimension
Overall height
Required depth
First fix requirement*
Ceiling cut out
Ceiling thickness
Ingress protection**
Dimming options***
No
108mm Ø
140mm Ø
185mm (passive)
X + MIN 25mm
No
128mm Ø
25mm MAX
IP20
Phase/DALI/1-10v
Cut out 128mmØ
Adjust the depth by the following for different
lumen output modules.
Module Type
4000lm
3000lm
2000lm
1300lm
Module Type
1300lm
700lm
XTM/XTV83
XTA/XTV98
Depth - 0mm
Depth -26mm
Depth -26mm
Depth -26mm
Depth - 52mm
Depth - 52mm
XTM9
XTA9
Depth - 27mm
Depth -26mm
Depth - 27mm
Depth - 52mm
Module output always at the maximum drive current.
*First Fix requirement. No first fix requirement, please refer to Lucent Installation Instructions
**IP Rating. Tested from underside of the ceiling.
***Dimming. Whilst Lucent can offer the majority of its luminaires with various dimming options, it
the
responsibility
to check and ensure compatibility of any control
*remains
Separate
die
cast plasterofinthe
kit specifier/installer
for plaster ceilings.
equipment
used.
Additional
cabling
be required
depending
on of
thecode.
dimming protocol specified.
**
Tested from
ceiling
underside.
Tomay
specify
IP54; add
'-IP' to end
***
Dimming
options
depend
on driver
(toimprove
be separately
policy of Lucent
Lighting
to continually
review and
its products ordered/specified).
and therefore reserve the right to change any details of product or
It is the
withdraw
specifications
prior notice.
Some
controlwithout
methods
may require additional cabling
Luminaires designed to comply with EN60598 and all other relevant Standards.
This Specification Sheet supersedes all previous versions
All intellectual
property
rights pertaining
to the
product
described
above and
to this document
are owned
or licensed
Lucent Lighting UK
Lucent
reserve
the right
to change
any
details,
dimensions
colours
etc without
priorbynotice.
Anyto reproduction
of Ltd.
We reserve our right to take whatever action is necessary to protect those intellectual property rights.
Lucent
products is strictly forbidden .. perpetrators will be pursued! Information correct as of May 2012.
Please notify Lucent Lighting Ltd of any inaccuracies immediately. E&OE
Job/Project Name
Area/Location
Contact Lucent Lighting: e: info@lucent-lighting.com t: +44 (0)20 8442 0880
Europe
Fitting Ref
China
Quantity
Russia
Lucent Xicato LED Modules with 70mmØ Reflectors
Module Code Builder.
Lumen outputs shaded in gray are available with passive heatsink
for use with this luminaire type. Higher lumen outputs may be
available with active cooling. Please consult Lucent Lighting for
details.
XTM
XTA
XTV
XTM9
XTA9
XTV9
www.lucent-lighting.com
5000lm
4000lm
3000lm
2000lm
CRI
83
83
83
83
83
98
98
98
83
98
83
98
83
98
83
83
83
83
83
98
98
98
83
98
83
98
83
98
1300lm
Type
Lumen output at maximum drive current.
700lm
Module
Colour
temp (K)
27/30/35/40
27/30/35/40
27/30/35/40
27/30/35/40
27/30/35/40
27/30/35/40
27/30/35/40
27/30/35/40
30
30
30
30
30
30
30
30
27/30/35/40
27/30/35/40
27/30/35/40
27/30/35/40
27/30/35/40
27/30/35/40
30
30
30
30
30
30
Reflector (70Ø)
Beam angle (°)
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
41
41
41
41
41
41
41
41
41
41
41
41
Max. Drive
Wattage
Current (mA)
700mA
700mA
1050mA
1400mA
1400mA
700mA
1050mA
1050mA
700mA
700mA
1050mA
1050mA
1050mA
1050mA
1400mA
1400mA
700mA
700mA
1050mA
700mA
1050mA
1400mA
700mA
700mA
700mA
1050mA
1050mA
1400mA
(W)
11.7
19.5
29.3
39.1
46.8
15.6
26.4
34.1
11.7
15.6
19.5
26.4
29.3
34.1
39.1
46.8
7.8
15.6
30.2
9.7
24.3
42.1
7.8
9.7
15.6
24.3
30.2
42.1
7
Xictao Module Type
Required.
Lumen Output.
(Refer to luminaire speification sheet
for maximum permitted output)
Colour temperature required
* Separate die cast plaster in kit for plaster ceilings.
** Tested from ceiling underside. To specify IP54; add '-IP' to end of code.
***
Dimming
options
depend
on driver
(toimprove
be separately
policy of Lucent
Lighting
to continually
review and
its products ordered/specified).
and therefore reserve the right to change any details of product or
It is the
withdraw
specifications
prior notice.
Some
controlwithout
methods
may require additional cabling
Diameter of reflector (70mm)
Beam angle required.
Luminaires designed to comply with EN60598 and all other relevant Standards.
This Specification Sheet supersedes all previous versions
All intellectual
property
rights pertaining
to the
product
described
above and
to this document
are owned
or licensed to Lucent Lighting UK Ltd.
Lucent
reserve
the right
to change
any
details,
dimensions
colours
etc without
priorbynotice.
We reserve our right to take whatever action is necessary to protect those intellectual property rights.
Please notify Lucent Lighting Ltd of any inaccuracies immediately. E&OE
Job/Project Name
Area/Location
Contact Lucent Lighting: e: info@lucent-lighting.com t: +44 (0)20 8442 0880
Fitting Ref
Quantity
Lucent Xicato LED Modules with 70mmØ Reflectors
Module Code Builder.
Indicates modules available in the range.
Refer to the luminaire specification for maximum modules permitted.
XTB
5000lm
4000lm
3000lm
2000lm
CRI
95
95
1300lm
Type
Lumen output at maximum drive current.
700lm
Module
Colour
Reflector (70Ø)
Max. Drive
Wattage
temp (K)
27
27
Beam angle (°)
Current (mA)
700mA
1050mA
(W)
15.6
26.4
23/42/57
23/42/57
7
Xictao Module Type
Required.
Lumen Output.
(Refer to luminaire speification sheet
for maximum permitted output)
Diameter of reflector (70mm)
Colour temperature required
Beam angle required.
www.lucent-lighting.com
* Separate die cast plaster in kit for plaster ceilings.
** Tested from ceiling underside. To specify IP54; add '-IP' to end of code.
***
Dimming
options
depend
on driver
(toimprove
be separately
policy of Lucent
Lighting
to continually
review and
its products ordered/specified).
and therefore reserve the right to change any details of product or
It is the
withdraw
specifications
prior notice.
Some
controlwithout
methods
may require additional cabling
Luminaires designed to comply with EN60598 and all other relevant Standards.
This Specification Sheet supersedes all previous versions
All intellectual
property
rights pertaining
to the
product
described
above and
to this document
are owned
or licensed to Lucent Lighting UK Ltd.
Lucent
reserve
the right
to change
any
details,
dimensions
colours
etc without
priorbynotice.
We reserve our right to take whatever action is necessary to protect those intellectual property rights.
Please notify Lucent Lighting Ltd of any inaccuracies immediately. E&OE
Job/Project Name
Area/Location
Contact Lucent Lighting: e: info@lucent-lighting.com t: +44 (0)20 8442 0880
Fitting Ref
Quantity