Prospex® 100 Trimless Accent
100‐XIC‐TL
Fixed and accent downlights with specular darklight
cone reflector as standard. Adjustable fixtures with gear
driven vertical adjustment.
Hot aiming simplifies focussing while lamp is on. Aiming
remains locked in focus throughout re‐lamping with
built in memory.
Low glare 40° visual cut off.
IP54 versions available on fixed version.
Ref Number:
100‐XIC‐TL‐PS‐WH
100‐XIC‐TL‐SS‐WH
100‐XIC‐TL‐WH‐WH
100‐XIC‐TL‐BK‐WH
100‐XIC‐TL‐CG‐WH
Specular reflector, white trim
Satin silver reflector, white trim
White reflector, white trim
Black reflector, white trim
Champagne gold reflector, white trim
Module Type
max output
max wattage
max driver
max depth X
XTM
2000lm
19.5w
700mA
168mm
XTA
1300lm
15.6w
700mA
168mm
XTV83
2000lm
19.5w
700mA
168mm
XTV98
1300lm
15.6w
700mA
168mm
Module Type
max output
max wattage
max driver
max depth X
XTM9
1300lm
15.6w
700mA
136mm
XTA9
700lm
9.7w
700mA
116mm
XTV983
1300lm
15.6w
700mA
136mm
XTV998
700lm
9.7w
700mA
116mm
Module Type
max wattage
max driver
max depth X
XLED50-SH
7.8w
700mA
107mm
XLED50-HE
10.9w
500mA
127mm
XLED50-HO
15.6w
700mA
145mm
XLED50-SH90
9.7w
700mA
107mm
XLED50-90
15.6w
700mA
145mm
max. depth is based on max lumen output with the deepest reflector @ ambient temperature 35°C.
other combinations may vary
www.lucent‐lighting.com
Lamp quantity
Lamp
Adjustable
Aperture
Overall dimension
Required depth
First fix requirement*
Ceiling cut out
Ceiling thickness
Ingress protection**
Dimming options***
Cut out 102mmØ
1
Xicato modules
No
75mm Ø
100mm Ø
Height +25mm minimum clearance
Yes
102mm Ø
25mm MAX
IP20/IP44
Phase/DALI/1‐10v
*First Fix requirement. Luminaire comprised of fixture body with separate reflector and trimless
installation kit, which is to be fitted to the ceiling before skimming. Ensure correct alignment of the
installation kit before the ceiling is skimmed & final assembly (see luminaire installation instructions
for details).
**IP Rating. Tested from underside of the ceiling.
Whilst
offer
majority
of its luminaires with various dimming options, it
****Dimming.
Separate die
cast Lucent
plastercan
in kit
forthe
plaster
ceilings.
remains
thefrom
responsibility
of the specifier/installer
to check
andto
ensure
compatibility
of any control
**
Tested
ceiling underside.
To specify IP44;
add '‐IP'
end of
code.
equipment
used.
Additional
cabling
may be
depending
on the dimming protocol specified.
***
Dimming
options
depend
on driver
(torequired
be separately
ordered/specified).
Lucent Lighting UK Ltd
1345 High Road
London N20 9HR
Some control methods may require additional cabling
It is the policy of Lucent Lighting to continually review and improve its products and therefore reserve the right to change any details of product or
withdraw specifications without prior notice.
Luminaires designed to comply with EN60598 and all other relevant Standards.
This Specification
supersedes
all previous
Lucent
reserveSheet
the right
to change
anyversions
details, dimensions colours etc without prior notice. Any reproduction of
All intellectual property rights pertaining to the product described above and to this document are owned by or licensed to Lucent Lighting UK Ltd.
Lucent
products is strictly forbidden .. perpetrators will be pursued! Information correct as of January 2014.
We reserve our right to take whatever action is necessary to protect those intellectual property rights.
Please notify Lucent Lighting Ltd of any inaccuracies immediately. E&OE
Job/Project Name
Area/Location
Contact Lucent Lighting: e: info@lucent-lighting.com t: +44 (0)20 8442 0880
Fitting Ref
Tel: +44 (0)20 8442 0880
Fax: +44 (0)20 8444 6998
email: info@lucent‐lighting.com
Europe
China
Quantity
Russia
Lucent Xicato LED Modules with 50mmØ Reflectors
Module Code Builder.
Lumen outputs shaded in gray are available with passive heatsink
for use with this luminaire type. Higher lumen outputs may be
available with active cooling. Please consult Lucent Lighting for
details.
Module
XTM
XTA
XTV
XTM9
XTA9
XTV9
www.lucent-lighting.com
5000lm
4000lm
3000lm
2000lm
1300lm
CRI
83
83
83
83
83
98
98
98
83
98
83
98
83
98
83
83
83
83
83
98
98
98
83
98
83
98
83
83
700lm
Type
Lumen output at maximum drive current.
Colour
Reflector (50Ø)
Beam angle (°)
temp (K)
27/30/35/40
27/30/35/40
27/30/35/40
27/30/35/40
27/30/35/40
27/30/35/40
27/30/35/40
27/30/35/40
30
30
30
30
30
30
30
30
27/30/35/40
27/30/35/40
27/30/35/40
27/30/35/40
27/30/35/40
27/30/35/40
30
30
30
30
30
30
25/43/55
25/43/55
25/43/55
25/43/55
25/43/55
25/43/55
25/43/55
25/43/55
25/43/55
25/43/55
25/43/55
25/43/55
25/43/55
25/43/55
25/43/55
25/43/55
15/25/37
15/25/37
15/25/37
15/25/37
15/25/37
15/25/37
15/25/37
15/25/37
15/25/37
15/25/37
15/25/37
15/25/37
Max. Drive
Current (mA)
700mA
700mA
1050mA
1400mA
1400mA
700mA
1050mA
1050mA
700mA
700mA
1050mA
1050mA
1050mA
1050mA
1400mA
1400mA
700mA
700mA
1050mA
700mA
1050mA
1400mA
700mA
700mA
700mA
1050mA
1050mA
1400mA
Wattage
(W)
11.7
19.5
29.3
39.1
46.8
15.6
26.4
34.1
11.7
15.6
19.5
26.4
29.3
34.1
39.1
46.8
7.8
15.6
30.2
9.7
24.3
42.1
7.8
9.7
15.6
24.3
30.2
42.1
5
Xictao Module Type
Required.
Lumen Output.
(Refer to luminaire speification sheet
for maximum permitted output)
Colour temperature required
* Separate die cast plaster in kit for plaster ceilings.
** Tested from ceiling underside. To specify IP54; add '-IP' to end of code.
***
Dimming
options
depend
on driver
(toimprove
be separately
policy of Lucent
Lighting
to continually
review and
its products ordered/specified).
and therefore reserve the right to change any details of product or
It is the
withdraw
specifications
prior notice.
Some
controlwithout
methods
may require additional cabling
Diameter of reflector (50mm)
Beam angle required.
Luminaires designed to comply with EN60598 and all other relevant Standards.
This Specification Sheet supersedes all previous versions
All intellectual
property
rights pertaining
to the
product
described
above and
to this document
are owned
or licensed to Lucent Lighting UK Ltd.
Lucent
reserve
the right
to change
any
details,
dimensions
colours
etc without
priorbynotice.
We reserve our right to take whatever action is necessary to protect those intellectual property rights.
Please notify Lucent Lighting Ltd of any inaccuracies immediately. E&OE
Job/Project Name
Area/Location
Contact Lucent Lighting: e: info@lucent-lighting.com t: +44 (0)20 8442 0880
Fitting Ref
Quantity
Lucent Xicato LED Modules with 50mmØ Reflectors
Module Code Builder.
Indicates modules available in the range.
Refer to the luminaire specification for maximum modules permitted.
Max depth (X) forXTB is equivalent of the XTV98 module as detailed in the table on page 1 of the specification sheet.
Module
XTB
5000lm
4000lm
3000lm
2000lm
CRI
95
95
1300lm
Type
700lm
Lumen output at maximum drive current.
Colour
Reflector (50Ø)
Max. Drive
Wattage
temp (K)
27
27
Beam angle (°)
Current (mA)
700mA
1050mA
(W)
15.6
26.4
25/43/55
25/43/55
5
Xictao Module Type
Required.
Lumen Output.
(Refer to luminaire speification sheet
for maximum permitted output)
Diameter of reflector (50mm)
Colour temperature required
Beam angle required.
Lucent XLED50 Module Code Builder
Indicates modules available in the range.
Refer to the luminaire specification for maximum modules permitted.
Module
Type
www.lucent-lighting.com
XLED50-SH
XLED50-HE
XLED50-HO
XLED50-SH-90
XLED50-90
Colour
CRI temp (K)
Beam angle (°)
Max. Drive
Current (mA)
Wattage
(W)
83 827/830/835/840
15/23/35
700mA
7.8
83 827/830/835/840
15/23/35
500mA
10.9
83 827/830/835/840
15/23/35
700mA
15.6
98 927/930/935/940
15/23/35
700mA
9.7
98 927/930/935/940
15/23/35
700mA
15.6
Optic
(50Ø)
XLED50 Module Type
Required.
Colour temperature required
Beam angle required
* Separate die cast plaster in kit for plaster ceilings.
** Tested from ceiling underside. To specify IP54; add '-IP' to end of code.
***
Dimming
options
depend
on driver
(toimprove
be separately
policy of Lucent
Lighting
to continually
review and
its products ordered/specified).
and therefore reserve the right to change any details of product or
It is the
withdraw
specifications
prior notice.
Some
controlwithout
methods
may require additional cabling
Luminaires designed to comply with EN60598 and all other relevant Standards.
This Specification Sheet supersedes all previous versions
All intellectual
property
rights pertaining
to the
product
described
above and
to this document
are owned
or licensed to Lucent Lighting UK Ltd.
Lucent
reserve
the right
to change
any
details,
dimensions
colours
etc without
priorbynotice.
We reserve our right to take whatever action is necessary to protect those intellectual property rights.
Please notify Lucent Lighting Ltd of any inaccuracies immediately. E&OE
Job/Project Name
Area/Location
Contact Lucent Lighting: e: info@lucent-lighting.com t: +44 (0)20 8442 0880
Fitting Ref
Quantity