NZQA Expiring unit standard
2520 version 9
Page 1 of 3
Title
Manufacture exterior and interior door frames
Level
4
Credits
10
Purpose
People credited with this unit standard are able to: set out door
frame; machine door frame materials; and assemble door
frame.
Classification
Joinery > Door and Window Joinery
Available grade
Achieved
Explanatory notes
1
All workplace practices must comply with current legislation, codes of practice, and
documented site safety procedures for personal, product, and worksite safety.
2
Legislation and regulations relevant to this unit standard include but are not limited to
– Health and Safety in Employment Act 1992; Health and Safety in Employment
Regulations 1995.
Outcomes and evidence requirements
Outcome 1
Set out door frame.
This unit standard is
Door frame selected matches the working drawings and an order prepared in
expiring
accordance with workplace
practice.
Evidence requirements
1.1
1.2
Timber profile is determined from the working drawings and a cutting list
prepared in accordance with workplace practice.
1.3
The door frame set-out conforms to the working drawings.
Outcome 2
Machine door frame materials.
Evidence requirements
2.1
Timber is run to the profiles detailed on the working drawings.
2.2
Joints are worked to factory standard or working drawings.
Building and Construction Industry Training
Organisation
SSB Code 101562
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
2.3
2520 version 9
Page 2 of 3
Surfaces are finished as specified in accordance with workplace practice.
Outcome 3
Assemble door frame.
Evidence requirements
3.1
Door frame is assembled in accordance with workplace practice.
3.2
Door frame is completed to specifications or customer requirements.
Replacement information
This unit standard, unit standard 2518, unit standard
2519, unit standard 2523, unit standard 2524, unit
standard 2525, and unit standard 2542 have been
replaced by unit standard 28218.
This unit standard is expiring. Assessment against the standard must take place by
the last date for assessment set out below.
Status information and last date for assessment for superseded versions
Process
Version Date
Last Date for Assessment
Registration
1
16 August 1995
31 December 2018
Revision
2
16 August 1995
31 December 2018
Revision
3
16 August 1995
31 December 2018
Revision
This
unit standard
is
5
20 December 1999
31 December 2018
6
16 June 2005
31 December 2018
expiring
7
23 January 2009
31 December 2018
4
21 October 1997
31 December 2018
Review
8
24 October 2014
31 December 2018
Rollover
9
17 September 2015
31 December 2018
Revision
Revision
Review
Consent and Moderation Requirements (CMR) reference
0073
This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA,
before they can report credits from assessment against unit standards or deliver courses
of study leading to that assessment.
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
Building and Construction Industry Training
Organisation
SSB Code 101562
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
2520 version 9
Page 3 of 3
Providers and Industry Training Organisations, which have been granted consent and
which are assessing against unit standards must engage with the moderation system that
applies to those standards.
Requirements for consent to assess and an outline of the moderation system that applies
to this standard are outlined in the Consent and Moderation Requirements (CMR). The
CMR also includes useful information about special requirements for organisations wishing
to develop education and training programmes, such as minimum qualifications for tutors
and assessors, and special resource requirements.
This unit standard is
expiring
Building and Construction Industry Training
Organisation
SSB Code 101562
 New Zealand Qualifications Authority 2016