163-XIC - Lucent Lighting

advertisement
Prospex® 160 Accent Downlight
163-XIC
Fixed and accent downlights with specular darklight cone
reflector as standard. Adjustable fixtures with gear driven
vertical adjustment.
Hot aiming simplifies focusing while lamp is on. Aiming
remains locked in focus throughout re-lamping with built
in memory.
Low glare 40° visual cut off.
IP54 versions available.
Ref Number:
163-XIC-PS-WH
163-XIC-SS-WH
163-XIC-WH-WH
163-XIC-BK-WH
163-XIC-CG-WH
Specular reflector, white trim
Stain silver reflector, white trim
White reflector, white trim
Black reflector, white trim
Champagne gold reflector, white trim
Module Type
max output
max wattage
max driver
max depth X
XTM
5000lm
46.8w
1400mA
216mm
XTA
3000lm
34.1w
1050mA
216mm
XTV83
5000lm
46.8w
1400mA
216mm
XTV98
3000lm
34.1w
1050mA
216mm
Module Type
max output
max wattage
max driver
max depth X
XTM9
2000lm
30.2w
1050mA
216mm
XTA9
2000lm
42.1w
1400mA
216mm
XTV983
2000lm
30.2w
1050mA
216mm
XTV998
2000lm
42.1w
1400mA
216mm
max. depth is based on max lumen output with the deepest reflector @ ambient temperature 35°C.
other combinations may vary
www.lucent-lighting.com
Lamp quantity
Lamp
Adjustable
Aperture
Overall dimension
Required depth
First fix requirement
Ceiling cut out
Ceiling thickness
Ingress protection**
Dimming options*
Cut out 144mmØ
1
Xicato modules
35°
134mm Ø
160mm Ø
Height +25mm minimum clearance
No
144mm Ø
25mm MAX
IP20
Phase/DALI/1-10v
Adjust the depth by the following for different
lumen output modules.
Module Type
4000lm
3000lm
2000lm
1300lm
Module Type
1300lm
700lm
XTM/XTV83
XTA/XTV98
Depth - 0mm
Depth -8mm
Depth -23mm
Depth -8mm
Depth -23mm
Depth -23mm
XTM9
XTA9
Depth -8mm
Depth -8mm
Depth -23mm
Depth -23mm
Module output always at the maximum drive current.
*Dimming. Whilst Lucent can offer the majority of its luminaires with various dimming options, it
remains the responsibility of the specifier/installer to check and ensure compatibility of any control
equipment used. Additional cabling may be required depending on the dimming protocol specified.
* **IP
Separate
dieTested
cast plaster
in kit for plaster
ceilings.
from underside
of the ceiling.
Rating.
** Tested from ceiling underside. To specify IP54; add '-IP' to end of code.
***
options
depend
on driver
separately
the policy of Lucent
Lighting
to continually
review(to
and be
improve
its productsordered/specified).
and therefore reserve the right to change any details of product or
It is Dimming
withdraw
specifications
without prior may
notice.require additional cabling
Some
control methods
Luminaires designed to comply with EN60598 and all other relevant Standards.
This Specification Sheet supersedes all previous versions
All intellectual
property
rightsto
pertaining
to any
the product
described
above and
to this document
are owned
or licensed
Lucent Lighting of
UK Ltd.
Lucent
reserve
the right
change
details,
dimensions
colours
etc without
prior by
notice.
Anytoreproduction
We reserve
our right
take whatever
action..isperpetrators
necessary to protect
intellectualInformation
property rights.correct as of May 2012.
Lucent
products
is tostrictly
forbidden
will those
be pursued!
Please notify Lucent Lighting Ltd of any inaccuracies immediately. E&OE
Job/Project Name
Area/Location
Contact Lucent Lighting: e: info@lucent-lighting.com t: +44 (0)20 8442 0880
Europe
Fitting Ref
China
Quantity
Russia
Lucent Xicato LED Modules with 111mmØ Reflectors
Module Code Builder.
Indicates modules available in the range.
Refer to the luminaire specification for maximum modules permitted.
Module
XTM
XTA
XTV
XTM9
XTA9
XTV9
www.lucent-lighting.com
5000lm
4000lm
3000lm
2000lm
1300lm
CRI
83
83
83
83
83
98
98
98
83
98
83
98
83
98
83
83
83
83
83
98
98
98
83
98
83
98
83
83
700lm
Type
Lumen output at maximum drive current.
Colour
temp (K)
27/30/35/40
27/30/35/40
27/30/35/40
27/30/35/40
27/30/35/40
27/30/35/40
27/30/35/40
27/30/35/40
30
30
30
30
30
30
30
30
27/30/35/40
27/30/35/40
27/30/35/40
27/30/35/40
27/30/35/40
27/30/35/40
30
30
30
30
30
30
Reflector (111Ø)
Beam angle (°)
15/25/40
15/25/40
15/25/40
15/25/40
15/25/40
15/25/40
15/25/40
15/25/40
15/25/40
15/25/40
15/25/40
15/25/40
15/25/40
15/25/40
15/25/40
15/25/40
8/18/31/57
8/18/31/57
8/18/31/57
8/18/31/57
8/18/31/57
8/18/31/57
8/18/31/57
8/18/31/57
8/18/31/57
8/18/31/57
8/18/31/57
8/18/31/57
Max. Drive
Wattage
Current (mA)
700mA
700mA
1050mA
1400mA
1400mA
700mA
1050mA
1050mA
700mA
700mA
1050mA
1050mA
1050mA
1050mA
1400mA
1400mA
700mA
700mA
1050mA
700mA
1050mA
1400mA
700mA
700mA
700mA
1050mA
1050mA
1400mA
(W)
11.7
19.5
29.3
39.1
46.8
15.6
26.4
34.1
11.7
15.6
19.5
26.4
29.3
34.1
39.1
46.8
7.8
15.6
30.2
9.7
24.3
42.1
7.8
9.7
15.6
24.3
30.2
42.1
11
Xictao Module Type
Required.
Lumen Output.
(Refer to luminaire speification sheet
for maximum permitted output)
Colour temperature required
* Separate die cast plaster in kit for plaster ceilings.
** Tested from ceiling underside. To specify IP54; add '-IP' to end of code.
***
Dimming
options
depend
on driver
(toimprove
be separately
policy of Lucent
Lighting
to continually
review and
its products ordered/specified).
and therefore reserve the right to change any details of product or
It is the
withdraw
specifications
prior notice.
Some
controlwithout
methods
may require additional cabling
Diameter of reflector (111mm)
Beam angle required.
Luminaires designed to comply with EN60598 and all other relevant Standards.
This Specification Sheet supersedes all previous versions
All intellectual
property
rights pertaining
to the
product
described
above and
to this document
are owned
or licensed to Lucent Lighting UK Ltd.
Lucent
reserve
the right
to change
any
details,
dimensions
colours
etc without
priorbynotice.
We reserve our right to take whatever action is necessary to protect those intellectual property rights.
Please notify Lucent Lighting Ltd of any inaccuracies immediately. E&OE
Job/Project Name
Area/Location
Contact Lucent Lighting: e: info@lucent-lighting.com t: +44 (0)20 8442 0880
Fitting Ref
Quantity
Lucent Xicato LED Modules with 111mmØ Reflectors
Module Code Builder.
Indicates modules available in the range.
Refer to the luminaire specification for maximum modules permitted.
XTB
5000lm
4000lm
3000lm
2000lm
CRI
95
95
1300lm
Type
Lumen output at maximum drive current.
700lm
Module
Colour
Reflector (111Ø)
Max. Drive
Wattage
temp (K)
27
27
Beam angle (°)
Current (mA)
700mA
1050mA
(W)
15.6
26.4
15/25/40
15/25/40
11
Xictao Module Type
Required.
Lumen Output.
(Refer to luminaire speification sheet
for maximum permitted output)
Diameter of reflector (111mm)
Colour temperature required
Beam angle required.
www.lucent-lighting.com
* Separate die cast plaster in kit for plaster ceilings.
** Tested from ceiling underside. To specify IP54; add '-IP' to end of code.
***
Dimming
options
depend
on driver
(toimprove
be separately
policy of Lucent
Lighting
to continually
review and
its products ordered/specified).
and therefore reserve the right to change any details of product or
It is the
withdraw
specifications
prior notice.
Some
controlwithout
methods
may require additional cabling
Luminaires designed to comply with EN60598 and all other relevant Standards.
This Specification Sheet supersedes all previous versions
All intellectual
property
rights pertaining
to the
product
described
above and
to this document
are owned
or licensed to Lucent Lighting UK Ltd.
Lucent
reserve
the right
to change
any
details,
dimensions
colours
etc without
priorbynotice.
We reserve our right to take whatever action is necessary to protect those intellectual property rights.
Please notify Lucent Lighting Ltd of any inaccuracies immediately. E&OE
Job/Project Name
Area/Location
Contact Lucent Lighting: e: info@lucent-lighting.com t: +44 (0)20 8442 0880
Fitting Ref
Quantity
Download