NZQA Expiring unit standard
Title Manufacture flush doors
2519 version 9
Page 1 of 3
Level
Purpose
4 Credits 9
People credited with this unit standard are able to: set out door; prepare materials; and assemble door.
Classification Joinery > Door and Window Joinery
Available grade Achieved
Explanatory notes
1 All workplace practices must comply with current legislation, codes of practice, and documented site safety procedures for personal, product, and worksite safety.
2 Legislation and regulations relevant to this unit standard include but are not limited to
– Health and Safety in Employment Act 1992; Health and Safety in Employment
Regulations 1995.
Outcome 1
Set out door.
1.1
1.2
Type and size of door matches the working drawings. expiring
Type of door core and the materials used are identified from the specifications and an order is prepared in accordance with workplace practice.
1.3 The facings, clashings, and fixings are identified from the working drawings and an order is prepared in accordance with workplace practice.
Outcome 2
Prepare materials.
Evidence requirements
2.1 Door core is trimmed with minimum waste in accordance with workplace practice.
2.2 Facings and clashings are trimmed to size conform to the specification.

New Zealand Qualifications Authority 2020 Building and Construction Industry Training
Organisation
SSB Code 101562
This unit standard is expiring
New Zealand Qualifications Aut

NZQA Expiring unit standard
2.3 Adhesive is prepared to manufacturer’s specifications.
2519 version 9
Page 2 of 3
Outcome 3
Assemble door.
Evidence requirements
The door press set-up matches the size of the door. 3.1
3.2 Adhesive is applied and the door is assembled in accordance with workplace practice.
3.3 The door is completed to specifications or customer requirements.
Replacement information This unit standard, unit standard 2518, unit standard
2520, unit standard 2523, unit standard 2524, unit standard 2525, and unit standard 2542 have been replaced by unit standard 28218.
This unit standard is expiring. Assessment against the standard must take place by the last date for assessment set out below.
Status information and last date for assessment for superseded versions
Process Version Date Last Date for Assessment
Registration
Revision
Revision
Revision
Revision
1 16 August 1995 31 December 2018
This unit standard is
3 31 December 2018
4
5
16 August 1995 expiring
20 December 1999
31 December 2018
31 December 2018
Revision
Review
6
7
16 June 2005
23 January 2009
31 December 2018
31 December 2018
Review 8 24 October 2014 31 December 2018
Rollover 9 17 September 2015 31 December 2018
Consent and Moderation Requirements (CMR) reference 0073
This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do
.

New Zealand Qualifications Authority 2020 Building and Construction Industry Training
Organisation
SSB Code 101562
This unit standard is expiring
New Zealand Qualifications Aut

NZQA Expiring unit standard
Please note
2519 version 9
Page 3 of 3
Providers must be granted consent to assess against standards (accredited) by NZQA, before they can report credits from assessment against unit standards or deliver courses of study leading to that assessment.
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and which are assessing against unit standards must engage with the moderation system that applies to those standards.
Requirements for consent to assess and an outline of the moderation system that applies to this standard are outlined in the Consent and Moderation Requirements (CMR). The
CMR also includes useful information about special requirements for organisations wishing to develop education and training programmes, such as minimum qualifications for tutors and assessors, and special resource requirements.
This unit standard is expiring
Building and Construction Industry Training
Organisation
SSB Code 101562

New Zealand Qualifications Authority 2020
This unit standard is expiring
New Zealand Qualifications Aut